09-9335 - Laserfiche WebLink

Browse Search

SYSTEM SPECIFICATIONS SYSTEM CAPACITY 16.65" (42.29 cm.) wide x 5.20" (13.34 cm.) deep. Trim Ring • Intelligent Signalling Line Circuits 1 (TR -CEB): 22.00" (55.88 cm.) high x 19.65" (49.91 cm.) wide. • Addressable device capacity 198 SHIPPING SPECIFICATIONS • Programmable software zones 99 • Annunciators 32 Weight: 26.9 lbs. (12.20 kg.) Dimensions: 20.00" (50.80 cm.) high x 22.5" (57.15 cm.) wide x 8.5" (21.59 cm.) deep. ELECTRICAL SPECIFICATIONS TEMPERATURE AND HUMIDITY AC Power: FireWarden - 100 -2: 120 VAC, 60 Hz, 3.0 amps. RANGES FireWarden- 100 -2(E): 240 VAC, 50 Hz, 1.5 amps. Wire size: minimum 14 AWG (2.00 mm with 600 V insulation. This system meets NFPA requirements for operation at 0 -49° Battery: Two 12 V 18AH lead -acid batteries. Battery charger C/32 -120° F and at a relative humidity 93% ± 2% RH (noncon- capacity: 7 — 18 AH. FireWarden -100 -2 cabinet holds maxi- densing) at 32°C ± 2 °C (90 °F ± 3 °F). However, the useful life mum of two 18 AH batteries. of the system's standby batteries and the electronic compo- Communication Loop: Supervised and power- limited. nents may be adversely affected by extreme temperature Notification Appliance Circuits: Each terminal block pro- ranges and humidity. Therefore, it is recommended that this vides connections for two Style Y (Class B) or one Style Z system and its peripherals be installed in an environment with (Class A) for a total of four Style Y (Class B) or two Style Z a normal room temperature of 15 -27° C /60 -80° F. (Class A) NACs. Maximum signaling current per circuit: 2.5 amps. End -of -Line Resistor: 4.7K ohm, 1/2 watt (P /N 71252 NFPA STANDARDS UL listed) for Style Y (Class B) NAC. Refer to Notifier Device Compatibility Document for listed compatible devices. The FireWarden -100 -2 complies with the following NFPA 72 Two Programmable Relays and One Fixed Trouble Relay: Fire Alarm Systems requirements: Contact rating: 2.0 amps © 30 VDC (resistive), 0.5 amps © 30 — LOCAL (Automatic, Manual, Waterflow and Sprinkler VAC (resistive). Form -C relays. Supervisory). Special Application Power (24 VDC Nominal): Jumper — AUXILIARY (Automatic, Manual and Waterflow) (requires selectable (JP4) for conversion to resettable power output. Up 4XTMF). to 0.5 amps total DC current available from each output. — REMOTE STATION (Automatic, Manual and Waterflow) Power - limited. (requires 4XTMF). Four -Wire Resettable Special Application Smoke Detector — PROPRIETARY (Automatic, Manual and Waterflow). Power (24 VDC nominal): Up to 0.5 amps for powering four- — CENTRAL STATION (Automatic, Manual and Waterflow, wire smoke detectors. Power - limited. Refer to Notifier Device and Sprinkler Supervised). Compatibility Document for listed compatible devices. — AUTO DETECTOR SELF TEST Remote Sync Output: Remote power supply synchronization output. Nominal special application power: 24 VDC. Maximum AGENCY LISTINGS AND APPROVALS current: 40 mA. End -of -Line Resistor: 4.7K ohm. Output linked to NAC 1 control. Supervised and power - limited. The listings and approvals below apply to the basic FireWar- Telephone Interface: Requires dedicated business tele- den -100 -2 control panel. In some cases, certain modules may phone number with a minimum of 7 volts DC. Obtain dedicated not be listed by certain approval agencies, or listing may be in phone line directly from your local phone company. Do not use process. Consult factory for latest listing status. shared phone lines or PBX (digital) type phone line extensions. • UL: S624 CABINET SPECIFICATIONS Door: 19.26" (48.92 cm.) high x 16.82" (42.73 cm.) wide x 0.12" (.30 cm.) deep. Backbox: 19.00" (48.26 cm.) high x Microsoft® and Windows® are registered trademarks of the Microsoft Corpo- ration. 02006 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. ISO 9001 This document is not intended to be used for installation purposes. We try to keep our product information up -to -date and accurate. ;: •••■••• '' E R T I F I E D We cannot cover all specific applications or anticipate all requirements. ENIMEMIM 6IMMIMMEYNi All specifications are subject to change without notice. IUALITY SYSTEMS Made in the U.S. A. For more information, contact Notifier. Phone: (203) 484 -7161, FAX: (203) 484 -7118. www.notifier.com Page 4 of 4 — DN -7101 • 06/02/06