Laserfiche WebLink
Evaluation Report 03901.06.05 -R1 <br /> IB Roof Systems, Inc., FL4672 -R1 <br /> Date of Issuance: 06/09/2005; Revised: 09/20/2006 <br /> Page Certificate of P 9 <br /> Authorization #9503 <br /> Manufacturer: IB Roof Systems, Inc. <br /> 2877 Chad Drive <br /> Eugene, OR 97408 <br /> Product Category: Roofing <br /> Sub - Category: Single PIy Roof Systems <br /> Evaluation Method: Method 1: Products specifically addressed in the FBC through performance criteria <br /> and standardized testing or comparative rational analysis methods. <br /> Compliance IB Single -Ply and IB Single Ply Fleeceback roof systems, as marketed by IB Roof <br /> Statement: Systems, Inc., have demonstrated compliance with the following sections of the <br /> Florida Building Code through testing in accordance with the following Standards. <br /> Compliance is subject to the Installation Requirements and Limitations / <br /> Conditions of Use set forth herein. <br /> Standards: Section Pronertv Standard Year <br /> 1504.3.1 Wind FM 4470 1992 <br /> 1504.6 Weathering ASTM G154 2000 <br /> 1504.7 Impact FM 4470 1992 <br /> 1507.13.2 Physicals ASTM D4434 1996 <br /> References: Entity Examination Reference Date <br /> FM Approvals FM 4470 3005937 11/23/1999 <br /> FM Approvals FM 4470 3005938 11/23/1999 <br /> FM Approvals FM 4470 3009502 12/21/2000 <br /> FM Approvals FM 4470 3015444 07/11/2003 <br /> FM Approvals FM 4470 3014692 08/05/2003 <br /> FM Approvals FM 4470 3012321 07/29/2006 <br /> FM Approvals FM 4470 2D5A9.AM 06/22/1999 <br /> FM Approvals FM 4470 3014751 08/27/2003 <br /> Underwriters Labs ASTM D4434 02NK18635 11/12/2003 <br /> Underwriters Labs ASTM G154 02NK18635 11/12/2003 <br /> Momentum Tech. ASTM D4434 EX23K2A 10/31/2002 <br /> Product / System IB Single Ply and IB Single Ply Fleeceback are nominal 40 -mil (1.0 mm) to 80 -mil <br /> Description: (2.0 -mm) thick polyester fabric (9x9, 1000 denier) reinforced plasticized polyvinyl <br /> chloride (PVC) roof cover with a white, gray, blue, brown, tan or green weathering <br /> surface and a black or gray underside. IB Single -Ply is supplied in rolls 72 in. (1.8 <br /> m) by 100 ft (33.3 m) long. Side and end laps are sealed using hot air welding. <br /> The roof cover is fully adhered to Approved substrates using IB Water Borne <br /> Adhesive or Ashland Pliobond 7008, as outlined in the Limitations / Conditions of <br /> Use herein. <br /> Quality Assurance 1. Listing through Underwriters Laboratories (QUA 1743). Continued QA <br /> Dq�tµ>pn: documentation comes in the form of the UL Mark on all product containers. <br /> 1��LV �� 2. Non -IB Roof System materials used in the system shall be manufactured <br /> All work shall comply with under a quality assurance program administered by a Florida DCA Approved <br /> prevailing codes for building, Quality Assurance Entity, and materials and /or packaging shall carry the <br /> plumbing, electrical, mechanical, appropriate labeling from the Quality Assurance Entity. <br /> as, pools and aluminum structures. <br /> Main Office: 80 Tesler Way • Suite 200 • Seattle, WA 98104 • Voice (206) 467 -0054 • Fax (206) 467 -5840 <br /> ERD East: 2 Mattoon Road • Waterbury, CT 06708 • Voice (203) 596 -7884 • Fax (203) 596 -7058 <br />