Laserfiche WebLink
DEC -16 -2009 16 =17 P. 04 <br /> 70948.01 - 109 -47 <br /> Architectural Testing Page 2 of 9 <br /> Test Specimen Descriptions: (Continued) <br /> e <br /> Test Specimen #1: H -R30 1219 x'2286 (48 x 90) (Flange) (Continued) <br /> Screen Size: 1156 mm (45 -1/2 ") wide by 900 mm (35- 7/16 ') high <br /> Overall Area: 2.79 m (30 ft <br /> Glazing Type: The unit was , ; glazed with 1/2" thick sealed insulating glass fabricated <br /> from two sheets of 1/8" thick clear annealed glass and an aim/limn -reinforced butyl <br /> spacer system. The sash and fisted lite were channel glazed witli.a wrap around rubber <br /> gasket. • <br /> Reinforcement: No reinforcement was utilized. <br /> Installation: The window wits installed into a #2 Spruce -- Paine -Fir wood buck. The <br /> window was secured with #8 x 1 -1/4" pan head screws located 5-1/2" from the head and <br /> sill and at the midspan on jambs. The head utilized screws located 3 -1/2" from jambs <br /> and one midspan. The exterior perimeter was sealed with silicone. <br /> Test Specimen #2: H-R.35 1219 x 2286 (48 x 90) (Fin) <br /> Overall Size; 1219 anm (48 ") wide by 2286 mm (90 ") high <br /> Sash Size: 1186 min (46- 11116 ") wide by 906 mm (35- 11/16 ") high <br /> Fixed Daylight Opening Size :, 1137 mm (44 -3/4 ") wide by 130Ii,mm (51 -1 /2 ") high <br /> Screen Size: 1156 min (45 -1/2 ") wide by 900 mm (357 /16 ").hi0 <br /> Overall Area: 2.79 m (30 ft <br /> Glazing Type: The top fixed lite was glazed with 1/2" thick sealed insulating glass <br /> fabricated from two sheets of 1/8" tempered glass and an aluminum reinforced butyl <br /> spacer system. The sash was glazed with 1/2" thick insulating glass fabricated from two <br /> sheets of 1/8" thick clear atmealed glass and an aluminum reinforced butyl spacer <br /> system. The sash and fixed lite were channel glazed with a wrap around rubber gasket. <br /> Reinforcement: No reinforcement was utilized. <br /> Installation: The window -was installed into a #2 Spruce- Pine -Fir wood test buck. The <br /> nail fin was set onto a bead of silicone and secured with #6 x 1 -5 /8" drywall screws, <br /> located 3" from each corner and 12" on center through the nail fiid into the wood buck. <br /> s. <br />