10-10393 - Laserfiche WebLink

Browse Search

Chapter 3 — System Design Page 3 -11 REV. 2 9. Radiant Char - Broiler (864 sq. in. (2195 sq. cm) x 36 in. The 2L nozzle, Part No. 551027, is used for low proxim- (91 cm) longest side maximum) ity lava rock char - broiler protection. This nozzle is a two Two nozzles are available for radiant char - broiler protec- (2) flow nozzle. The nozzle must be located anywhere tion: High proximity and low proximity. on the perimeter of the hazard surface, 15 in. to 24 in. The 2H nozzle, Part No. 551028, is used for high proximity ( to 61 cm) above the cooking surface of the appli- radiant char - broiler protection. This nozzle Is a two (2) flow ante and aimed at the center of the broiler surface. See Figure 3 -12. nozzle. The nozzle must be located above any corner of the hazard surface, 36 in. to 48 in. (91 to 122 cm) above 2L NOZZLE LOCATED ANYWHERE WITHIN THE PERIMETER 2L FOR HIGH PROXIMITY PROTECTION the cooking surface of the appliance and aimed at the ti 2L NOZZLE LOCATED ANYWHERE ON THE PERIMETER center of the broiler surface. See Figure 3 -11a. 2L ` FOR LOW ! PROXIMI EDGE OF 35 IN. \∎1\ PROTECTION 2H i, NOZZLE (ANY HAZARD AREA (80 cm) 2L ' t \ CORNER) 24 I _1 \0 2H \\ (81 cm) `` `1 d 151N. • ‘ d 4B IN. � • \\ 1 I I (30 , cm) \ 1� (122 cm) `\ \ q 111 3G IN. LAV ROCK 006157PC I (91 cm) CHAR - BROILER EDGE OF J I `, HAZARD AREA r Figure 3 -12. HIGH PROXIMITY 0051e6PC RADIANT BROILER 11. Natural Class "A" Charcoal Char - Broiler (480 sq. in. Figure 3 - 11a. (3097 sq. cm) x 24 in. (61 cm) longest side maximum) Note: Class "A" (natural) charbroilers are distinguished The 2L nozzle, Part No. 551027, is used for low proximity radiant char - broiler protection. This nozzle is a two (2) flow logs s he use of charcoal, mesquite chips, chunks, and /or t nozzle. The nozzle must be located anywhere on the logs that are used for cooking. perimeter of the hazard surface, 13 in. to 36 in. (33 to 91 cm) Two nozzles are available for natural charcoal char - above the cooking surface of the appliance and aimed at the broiler protection. High proximity and low proximity. The center of the broiler surface. See Figure 3-11b. maximum depth of fuel (charcoal) must not exceed 6 in. (15 cm). NOZZLE LOCATED ANYWHERE ALONG 2L PERIMETER The 1H nozzle, Part No. 551029, is used for high prox- y OF HAZARD - - imity natural charcoal char - broiler protection. This nozzle ■ is a one (1) flow nozzle. The nozzle must be located 38 IN 2L X I anywhere within the perimeter of the hazard area, 24 (91 cm) — + — In. to 35 In. (61 to 89 cm) above the cooking surface of 131N. the appliance and aimed at the center of the broiler 4 (33 cm) �., surface. See Figure 3 -13. ` r The 1L nozzle, Part No. 551026, is used for low proxim- LOW PROXIMITY 005185PC Ity natural charcoal char - broller protection. This nozzle is RADIANT 'BROILER EDGE OF HAZARD AREA a one (1) flow nozzle. The nozzle must be located Figure 3-11b. anywhere on the perimeter of the hazard surface, 15 in. to 24 In. (38 to 61 cm) above the cooking surface of 10. Lava Rock Char - Broiler (624 sq. in. (4026 sq. cm) x the appliance and aimed at the center of the broiler 26 in. (66 cm) longest side maximum) surface. See Figure 3 -13. Note: Synthetic rock charbroilers are distinguished by 11-1 NOZZLE LOCATED ANYWHERE WITHIN THE 111 PERIMETER FOR HIGH PROXIMITY PROTECTION the use of lava, pumice, or synthetic rocks that are used 14 1L NOZZLE LOCATED ANYWHERE ON THE PERIMETER for cooking. 11_ 1H ' PROXIMITY One nozzle is available for lava rock char - broiler protec- (855 , PROTECTION lion. The 2L nozzle, Part No. 551027, Is used for both 1 1L \ 1 high proximity and low proximity. 241N. . \` — (81 cm1 ` ‘ The 2L nozzle, Part No. 551027, is used for high proximity 15 IN. � 1 lava rock char - broiler protection. This nozzle is a two (2) 1 (3B cm) ��JI 1 flow nozzle. The nozzle must be located anywhere within I FUEL DEPTH MUST N OT the perimeter of the hazard area, 24 in. to 35 in. (61 to 89 EXCEED 5 IN. (15 cm) CHAR BROILER COAL EDGE OFeteiPc cm) above the cooking surface of the appliance and aimed HAZARD AREA at the center of the broiler surface. See Figure 3 -12. Figure 3 - 13. ULEX 3830 PN551274(2) April 1, 2004