|
NATIONAL GYPSUM CO—Types FSK-C,FSW,FSW-3,FSW-5,fSW-6,FSW-C,FSW-G,FSMR-C,FSL,SoundBreak XP
<br /> Type X Gypsum Board.
<br /> PABCO BUILDING PRODUCT'S L L C,DBA PABCO GYPSUM—Type C,PG-3,PGS,PG-9,PG-11,PG-C,PGS-WRS.
<br /> PANEL REY S A—Types GREX,PRX,RHX,MDX,EfX or PRC.
<br /> SIAM GYPSUM INDUSTRY(SARABURI)CO LTD—Type D(-1
<br /> TEMPLE-INLAND—Types TG-C,Type X,Veneer Plaster Base-Type X,Water Rated-Type X,Sheathing Type-X,Soffd-Type
<br /> X,GreenGlass Type X,Type X ComfortGuard Sound Deadening Gypsum Board.
<br /> UNITED STATES GYPSUM CO—Type AR,C,FCV,FRX-G,IP-AR,IP-Xl,IP-X2,IPC-AR,SCX,SGX,SHX,WRC,WRX,
<br /> USGX.
<br /> USG MEXICO 5 A DE C V—Type AR,C,IP-AR,IP-Xl,IP-X2,IPC-AR,SCX,SHX,WRC or WRX.
<br /> 4A.Gypsum Board*—(AS an altemate to Rem 4)—Nom 3/4 in.thick,instaNed as described in Rem 4 with 1-1/4 in.bng
<br /> Type S screws for inner layer and 2-1/4 in.bng Type S screws for outer layer.
<br /> CGC INC—Types AR,IP-AR.
<br /> UNITED STA7ES GYPSUM CO—Types AR,IP-AR.
<br /> USG MEXICO S A DE C V—Types AR,IP-AR.
<br /> 4B.Gypa�nn Board*—(As an akemate to ltem 4 and 4A)—5/8 in.thick,24 to 54 in.wide,applied horizontaNy as the
<br /> outer layer to one side of the assembly.Hor¢ontal joints need not be backed by steel framing.Secured as described in Aem
<br /> 4 for the direct attached system.When used in widths other than 48�.,gypsum panels to be i�taled tar¢ontally.
<br /> CGC INC—Type SHX.
<br /> CERTAIMEED GYPSUM INC—Type X,Type C.
<br /> CERTAINTEED GYPSUM CANADA INC—Type X,Type C.
<br /> UNITED STATES GYPSUM CO—Type SHX,FRX-G.
<br /> USG MEXICO S A DE C V—Type SHX.
<br /> 4C.Gypsum Board* —(As an aRemate to Items 4,4A and 4B)—Two layers of 5/8 in.thick gypsum board appNed
<br /> horizontally or vertically.Inner layer attached to studs wth No.6 by 1 in.bng Type S bugle head screws spaced 24 in.OC
<br /> abng the top and bottom tracks staRing 2 in.and then 12 in.from the vertkal edge.Inner layer screws spaced 24 in.OC
<br /> abng the studs,starting 2 in.and then 12 in.from the top and bottom of the studs and starting 1-1/4 in.from the
<br /> horrzontal joints when instaMed horizontaly.Outer layer attached to studs with 1-5/8 in.bng Type S bugle head screws
<br /> spaced 16 in.OC abng the top and bottom tracks starting 1-3/4 in.from the vertical edge.Outer layer screws spaced�6
<br /> in.OC abng the studs,starting 1-3/4�.and then 8 in.from the top and bottom of the studs and start�g 1-1/4 in.and
<br /> then S in.from the ho►¢ontal joints when mstaMed horaontaly.vertical joints centered over studs and staggered one stud
<br /> cavity on opposite sides of studs.Vertical joints in adJacent layers staggered one stud cavRy.Horizontal joints need not be
<br /> backed by steel framing.Horizontal edge joirrts and horizontal butt joints on opposite sides of studs need not be sWggered.
<br /> Horaorrtal edge joints and horizontal butt joints in adjacent layers staggered a min of 12 in.When outer layers are installed
<br /> hoNzontaYy,vinyl or casev�,dry or premized ioint compound shal be appied in two coats to joints and screw heads of
<br /> outer layer.Paper tape,nom 2 in.wide,embedded in first layer of compound over aN jotrts of outer layer panels.Nom 3/32
<br /> in.thick gypsum veneer plaster may be appYed to the entire surface of Classified veneer baseboard.loints 2inforced.
<br /> GEORGIA-PACIFIC GYPSUM L L C—Types 5,9,C,DAP,DGG,DS.
<br /> 4D.Gypsum Bosrd*—(Not Shown)-(As an altemate to Rem 4 when used as the base layer on one or both sides of
<br /> 5 of 7 7/25/2012 2:52 PM
<br />
|