|
DN-7087:81
<br /> � SpectrAlert� Advance N OT 1 F 1 E R°
<br /> Selectable Output ��
<br /> - Notification Appliances by Honeywell
<br /> . -
<br /> General
<br /> System Sensor� SpectrAleri� Advance selectabie-output �-�
<br /> horns,strobes and hornlstrobes are rich with features guaran- " °'=��. . $ $
<br /> teed to cut installation times and maximize profits.The Spec- �'-� �,;€�,� � a
<br /> trAlert Advance series of notification appliances is designed to � �`�
<br /> simplify your installations, with features such as: plug-in `�' "
<br /> designs,instant feedback messages to ensure correct installa- Indoor Ceiling Outdoor Ceiling
<br /> tion of individual devices, and eleven field-selectable candela Horn/Strobe Strobe
<br /> settings for wall and ceiling strobes and horn/strobes.
<br /> More specifically, when installing Advance products, first °� J �{
<br /> .�
<br /> attach a universal mounting plate to a four-inch square, four- $
<br /> inch octagon, or double-gang junction box. The two-wire � '
<br /> mounting plate attaches to a single-gang junction box. ' � �
<br /> Then, connect the notification appliance circuit wiring to the �;�..;�:v ;:�;��°° ^
<br /> SEMS terminals on the mounting plate. Indoor Wail Indoor Ceiling
<br /> Finally,attach the horn,strobe,or horn/strobe to the mounting Horn/Strobe Strobe
<br /> plate by inserting the producYs tabs in the mounting plate's ,;�
<br /> grooves. The device will rotate into position, locking the prod- `�'° �' � �,�
<br /> ucYs pins into the mounting plate's terminals. The device will ��'':.. '
<br /> temporarily hold in place with a catch until it is secured with a °�---"<� � g ,�g
<br /> captured mounting screw. `"" "
<br /> '`a'�x -.�fi fi
<br /> SpectrAlert Advance products allow you to choose:
<br /> • 12 or 24 volts. Indoor Wall n Outdoor Wall r
<br /> • At 24 volts, 15, 15/75,30,75, 95, 110, 115, 135, 150, 177, Hom Strobe
<br /> or 185 candela by way of a rear-mounted slide switch and • Outdoor products rated from�0°F and 151°F(-40°C and
<br /> front viewing window. . 66°C).
<br /> • Horn tones and volume by way of a rotary switch. • Outdoor products rainproof per UL50 (NEMA 3R) and
<br /> • The SpectrAlert Advance series includes outdoor notifica- weatherproof per NEMA 4X, IP56
<br /> tion appliances. Outdoor strobes and horn/strobes (two- • Minimal intrusion into the backbox.
<br /> wire and four-wire)are availabie for wall or ceiiing.Outdoor • Horn rated at 88+dbA at i 6 volts.
<br /> horns are available for wall only.All System Sensor outdoor . Rotary switch for tone selection,.
<br /> products are rated between-40°F and 151°F (-40°C and
<br /> 66°C)in wet or dry applications. • Three horn volume settings.
<br /> Models available: • Electrically compatible with existing SpectrAlert products.
<br /> • Indoor wall-mount: horn, strobe, 2-wire horNstrobe, 4-wire Engineering Specifications
<br /> horn/strobe.
<br /> • �ndoor ceiling-mount: strobe, 2-wire horn/strobe, 4-wire SpectrAlert Advance horns, strobes, and horn/strobes shall
<br /> horn/strobe. mount to a standard 4 0" x 4.0' x 1.5" (10.16 x 10.16 x 3.81
<br /> Outdoor wall-mount: horn, strobe, 2-wire horn/strobe, 4- cm)backbox,4.0'(10 16 cm)octagonal backbox,or a double-
<br /> • wire horn/strobe. gang backbox.Two-wire products shall also mount to a single-
<br /> gang 2.0"x 4.0"x 1.875"(5.08 x 10.16 x 4 763 cm)backbox.A
<br /> • Outdoor ceiling-mount: strobe, 2-wire horn/strobe, 4-wire universal mounting plate shall be used for mounting ceiling
<br /> horn/strobe. and wall products. The notification appliance circuit wiring
<br /> shall terminate at the universai mounGng plate. Also, Spec-
<br /> Features trAlert Advance products, when used with the SynaCircuitT"'
<br /> • Plug-in design. Module accessory, shall be powered from a non-coded notifi-
<br /> cation appliance circuit output and shalf operate on a nominal
<br /> • Same mounting plate for wall-and ceiling-mount units. 12 or 24 volts. When used with the Sync•Circuit Module, 12-
<br /> • Shorting spring on mounting plate for continuity check volt rated notification appliance circuit outputs shall operate
<br /> before installation. between 9 and 17.5 volts; 24-volt rated notification appliance
<br /> • Captive mounting screw. circuit outputs shall operate between 17 and 33 volts. Indoor
<br /> SpectrAlert Advance products shall operate between 32°F and
<br /> • Tamper-resistance capability. 120°F(0°C and 49°C)from a regulated DC,or full-wave-recti-
<br /> • Field-selectable candela settings on wall and ceiling units: fied, unfiltered power supply. Strobes and horn/strobes shall
<br /> 15, 15/75,30,75,95, 110, 115, 135, 150, 177, 185. have field-selectable candela settings including 15, 15/75, 30,
<br /> • Automatic selection of 12 or 24 volt operation at 15 and 15/ 75,95, 110,115, 135, 150,177, 185.
<br /> 75 candela.
<br /> • Outdoor wall and ceiling products.
<br /> DN-7087:B1•09/27/2010-Page 1 of 4
<br />
|