12-13001 - Laserfiche WebLink

Browse Search

• Minimum Battery Size:7 AH. MS-10UD-7E: Same as above with 240 VAC FLPS-7 Initiating Device Circuits —TB4 (and TB 6 on MS-10UD-7 IpDACT, IPDACT2/2UD Internet Monitoring Module: o��Y)� Mounts in bottom of enclosure with optional mounting kit (PN • Alarm Zones 1 -5 on TB 4(MS-5UD-3 and MS-10UD-7). IPBRKT) Connects to primary and secondary DACT tele- ' ' Alarm Zones 6- 10 on TB6(MS-10UD-7 only) phone output ports for internet communications over customer � provided ethernet internet connection. Requires compatible • Supervised and power-limited circuitry. Teldat Visoralarm Central Station Receiver Can use DHCP or • Operation:All zones Style B(Class B) static IP (See data sheet DF-60407 for more information.) • Normal Operating Voltage: Nominal 20 VDC IPBRKT: Mounting kit for IPDACT in common enclosure • Alarm Current: 15 mA minimum. IPSPLT: Y Adaptor option to allow connection of both panel • Short Circuit Current:40 mA max. dialer outputs to one cable input to IPDACT(sold separately) • Maximum Loop Resistance 100 ohms. OPTIONAL MODULES • End-of-Line Resistor• 4 7K ohm, 1/2 watt (P/N 71252 UL- CAC-5X:Optional(Class A)Converter Module.Converts Style listed) B (Class B) Initiating Device Circuits xo Style D (Class A); and • Standby Current:2 mA. Style Y (Class B) Notification Appliance Circuits to Style Z Refer to the Fire•Lite Device Compatibility Documentfor listed (Class A) Connects to J2 on the MS-5UD-3 and MS-10UD- compatible devices. 7(E)main circuit board and to J7 on the MS-10UD-7(E). Notification Appliance Circuits — TB5 (and TB 7 on MS- NOTE: Two C/ass A Converter Modules are required for the ten- 10UD-7 only): zone panel. • Four NACs 4XTMF: Transmitter module. Provides a supervised output for • Operation• Sryle Y(Class B) local energy municipal box transmitter and alarm and trouble reverse polarity. Includes a disable switch and disable trouble • Special Application power LED A module jumper option allows the reverse polarity circuit • Supervised and power-limited circuitry to open with a system trouble condition if no alarm conditions • Normal Operating Voltage Nominal 24 VDC exists. Mounts to the main circuit board connectors J4 and J5 • Maximum Signaling Current: 3.0 A for MS-5UD-3, 2.5 A COMPATIBLEANNUNCIATORS maximum per NAC; 7 0 A for MS-10UD-7(E), 3.0 A maxi- mum per NAC ANN-80: Remote LCD Annunciator Mimics the information • End-of-Line Resistor:4 7K ohm, 1/2 watt(Part#71252) displayed on the FACP's LCD Red. (For white, order• ANN- 80-W) • Max.Wiring Voltage Drop•2 VDC ANN-LED: LED Annunciator with three LEDs for each zone: Refer to the Fire•Lite Device Compatibility Documentfor com- Alarm, Trouble, and Supervisory. Mounts in the DP-51050(B) patible listed devices. dress panel. Red. (For white,order ANN-LED-W.) Form C Relays—TB8: ANN-RLED: LED Annunciator with three alarm (red) indica- • Relay 1 (factory default programmed as Alarm Relay) tors for up to 30 input zones or addressable points. (Red. For • Relay 2 (factory default programmed as fail-safe Trouble white,order ANN-LED-W.)(See DF-60241) Relay) ANN-RLY: Relay module. Mounts inside the cabinet. Provides • Relay 3(factory default programmed as Supervisory Relay) ten Form C relays. Special Application Resettable Power—T69: ANN-S/PG:SeriaUparallel printer gateway. Provides a connec- • Jumper selectable by JP31 for resettable or nonresettable tion for a serial or parallel printer power ANN-1/O: Driver module. Provides connections to a user-sup- • Operating voltage:24 VDC nominal. plied graphic annunciator • Maximum available current: 500 mA- appropriate for pow- ACCESSOR/ES ering four-wire smoke detectors. DP-51050: Optional dress panel. Restricts access to the sys- • Power-limited circuit. tem wiring while allowing access to the membrane switch Refer to the Fire•Lite Device Compatibility Document for listed panel. compatible devices. BB-26: Battery backbox, holds up to two 25 AH batteries and Remote Sync Output-TB2: Remote power supply synchro- CHG-75 nization output,only required for the MS-5UD-3.24 VDC nom- gB-55: Battery backbox, holds up to two 25 AH batteries. inal special application power Maximum current is 40 mA. End-of-Line Resistor• 4 7K ohm Supervised and power-lim- TR-CE:Optional trim-ring for semi-flush mounted cabinets. ited circuit. PRN-6F: UL listed printer Product Line Information MS-5UD-3: Five-zone, 24-volt Fire Alarm Control Panel (includes backbox, FLPS-3 power supply, technical manual, and a frame & post operating instruction sheet) 120 VAC operation MS-5UD-3E: Same as MS-5UD-3 except for 240 VAC opera- tion. MS-10UD-7: Ten-zone, 24-volt Fire Alarm Control Panel (includes backbox, FLPS-7 power supply, technical manual, and a frame&post operating instruction sheet) DF-52416:D•07/26/2010—Page 3 of 4