10-10544 - Laserfiche WebLink

Browse Search

SPEC. DESCRIPTION OF WORK LOCATION COST 19 FLOOR COVERING / CARPET The carpet shall be (30) ounce, stain resistant over a minimum • of inch rebond, FHA approved. The installation shall be in an approved manner. All tack strips, metal accessories, etc., are included in this specification. The carpet shall be first quality and with no seconds will be accepted. Product approval documentation will be provided by the contractor prior to installation. All rooms to be carpeted identically with the exception of the Kitchen, Baths, interior Washer/Dryer area. Entire House 1,630 22 FLOOR COVERING / CERAMIC Install new ceramic tile floor. Assume cost of tile to be installed Kitchen 2,832 at $2.00 per sq. foot of area. Color to be selected by the owner. All Bathrooms Laundry Room Foyer 25 BASE & SHOE MOLDING Install new wood base and shoe molding on all walls in newly floored areas. When new base is installed over flooring, no shoe is required. All carpeted walls does not require shoe molding. All base and shoe to be primed on the back before installing. (Colonial style) Entire House 1,932 26/27 WALL FRAMING SPECIFICATIONS -NEW STUD WALLS Build new interior walls as shown on the plan and specified in the 2010 Bid specs. Furr exterior walls with 1X2 pressure treated over the insulation board @ 16" O.C. New interior walls to be 2x4 @ 16" on center. See Plan 5,166 29 ROOF FRAMING- GENERAL SPECIFICATIONS Roof framing and sheathing, as submitted and stamped by a licensed engineer, if trusses are used, installed as shown on the plan. All roof framing tied to walls with hurricane clips per SBC or IBC as called out on the floor plan. All sheathing to be 1/2" 4 ply CDX plywood. Entire House 9,244 31 ATTIC VENTILATION Furnish and install ridge vents at all peaks. Exterior 371 PAGE TOTAL 21,175 CUM TOTAL 40,560 DATE: 05/13/10 Keystone Challenge Fund- Case # 09 -804 PAGE: 2