10-10035 - Laserfiche WebLink

Browse Search

NOTE: AU CAUTIONS and WARNINGS are identified by the symbol L. All warnings are printed in bold capital letters . • WARNING: PLEASE READ THESE SPECIFICATIONS AND INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR APPLYING THIS PRODUCT. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS, CAUTIONS AND WARNINGS COULD RESULT IN IMPROPER APPLICATION, INSTALLATION AND /OR OPERATION OFTHESE PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU AND /OR OTHERS. General Notes: • Strobes are designed to flash at 1 flash per second minimum over their "Regulated Voltage Range" (16 -33v for 24VDC units and 8 -17.5v for 12VDC units). Regulated Voltage Range is the newest terminology used by UL to identify the listed voltage range. • All candela ratings represent minimum effective Multione Strobe intensity based on UL Standard 1971. • MT Strobe models are UL Standard 1971 Listed for indoor use with a temperature range of 32 °F to 120 °F (0 °C to 49 °C) and maximum humidity of 93% ±2%. The MT-12/24, MTWP and MT4 models and listed for outdoor use at -31°F to 150"F ( -35"C to 66 °C) and maximum humidity of 95% (See Data Sheet S9004 or Installation Instruction Sheet P84150 for more detail on MTWP). MTWP and MT4 strobes are listed under UL 1636. • MT Audible is UL Standard 464 Listed. Alarm Tones TONE ALARM TONES PATTERN DESCRIPTION HORN BROADBAND HORN (Continuous) BELL 1560 Hz MODULATED (0.07 sec, ON/Repeet) MARCH TIME HORN (0.25 sec. ON /0.25 sec. OFF/Repeat HORN CODE -3 HORN HORN (ANSI 53.41 Temporal Pattem) CODE -3 TONE 500 Hz (ANSI S3.41 Temporal Pattern) SLOW WHOOP 500 - 1200 Hz SWEEP (4.0 sec. ON/0.5 sec. OFF/Repeat) SIREN 600 -1200 Hz SWEEP (1.0 sec. ON/Repeat) HI/LO 1000 /800 Hz (0.25 sea ON/Altemate) • Table 1; dBA and Current Ratings for Multitone Audible Portion RMS Current (amps) dBA 1 Oft (UL Reverberant) 24 VDC 12 VDC 120 VAC 24 VDC. 12 VDC 120 VAC HI Output STD Output HI Output STD Output HI STD Output Output HI STD HI STD HI STD 24 UL 24 UL @ 24 UL oa 24 UL UL UL Output Output Output Output Output Output VDC max" VDC max" VDC max' VDC mar max' max* Hom 0.074 0.108 0.033 0.044 0.145 0.176 0.023 0.034 0.050 0.042 92 87 90 77 85 82 Bell 0.040 0.053 0,018 0,024 0.077 0.095 0.014 0.020 0.041 0.039 86 80 86 69 82 75 March Time 0.067 0.104 0.033 0,038 0.109 0.142 0.023 0.034 0.050 0.040 89 84 89 74 85 79 Horn Code -3 Hom 0.069 0.091 0.025 0.035 0.100 0.142 0.023 0.034 0.050 0.042 88 83 88 73 82 75 Code -3 Tone 0.061 0.075 0,026 0.035 0.088 0.105 0.015 0.021 0.042 0.040 85 80 84 70 79 75 Slow Whoop 0.069 0.098 0.028 0.037 0,100 0.142 0.025 0.035 0.050 0.042 90 99 89 75 95 92 Siren 0.080 0.104 0.027 0.036 0.122 0.152 0.021 0.030 0.045 0.041 89 84 89 75 85 82 HMO 0.044 0.057 0.020 0,026 0.089 0.114 0.018 0.026 0.042 0.039 86 81 86 71 82 79 Table 2: Strobe Current Ratings Note; If the strobe and audible operate. on the same circuit. add the strobe current from Table 2 RMS Current (amps) to the audible current from Table 1. Model MT-121575 MT- 241575 MTWP 2475 MT 24MCW " RMS current ratings are per UL average RMS Candela 1575cd 1575cd 1 BOcd 15cd 30cd 75x1 110ed method, UL max current rating is the maximum RMS i 24VDC 0.152 0.060 0.094 0.041 0.063 0.109 0.140 current within the listed voltage range (16 for 24v UL max' 0255 0.090 0.138 0.060 0.092 0.165 0.220 units). For strobes the UL max current is usually at the minimum listed voltage (16v for 24v units). For audibles the max current is usually at the maximum listed voltage (33v for 24v units). For unfiltered FWR ratings. see installation instructions. •