|
, �� �l
<br /> ' � w.�
<br /> �.�� TR1I�IITY:ERD
<br /> 6.5 Deck-ArmorT"' Premium Breathable Roof Deck Protection:
<br /> 6.5.1 Install Deck-Armor'"' Premium Breathable Roof Deck Protection in compliance with
<br /> manufacturer's published installation instructions and the requirements for�STM D226, Type
<br /> . -' '' c^�, �? U.fi(�^-, -��n�.; � FPi�' CP^�. �.. 1�'17 f!'" t'":^ h�p2 Qf r''P.!Ja..,(+ ' _ �rjnr tn �P. � _
<br /> installed_ �
<br /> - , ._�cv r,' �...__,., �- _ .�. ._.... _ -. c..:m... . -
<br /> 6.5.2 Fasteners shall be 1-inch diameter plastic-capped corrosion resistant nails or 1-inch diameter 4
<br /> plastic-capped, corrosion resistant staples.
<br /> 6.5.3 Install a leak barrier of Liberty'"' SBS Self-Adhering Base/Ply Sheet; Ruber��id� SA Base/Ply
<br /> Sheet; StormGuard�; UnderRoof'"' 2; UnderRoofT'" HT; Weather Watr_h� or Weather
<br /> Watch� XT at vulnerable leak areas, including but not limited to eaves, valleys, rakes,
<br /> skylights and dormers. At eaves and valleys, install the leak barrier prior to installation of
<br /> Deck-ArmorT"'. Along the rake, instali Deck-Armor'"', leaving 6 to 8-inch of the deck
<br /> exposed, and then install the leak barrier over the Deck-Armor•"^ and exposed decking. At
<br /> other areas, install the leak barrier over the Deck-Armor""
<br /> 6.5.4 For tile roof installations:
<br /> Installation is governed by the FRSA/TRI 07320/8-05 Installation Manual, Fourth Edition.
<br /> Use is limited to System 1, Option 4, Section 3.02D in place of the"No. 30"felt. The"starter
<br /> strip" and "full-width-sheet" referenced therein shail be proportionate to the width of the
<br /> Deck-ArmorT'" product.
<br /> 6.5.5 For non-tile roof installations.
<br /> 6.5.5.1 Standard Installation with Single Layer; roof slope > 4:12
<br /> Starting at the eave, fasten the eave edge and 6-inch wide end-laps 6-inch o.c. Fasten in the
<br /> field of the roll 12-inch o.c. in two, equally spaced, staggered center rows.
<br /> Continue upslope in a similar manner, maintaining minimum 3-inch side-laps and minimum
<br /> 6-inch end-laps. Fasten 6-inch o.c. in the laps and 12-inch o.c. in twa, equally spaced,
<br /> staggered center rows in the field. Ensure all end laps are staggered at least 3-feet apart.
<br /> 6.5.5.2 Standard Installation with Double Layer; 2:12 < roof slope < 4:12
<br /> Starting at the eave, fasten the eave edge and 6-inch wide end-laps 6-inch o.c. Fasten in the
<br /> field of the roll 12-inch o.c. in two, equally spaced, staggered center rows.
<br /> Continue upslope in a similar manner, with minimum 28.5-inch side-laps and minimum 6-
<br /> inch end-laps. Fasten 6-inch o.c. along the low edge and end laps and 12-inch o.c. in two,
<br /> equally spaced, staggered center rows in the field. Ensure all end laps are staggered at least
<br /> 3-feet apart.
<br /> 6.6 Ti4er Paw'"' Roof Deck Protection•
<br /> 6.6.1 Install Tiger Paw�`" Roof Deck Protection in compliance with manufacturer's published
<br /> instailation instructions and the requirements for ASTM D226, Type I and II underlayments in
<br /> FBC Sections 1507 for the type of prepared roof covering to be instailed.
<br /> 6.6.2 Fasteners shall be 1-inch diameter plastic-capped corrosion resistant nails or 1-inch diameter
<br /> plastic-capped, corrosion resistant staples.
<br /> 6.6.3 Install a leak barrier of LibertyT"' SBS Self-Adhering Base/Ply Sheet; Ruberoid� SA Base/Ply
<br /> Sheet, StormGuard�; UnderRoof'"' 2; UnderRoofTM HT; Weather Watchp or Weather
<br /> Watch� XT at vulnerable leak areas, including but not limited to eaves, valleys, rakes,
<br /> skylights and dormers. At eaves and vaileys, install the leak barrier prior to installation of
<br /> Tiger PawT"'. Along the rake, install Tiger PawT"', leaving 6 to 8-inch of the deck exposed,
<br /> and then install the leak barrier over the Tiger PawT"' and exposed deckinq At other areas,
<br /> install the leak barrier over the Tiger pawT"'
<br /> Exterior Research and Design, LLC. Evaluation Report 01506.04.08-R6
<br /> Certificate of Authorization#9503 FL10626-R6
<br /> Revision 6: 12/13/2011
<br /> Page 6 of il
<br />
|