Laserfiche WebLink
This permit application is to accomplish the following: <br /> • Wrap exhaust duct with zero clearance fire wrap (specs attached). <br /> • Furnish and install a 16 ga. top pan to be welded to duct with continuous liquid tight <br /> weld and seal roof curb to duct to route accumulated grease back down to the hood. <br /> • Repair misaligned hinges on exhaust blower. <br /> • Clean and repair grease catch pan on blower. <br /> Also, to be accomplished by others: <br /> • Clean all grease from exhaust duct inside and outside. <br /> • Clean grease accumulation from surrounding area including top of hood, wall and <br /> roof trusses. <br /> • Remove and replace ceiling where grease contamination has occurred. <br />