09-8907 - Laserfiche WebLink

Browse Search

• Evaluation Report 03901.06.05 -Ri IB Roof Systems, Inc., FL4672 -R1 ''.1"sr V Date of Issuance: 06/09/2005; Revised: 09/20/2006 � Page 3 of 4 Certificate of Authorization #9503 Installation Requirements: 1. IB Roof Systems roof covers shall be installed in accordance with IB Roof Systems' published installation instructions, subject to the Limitations / Conditions of Use noted below. 2. System wind Toad resistance information is set forth in Appendix 1. Limitations / Conditions of Use: 1. This Evaluation Report is not for use within the HVHZ. 2. Refer to a current Approved Roofing Materials Directory for fire ratings. 3. For steel deck installations, foam plastic insulation shall be separated from the building interior in accordance with FBC Section 2603.4 unless the exceptions stated in FBC Sections 2603.4.1 and 2603.8 apply. 3. Unless otherwise noted in Appendix 1, roof decking and its attachment shall be as specified by the Designer of Record to meet project design criteria to the satisfaction of the AHJ. 4. For recover installations, the existing roof shall be examined in accordance with FBC Section 1510. 5. For mechanically fastened insulation, the maximum design pressure for the selected assembly shall meet or exceed the field area (Zone 1) design criteria. Perimeter and corner areas (Zones 2 and 3) shall employ an attachment density designed by a qualified design professional to resist the elevated pressure criteria, up to the maximum performance of the membrane -to- insulation interface. 6. For adhered insulation, the maximum design pressure for the selected assembly shall meet or exceed critical design pressure determined in accordance with FBC Chapter 16. No rational analysis is permitted for these systems. 7. For mechanically fastened insulation to existing roof decks (reroof or recover), fasteners shall be tested in the existing deck for withdrawal resistance. A qualified design professional shall review the data for comparison to the minimum requirements for the system. Testing and analysis shall be in accordance with TAS 105. 8. For existing substrates in a re -roof (tear off) or recover Installation, the existing deck or existing roof surface shall be examined for compatibility with the membrane or insulation adhesive to be installed. If any surface conditions exist that bring system performance into question, field uplift testing in accordance with ASTM E907 or FM LPDS 1 -52 shall be conducted on mock -ups of the proposed new roof assembly. 9. For existing substrates in a recover installation, the existing roof system shall be capable of resisting project design pressures on its own merit to the satisfaction of the AHJ, as documented through field uplift testing in accordance with ASTM E907 or FM LPDS 1 -52. Certification of Independence: 1. ERD East does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or distributing products it evaluates. 2. ERD East is not owned, operated or controlled by any company manufacturing or distributing products it evaluates. 3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for which the evaluation reports are being issued. 4. Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved Nanielpproval process of the product. All work shall comply with prevailing codes for building, plumbing, electrical mechanical, gas, p00jiain,q�ffice }n W WaIC. Suite 200 • Seattle, WA 98104 • Voice (206) 467 -0054 • Fax (206) 467 -5840 ERD RD East: t: L 2 Mattoon Vi • Waterbury, CT 06708 • Voice (203) 596 -7884. Fax (203) 596 -7058