Laserfiche WebLink
DEC -16 - 2009 16:17 N <br /> 70948.01- 109-47 <br /> ,Architectural Testing Pagc 3 of , ", <br /> • <br /> 4i • <br /> Test Specimen Descriptions: (Continued) <br /> Test Steelman #3: 11-R40 1219 x,+2286 (48 x 90) (Fin) <br /> Overall Size: 1219 nun (48 ") wide by 2286 mm (90 ") high <br /> Sash Size: 1186 m (46- 11/16 ") wide by 906 mm (35- 11/16 ") high <br /> Fixed Daylight Opening Size: 1137 mm (44- 314 ") wide by 1308°mm (51 -1/2") high <br /> Screen Size: 1156 mm (45 -1 /2") wide by 900 mrn (35 -7/16 ")thigh <br /> Overall Area: 2.79 m (30 ft <br /> Glazing Type: The unit was glazed with a single sheet of 3J16'' elver annealed glass. • <br /> The sash and the fixed lite were ciarmel glazed with a wrap around" rubber gasket. <br /> Reinforcement: No reinforcement was utilized. <br /> Installation; The window was" installed into a #2 Spruce - Pine -Fir wood test buck. The <br /> nail fin was sets one) a bead of silicone and secured with #6 x • 1 -5/8" drywall screws . <br /> located 3" from each corner and 12" on center through the nail fin into the wood buck. <br /> The following d cripuons apply to all specimens. <br /> Finish: All aluminum was white. , <br /> Frame Construction: The frame was constructed from extruded elummum with coped, <br /> butted, and sealed comers. The corners were secured with two #6 x 3/81 ,pan head screws <br /> located through the jambs into the .sill and head screw boss. The" axed sash was secured to <br /> the frame with one #8 x 1/2" long square drive pan head screw at each corner, through the <br /> frame into the sash. <br /> Sash Construction: The sash were constructed of extruded alurfinum with coped, butted, <br /> and sealed corners. The corners were secured with one #6 x 5 /8" pan head screw through <br /> the stiles into the rails screw boss, <br />