Laserfiche WebLink
Jul 06 07 10:29a Porter #4513 8638581559 p.8 <br /> • <br /> LAN <br /> ,r <br /> MULTIPRIi IE® 94 -258 Series <br /> HPC/lnduslrlal Maintenance MULTIPRJME® F a 2.8 VOC <br /> Generic — ype Tinting and 6.3se Information <br /> Modified Alkyd Resin Do Not Tint <br /> General Description 94 -258 Alkyd Fast Dry Primer -Red Oxide <br /> 94 -269 Alkyd Fast Dry Primer -Gray <br /> PITTSBURG/TO Paints Alkyd Fast Dry 2.8 VOC Univeral Primers <br /> are formulated especially to coat interior or exterior metal surfaces to <br /> prepare for most topcoats. Uses include parts, machinery, and other <br /> fabricated metal surfaces. May be topcoated with a variety of finishes <br /> including epoxies, urethanes, acrylics and other alkyds. <br /> Recommended Uses <br /> Ferrous Metal <br /> Product Data <br /> Gloss: Flat <br /> VOC *: 2.80 lbs/gal 340.00 g/L <br /> Coverage: 476 to 634 sq ft/gal (44 to 58 sq_ m13.78L) <br /> ,Note: Doer not include lou dot rovuryo applicorirmmer iod,ssofxe °rmixing. <br /> Features ! Benefits DFT: 1.5 minimum to 2.0 maximum <br /> Fusty 2.8 VOC compliant Weight/Gallon *: 13.6 lbs. (6.2 kg) +/- 0.3 lbs. (136 g) <br /> Univeral primer can be topcoated with most epoxies, alkyds, acrylics Volume Solids *: 59.3% +1 - 2 <br /> and urethanes. Weight Solids *: 79.9% +/ 2% <br /> Fast drying- recoat in 90 minutes (extended recoat times are required Clean - up: 97 - 727 PPG Thinner <br /> for acrylic topcoats). Results will linty by color, thinning and othcr additives. <br /> 'Product data cakulated on 94-2bg <br /> Performance offset to Federal Standards TT -P -645, TT-P -664, Drying Time: <br /> TT-P-1385 To Touch: 30 minutes <br /> To Handle: 1 hour <br /> To Recoat: See Limitations <br /> Dry Time ®77 °F (25 °G'); <br /> Limitations of Use <br /> Flash Point: 94-258 60°F, (15.6°C) <br /> Apply only when air and surface temperatures are above 50°F (10°C) 94- 269 56 °F, (I 3.3 °C) <br /> and surface is at least 5 (3 °C) above the dew point. Avoid exterior <br /> painting late in the day when dew or condensation can form or rain is <br /> threatening. For metal substrates only. Reooat: 90 minutes when <br /> topcoating with most solvent bome topcoats. Extended recoat times <br /> (24-48 hours) are required when topcoating with acrylic latex topcoats. <br /> Acrylic latex topcoats are recommended for low traffic areas only. All <br /> oil base alkyd products change color with age. The yellow discoloration <br /> rs moat visible in light colors. Drying times listed may vary depending <br /> on temperature, humidity and air movement. Spray equipment must be <br /> handled with due carc and in accordance with manufacturer's <br /> recommendation. DANGER: Rags, steel wool or waste soaked with <br /> this product may spontaneously catch fire if improperly discarded. <br /> Immediately after use, place rags, steel wool or waste in a sealed <br /> water -filled metal container. Refer to www.hpc.com, Spontaneous <br /> Combustion Advisory for additional information. <br />