11-11786 - Laserfiche WebLink

Browse Search

DN-7001:C1 •Ai-380 NOT-BG 12LX ('� N 4T 1 F 1 E R Addressable Manual Pull Station � For FireWarden Series Panels by Honeywell . General x��:�� The Notifier NOT-BG12LX is a state-of-the-art, dual-action i �� (i.e., requires two motions to activate the station) pull station that includes an addressable interface for FireWarden series ~� intelligent control panels, and the NSP-25 panel. Because the NOT-BG12LX is addressable, the control panel can display the exact location of the activated manual station. This leads fire i personnel quickly to the location of the alarm. i ,� Features � � � A • Maintenance personnel can open station for inspection and address setting without causing an alarm condition. � • Built-in bicolor LED, which is visible through the handle of � the station, flashes in normal operation and latches steady red when in alarm. • Handle latches in down position and the word "ACTIVATED" appears to clearly indicate the station has been operated. $ • Captive screw terminals wire-ready for easy connection to � SLC loop (accepts up to 12 AWG/3.25 mm wire). • Can be surface mounted (with SB-10 or SB-I/O) or semi- flush mounted. Semi-flush mount to a standard single- gang, double-gang, or 4" (10.16 cm) square electrical box. • Smooth dual design. The NOT • Meets ADAAG controls and operating mechanisms guide- Add�BS38bl@ Ma1fU81 PUII StatiOn lines (Section 4.1.3[13]); meets ADA requirement for 5 Ib. maximum activation force. • Highly visible. The BG12TR is usually needed tor semi-flush mounting with 4' • Attractive shape and textured finish. (10.16 cm) or double-gang boxes (not with single-gang boxes). • Key reset. O peration • Includes Braille text on station handle. • Optional trim ring (BG12TR). Pushing in, then pulling down on the handle causes it to latch in the down/activated position. Once latched, the word "ACTI- • Meets UL 38, Standard for Manually Actuated Signaling VATED" (in bright yeilow) appears at the top of the handle, Boxes. while a portion of the handle protrudes from the bottom of the station. To reset the station, simply unlock the station with the Construction key and pull the door open. This action resets the handle; clos- Shell, door, and handle are molded of durabie polycarbonate ing the door automaticaliy resets the switch. material with a textured finish. Each manual station, on command from the control panel, sends data to the panel representing the state of the manual Specifications switch. Two rotary decimal switches allow address settings (1 — 99 on NFW2-100/NFW2-100C, 1— 50 for NFVN-50/NFW- • Shipping Weight: 9.6 oz. (272.15 g) 50C). • Normal operating voltage: 24 VDC. • Maximum SLC loop voltage 2s.o voc. Architectural/Engineering • Maximum SLC loop current: �A. S pecifications • Temperature Range: 32°F to 120°F (0°C to 49°C) Manual Fire Alarm Stations shall be non-coded, with a key- • Relative Humidity: 10% to 93% (noncondensing) operated reset lock in order that they may be tested, and so • For use indoors in a dry locatton designed that after actual Emergency Operation, they cannot be restored to normal except by use of a key. An operated sta- Installation tion shall automatically condition itself so as to be visually detected as activated. Manual stations shall be constructed of The NOT-BG12LX will mount semi-flush into a single-gang, red-colored polycarbonate material with clearly visible operat- double-gang, or standard 4' (10.16 cm) square electricai outlet �ng instructions provided on the cover. The word FIRE shall box, or will surtace mount to the model SB-10 or SB-I/O sur- appear on the front of the stations in white letters, 1.00 inches face backbox. If the NOT-BG12LX is being semi-flush �2•54 cm) or larger. Stations shali be suitable for surface mounted, then the optional trim ring (BG12TR) may be used. mounting on matching backbox SB-10 or SB-I/O; or semi-flush mounting on a standard single-gang, double-gang, or 4' (10.16 cm) square electrical box, and shall be installed within DN-7001:C1 • 8/i 6/10 — Page 1 of 2 P. 5