Laserfiche WebLink
Maxtmum NAC Line Loss: 4 VDC. COntact Ratings for FRM-1(A) <br /> External supply voltage(between Terminals T10 and Current Maximum Load <br /> T11): Maximum (NAC): Regulated 24 VDC; Maximum Rating Voltage Description Application <br /> (Speakers):70.7 V RMS,50W. <br /> Drain on external supply: 1.7 mA maximum using 24 VDC 3 A 30 VDC Resistive Non-Coded <br /> supply;2.2 mA Maximum using 80 VRMS supply. 2 A 30 VDC Resistive Coded <br /> Max NAC Current Ratings: For class B wiring system, the 9 A 110 VDC Resistive Non-Coded <br /> current rating is 3A;For class A wiring system,the current rat- <br /> ing is 2A. .9 A 125 VDC Resistive Non-Coded <br /> Temperature range: 32°F to 120°F(0°C to 49°C). .5 A 30 VDC �nductive Coded <br /> Humidity range: 10%to 93%non-condensing. (UR=5ms) <br /> 1 A 30 VDC �nductive Coded <br /> Dimensions: 4.5" (114.3 mm) high x 4" (101.6 mm) wide x (UR=2ms) <br /> 1.25" (31.75 mm) deep. Mounts to a 4' (101.6 mm) square x <br /> 2.125°(53.975 mm)deep box. .3 A 125 VAC �nductive Non-Coded <br /> (PF=0.35) <br /> Accessories: SMB500 Electrical Box;C6500 Barrier <br /> Inductive <br /> Specifications for FRM-i(A) 1•5 A zs vac (PF=0.35) Non-Coded <br /> Normal operating voltage: 15 to 32 VDC. Inductive <br /> Maximum current draw: 6.5 mA(LED on). 7 A 70.7 VAC (PF=0.35) Non-Coded <br /> Average operating current: 230 NA direct poll;255 NA group <br /> poll. Inductive <br /> 2 A 25 VAC (PF=0.35) Non-Coded <br /> EOL resistance: not used. <br /> Temperature range: 32°F to 120°F(0°C to 49°C). NOTE:Maximum(Speakers):70.7 V RMS,50 W <br /> Humidity range: 10%to 93%non-condensing. <br /> Dimensions: 4.5" (114.3 mm) high x 4" (101.6 mm) wide x Product Line Information <br /> 1.25" (31.75 mm)deep. Mounts to a 4" (101 6 mm) square x NOTE:°A"suffix indicates ULC Listed model. <br /> 2.125"(53.975 mm)deep box. FCM-1(A): Intelligent Addressable Control Module. <br /> Accessories: SM6500 Electrical Box;C6500 Barrier <br /> °FRM=]`,(A): Intelligent Addressable Relay Module. <br /> Agency Listings and Approvals A2143-20: Capacitor, required for Class A(Style Z)operation <br /> of speakers. <br /> �n some cases, certain modules may not be listed by certain <br /> approval agencies, or Iisting may be in process. Consult fac- SMB500: Optional Surtace-Mount Backbox. <br /> tory for latest listing status. CB500: Control Module Barrier—required by UL for separat- <br /> • UL:S635 ing power-limited and non-power limited wiring in the same <br /> • ULC:S3705(A version only) junction box as FCM-1(A). � <br /> • FM Approved NOTE:For insiallation instructions,see the following documents: <br /> • CSFM:7300-0028:0219 • FCM-1(A)lnstallation document/56-1 i69. <br /> • MEA: 14-00-E • FRM-1(A)Insiallation document/56-3502. <br /> • FDNY:COA#6067,#6065 • Notifier SLC Wirrng Manual,document 51253. <br /> Notifier� and FlashScan� are registered Vademarks of Honeywell <br /> Internatlonal Inc. <br /> �2011 by Honeywell Intematlonal Inc.Ail rights reserved.Unauthorized use <br /> of this document is strictly prohibited. <br /> '�O 9001 This document is not intended to be used for installation purposes. <br /> We try to keep our product information up-to-date and accurate. <br /> We cannot cover all specific applications or anticipate all requirements. <br /> �p��`���n� All specifications are subject to change without notice. <br /> @UALIiT SYSTEMS MadeinmeU.S.A. <br /> For more information,contact Notifier.Phone:(203)484-7161,FAX.(203)484-7118. <br /> www.notifier.com <br /> Page 2 of 2—DN-6724:B3•2/17/2011 <br />