Laserfiche WebLink
• <br /> Fastening #5: Minimum Grade 33 Steel Deck Only: OMG #15 Large Head Roofgrip, OMG <br /> XHD screw or JM High Load Fasteners with OMG XHD Barbed Seam Plates <br /> spaced at maximum 6 in. (150 mm) o.c. within the minimum 6 in (150 mm) wide <br /> laps, which are spaced at maximum 114 in. (2895 mm) o.c. and sealed with a <br /> minimum 1.75 in (45 mm) heat weld placed on the outside edge of the lap. <br /> Maximum Design Pressure: -45 psf <br /> Fastening #6: Minimum Grade 80 Steel Deck Only: OMG #15 Large Head Roofgrip, OMG <br /> XHD screw or JM High Load Fasteners with OMG XHD Barbed Seam Plates <br /> spaced at 12 in. (305 mm) o.c. within the minimum 5 in (127 mrn) wide laps, <br /> which are spaced at 70 in (1778 mm) o.c. and sealed with a minimum 2 in (51 <br /> mm) wide heat weld placed on the outside edge of the lap. <br /> Maximum Design Pressure: -45 psf <br /> Fastening #7: Minimum Grade 33 Steel Deck Only: OMG #15 Lage Head Roofgrip with <br /> Polymer Batten Strip. Screws are spaced at maximum 12 in (305 mm) o.c. within <br /> the minimum 4.5 in (114 mm) wide laps, which are spaced at maximum 140.5 in <br /> (3,568 mm) o.c. and sealed with a minimum 1.5 in (40 mm) wide heat weld <br /> placed on the outside edge of the batten strip and a minimum 1.0 in (25 mm) wide <br /> heat weld placed on the inside edge of the batten strip. <br /> Maximum Design Pressure: -45 psf <br /> Fastening #8: Minimum Grade 80 Steel Deck Only: JM High Load Fasteners spaced max 6 <br /> in. (152 min) o.c. through GenFlex Bar Anchors. The bars and fasteners are <br /> placed within the min 4.5 in. (114 mm) wide laps, which are spaced at max 70.25 <br /> in (1784 mm) o.c. and sealed with a min. 0.75 in (19 mm) wide heat weld on the <br /> inside of the lap and a min 1 in. (25 mrn) wide heat weld on the outside of the lap. <br /> Maximum Design Pressure: -75 psf <br /> Fastening #9: Minimum Grade 80 Steel Deck Only: JM High Load Fasteners spaced max 12 <br /> in. (305 mm) o.c. through GenFlex Bar Anchor. The bars and fasteners are placed <br /> within the min 4.5 in. (114 mm) wide laps, which are spaced at max 70.25 in <br /> (1784 mm) o.c. and sealed with a min. 0.75 in (19 mm) wide heat weld on the <br /> inside of the lap and a min 1 in. (25 mm) wide heat weld on the outside of the lap. <br /> Maximum Design Pressure: -52.5 psf. <br /> Fastening #10: Minimum Grade 80 Steel Deck Only: JM High Load Fasteners spaced max 6 <br /> in. (152 mm) o.c. through GenFlex Bar Anchors. The bars and fasteners are <br /> placed within the min. 4.5 in. (114 mm) wide laps, which are spaced at max 142.5 <br /> in. (3620 mm) o.c. and sealed with a min.1 in. (25 mm) wide heat weld on the <br /> inside of the lap and a min 1 in. (25 mm) wide heat weld on the outside of the lap. <br /> Maximum Design Pressure: -52.5 psf. <br /> Fastening #11: Minimum Grade 80 Steel Deck Only: OMG #15 Large Head Roofgrip with <br /> Polymer Batten Strip. Screws are spaced at maximum 6 in (152 mm) o.c. within <br /> the minimum 5 in (127 mm) wide laps, which are spaced at maximum 144 in <br /> (3658 mm) o.c. and sealed with a minimum 1.5 in (40 mm) wide heat weld placed <br /> on the outside edge of the batten strip. <br /> Maximum Design Pressure: -52.5 psf. <br /> NOA No.: 07- 0517.06 <br /> `\_ ` ''� <br /> Expiration Date: 07/17/12 <br /> J y\ Approval Date: 07/12/07 <br /> Page 21 of 30 <br />