12-12735 - Laserfiche WebLink

Browse Search

Detector Sensitivity Test NP-100RA:Same as NP-100R with ULC Listing for use with a DNRA duct detector housing;6210LPA base included. Each detector can have its sensitivity tested (required per NFPA 72,Chapter 14 on Inspection, Testing and Maintenance) lNTELLIGENT BASES when installed/connected to a FireWarden-100-2 or FireWar- NOTE:A"suffix indicates ULC Listed model. den-50 addressable fire alarm control panel.The results of the sensitivity test can be printed off the FireWarden-100-2 or Fire- NOTE:For details about intelligent bases and their mounting,see Warden-50 for record keeping. DN-60054. B210LP(A): Plug-in detector base (included); standard U.S. Specification flanged low-profile mounting base. � Voltage range: 15—32 VDC(peak). B210LPBP:Bulk pack of 6210LP;package contains 10. Standby current:300 uA�24 VDC. 8501(A):Standard European flangeless mounting base. LED current:6.5 mA�24 VDC(latched"ON"). B501BP: Bulk pack of 6501;package contains 10 Air velocity:4,000 ft./min.(20 m/sec.)maximum. B200SR(A): Intelligent sounder base capable of producing sound output with ANSI Temporal 3 or continuous tone. Size:2.1"(5.33 cm)high;base determines diameter Replaces 6501 BH series bases in retrofit applications. —B210LP(A):6.1'(15.5 cm)diameter. 6224RB(A): Plug-in System Sensor relay base. Screw termi- —B501(A):4 1"(10.4 cm)diameter. nals:up to 14 AWG(2.0 mmz).Relay type:Form-C.Rating:2.0 —B200SR(A):6.875"(17.46 cm)diameter. A � 30 VDC resistive; 0.3 A � 110 VDC inductive; 1.0 A � —B224RB(A):6.2"(15.748 cm)diameter 30 VDC inductive. Weight:3.6 oz.(102 g). 822461(A): Plug-in System Sensor isolator detector base. Maximum 25 devices between isolator bases (see DN-6994). Operating temperature range: for NP-100(A):0°C to 49°C ACCESSORIES (32°F to 120°F);for NP-JOOT(A):0°C to 38°C(32°F to 100°F). NP-i00R(A):installed in a DNR(A)/DNRW-20°C to 70°C(-4°F F110: Retrofit flange to convert B210LP(A) to match the to 158°F). 6710LP(A) profile, or to convert older high-profile bases to Temperature:0°C—49°C(32°F—120°F). low-profile. Relative humidity: 10%—93%,non-condensing. F110BP:Bulk pack of F110;package contains 15 F210: Replacement flange for 6210LP(A)base. Listings RA100Z(A): Remote LED annunciator.3—32 VDC.Mounts to Listings and approvals below apply to the NP-100(A), NP- a U.S. single-gang electrical box. For use with 6501(A) and 100T(A), and NP-100R(A) detectors. In some cases, certain B210LP(A)bases only. modules may not be listed by certain approval agencies, or SM6600:Surface mounting kit tusing may be in process. Consult factory for latest listing sta- M02-04-OO:Test magnet. • UL Listed:S1115. M02-09-00:Test magnet with telescoping handle. • ULC Listed:S911 XR2B: Detector removal tool. Allows installation and/or CSFM:7272-0028:0231 removal of detector heads from bases in high ceiling applica- � tions. • MEA:243-02-E Vol.2. XP-4: Extension pole for XR2B. Comes in three 5-foot(1.524 • Maryland State Fire Marshal•permit 2173. m)sections. • FM approved. T55-127-010: Detector removal tool without pole. Product Line Information BCK-200B:Black detector covers for use with NP-100(A)only; box of 10. NOTE:A°suffix indicates ULC Listed modeL WCK-200B: White detector covers for use with NP-100(A) NP-100: Adressable photoelectric detector; 6210LP base only;box of 10. included. NP-100A:Sames as NP-100 with ULC Listing; B210LPA base included. NP-100T: Same as NP-100 but with therma/ element; 6210LP base included. NP-100TA: Same as NP-100T with ULC Listing; B210LPA base included. NP-100R: Remote teSt capable addressable photoelectric NOTIFIER� and FireWarden� are registered trademarks of Honeyweil detector for use with a DNRA/DNRW duct detector housing; �ntemational Inc. B210LP base InCluded. �2011 All rights reserved. Unauthorized use of this document is stricUy prohibited. '�O �oo� This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover ail specific applications or anticipate all requirements. e��i�ai�rc a Manr�cnn��s AII specifications are subject to change without notice. QUALITY SISTEINS MadeintheU.S.A. For more information,contact Notifier Phone:(203)484-7161,FAX.(203)484-7118. www.notifier.com Page 2 of 2—DN-6995:C•12/07/2011