Laserfiche WebLink
Maximum IDC Voltage: 11 Volts. <br /> Maximum IDC Current: 240 pA <br /> EOL resistance: 47K ohms. <br /> Maximum SLC Wiring resistance: 40 Ohms. <br /> Temperature range: 32° to 120 °F (0° to 49 °C). <br /> Humidity range: 10% to 93% (non- condensing). <br /> Dimensions: 4.5° (11.43 cm) high x 4" (10.16 cm) wide x <br /> 2.125" (5.398 cm) deep. <br /> NDM- 100(A) AUTOMATIC ADDRESSING <br /> The NDM- 100(A) automatically assigns itself to two address- <br /> able points, starting with the original address. For example, if <br /> the NDM- 100(A) is set to address "26 ", then it will automati- <br /> cally assign itself to addresses "26" and "27 ". <br /> NOTE: "Ones" addresses on the NDM- 100(A) are 0, 2, 4, 6, or 8 <br /> only. Terminals 6 and 7 use the first address, and terminals 8 and <br /> 9 use the second address. <br /> CAUTION: <br /> Avoid duplicating addresses on the system. <br /> Installation <br /> NMM- 100(A), NZM- 100(A), and NDM- 100(A) modules mount <br /> directly to a standard 4" (10.16 cm) square, 2.125" (5.398 cm) <br /> deep, electrical box. They may also be mounted to the <br /> SMB500 surface -mount box. Mounting hardware and installa- <br /> tion instructions are provided with each module. All wiring <br /> must conform to applicable local codes, ordinances, and regu- <br /> lations. These modules are intended for power - limited wiring <br /> only. <br /> The NMM- 100P(A) module is intended to be wired and <br /> mounted without rigid connections inside a standard electrical <br /> box. All wiring must conform to applicable local codes, ordi- <br /> nances, and regulations. <br /> Agency Listings and Approvals <br /> In some cases, certain modules may not be listed by certain <br /> approval agencies, or listing may be in process. Consult fac- <br /> tory for latest listing status. <br /> • UL: S635 <br /> • ULC: S635 <br /> • FM Approved <br /> • CSFM: 7300 - 0028:230 (NMM -100, NMM -100P, NZM -100); <br /> 7300 - 0028:237 (NDM -100) <br /> • MEA: 72 -01 -E Vol. 2 (NMM -100, NMM -100P, NZM -100); <br /> 227 -03 -E Vol. 3 (NDM -100) <br /> Product Line Information <br /> NOTE: "A" or suffix indicates ULC- listed model. <br /> NMM- 100(A): Monitor module. <br /> NMM- 100P(A): Monitor module, miniature. <br /> NZM- 100(A): Monitor module, two -wire detectors. <br /> NDM- 100(A): Monitor module, dual, two independent Class B <br /> circuits. <br /> SMB500: Optional surface -mount backbox. <br /> NOTE: See installation instructions and refer to the SLC Wiring <br /> Manual, PN 52304. <br /> dn- 6999:b1 • 11/19/09 — Page 3 of 4 <br />