12-12801 - Laserfiche WebLink

Browse Search

Signais Silenced (yellow) illuminates if notification appli- pass network control to alternate network control centers.This ances have been silenced. It flashes if some,but not all,of the protocol allows for a "request for control" from another net- NACs have been silenced. worked panel,which will be accepted vr rejected trom the cur- Point Disabled (yellow)illuminates when at least one device rent DCC. A 15-second time-out allowance provides for an - has been disabled. It will flash until all disabied points have automatic passing of control in the event there is no response been acknowledged. from the original DCC. If the NFS-3030/NFS2-3030 panel associated with an LCD-160 has been programmed to partici- Controls Active (green) illuminates when the LCD-160 pate in DCC, all remote displays with Local Control ON will assumes control of the node as a primary display. automatically participate. DIAGNOSTIC LED INDICATORS pgency Listings and Approvals Status, LED11 (green), blinks when the LCD-160 is on. Visi- ble to the installer/troubleshooter only. These listings and approvals apply to the LCD-160. In some Receive, LED12 (green), blinks when data is received from cases, certain modules or applications may not be listed by the panel.Visible to the installer/troubleshooter only. certain approval agencies, or listing may be in process. Con- sult factory for latest listing status. Transmit, LED13 (green), blinks when data is transmitted to . UL:S635 the panel.Visible to the installer/troubleshooter only. • ULC:CS100 Microfail, LED14 (yellow), illuminates if the microcontroller fails.Visible to the installedtroubleshooter only. • MEA:8-04-E(annunciator only) • CSFM:7120-0028:227 Event Handling and the Display and • FM:Approved Control Center Product Line Information UL and ULC require that when multiple command and control LCD:�'160: 640-character Liquid Crystal Display annunciator centers are installed,only one operator at any location can be in controi at any given time for functions such as acknowledge, Backboxes silence,and reset. NOTIFIER calis this the Display and Con- trol Center (DCC). DCC operation provides a mechanism to The following backbozes can be surface- or semi-flush- mounted to provide an enclosure for remote mounting. Use with 1/2"(1.27 cm)conduit in the provided knockouts. RDP Bus Wire Runs ABS-2D(black)and ABS-2DR(red): surface- or semi-flush enclosure for remote mounting.Mounts an LCD-160 directly to FACP LCD-160 Power the enclosure's hinged dress plate. The ABS-2D and ABS- 12 to 18 AWG 2DR do NOT support the installation of the AKS-1 key-switch (3.1 to 0.78 mmZ) LCD-160 or APJ-1 phone jack. Not for use in Canadian applications. �„�,f-',;�;;,;; non-resettable Optional trim ring TR-ABS2D for semi-flush mounting.Dimen- ��,�.,; _ sfons, box: 12.0" (30.480 cm) H x �2.0" (30.480 cm) W x ";�;z��t;, ,,, ,,,,. . 3.797" (9.644 cm) D (NOTE: The biack ABS-2D is sfghtly � a��s;��_`=k Two-wire RDP Bus � - � - - deeper). Dlmensions, door: 12.0" (30.480 cm) H x 12.0" 4000 feet(1219.2 m)max. • ' ' ' ' (30.480 cm)W x 1.250"(3.175 cm)D. power-limited and supervised ABS-4D(black)and ABS-4DR(red): surtace- or semi-flush enclosure for remote mounting. Mounks an LCD-160 and two annunciators directly to the enclosure's hinged dress plate. The ABS-4D and ABS-4DR do NOT support the installation of Sample Screen: Point Event Display ACKNOWLEDGED TROUBLE ELEVATOR LOBBY EAST WING FIFTH FLOOR Z239 SMOKE (PHOTO) 11:58:45A WED JUN 26, 2003 L03D002 EVENT COUNTS FIRE ALARMS:000 PREALARM:000 TROUBLE:�01 SUPERVISORY:D00 SECURITY:000 DISABLE:000 � 11:58�46A WED JUN 26, 2003 � �' TIGNAL 3ILENCE , � D' MORE INFORMATION SYSTEM RESET ' � �' PROGRAM MENU , � DN-694p:A•12/01/06—Page 3 of 4