Laserfiche WebLink
panel lap will be secured using a #12 -14 x'/" stitch screw with sealing washer at <br /> each rafter location (Page 10 — Fastener Location). With this accomplished, the <br /> under - lapping panel can be fastened down with the exception of the lowest rib. With <br /> this panel securely in place, now the lower rib of the overlapping panel can be <br /> fastened in place. <br /> 3. Continue steps 1 and 2 for the remainder of the roof allowing the panel to follow the <br /> contour of the structure's frame at the eave location (Detail E). If it is desired to <br /> continue the panels down the sidewall, do so using the same technique as step 1 <br /> and step 2. <br /> 4 . With all of the panels in place, the ridge cap can be fastened to the upper leg of the <br /> GrandBeam panel. Install #14- 14x1" Stitch Screws every 12 inches on center to <br /> secure the ridge cap (Ridge Detail). <br /> 4 <br />