10-10491 - Laserfiche WebLink

Browse Search

II I board sheathing with enamel paint on the interior side. All framing, sheathing, and insulation shall terminate 10' -6" AFF. The restroom shall have VCT flooring and 6" high vinyl base on the inside of all walls. The owner shall be responsible for selecting paint, VCT, and vinyl base colors. 14. The restroom shall have a pre -hung, hollow core wood door with a reinforced panel to accept a closer and a solid wood frame. The door shall be 1 -3/4" x 36" x 80 ". The exterior of the door shall be left paint ready. The interior of the door shall receive enamel paint to match the restroom walls. The hardware set shall include 3 hinges, 3 silencers, 1 wall stop, 1 automatic closer, and 1 "Schlage Passage Latch" lockset. The door shall also receive ADA accessible signage as required by code. 15. The restroom accessories shall include 1 toilet paper dispenser, 1 paper towel dispenser, 1 soap dispenser, 1 mirror, and 2 grab bars as required by code. All accessories shall be ADA compliant and shall be stainless steel. The contractor shall be responsible for locating any blocking required for the installation of restroom accessories. 16. The restroom fixtures shall include 1 toilet, 1 sink, and 1 "hi -low" drinking fountain as required for ADA compliance. The contractor shall be responsible for locating any blocking required for the installation of restroom fixtures. 17. The scope includes new 2' x 4' ACT ceilings at 10' -0" AFF in the restroom and in the main room of the space. The ceilings will not have insulation. Structural 18. The scope does not include any work on the foundations, columns, beams, joists, roof deck, or trusses. The scope does not include any work on the structural components of the masonry walls. The scope does not include any structural work to the existing light gauge framing. 19. The scope includes saw - cutting the existing floor slab as needed to provide the new restroom. 20. The scope includes re- pouring any portion of the existing slab that is saw -cut. It also includes pouring a new slab in the area of the existing slab leave out at the rear of space D5 -D6. 21. All new slab pours shall be 4" thick 3,000 psi concrete. The top of all new slab pours shall be flush with the top of the existing slab. Fire Protection 22. The existing building has a fire sprinkler system with the heads turned up. The landlord's tenant build out contractor will turn down the sprinkler heads and reposition them as needed to fit the ceiling layout. The design of the sprinkler system will be handled by the contractor through their shop drawings. The contractor shall be responsible for determining the exact locations of all sprinkler heads and for _ .coordinating_vyith_all diNiplints. The contractor shall be responsible for signed and ___ sealed shop drawings as required for permitting. 23. Cuhaci & Peterson's scope as it relates to the fire sprinkler system shall be limited to schematic review of the contractor's shop drawings. C &P will review the shop drawings as a courtesy for coordination with other disciplines. C &P's scope will not include review of the shop drawings for code compliance or constructability. Plumbing 24. The scope does not include any work to any underground sanitary lines other than what is required for connection of new sanitary lines. The scope does not include any work to any existing clean outs. 25. The scope includes removal of any unused portion of existing above ground stub -ins far space D5 -D6.