|
2E.Framirg Members*—Steel Studs—As an aRemate to Item 2-For use with Rem lE,channel shaped studs,min
<br /> 2-1/2 in.wide fabricated from min 25 MSG steel,spaced a max of 24 in.OC.Studs to be cut 3/4 in,less than assemby
<br /> height.
<br /> ' KIRII(FlONG KONG)LTD—Type KIRII
<br /> 3.Batts and Blankets*—(Optional)—Mineral wool or glass fiber batts partiaNy or completey fiNing stud cavity.Fasten
<br /> each batt to wallboard base layer with a min 9/16 in.bng staple.Use five staples for each 4 ft piece.Drive one staple i�the
<br /> center of each piece and a staple at each comer,approx 3 in.from edges.
<br /> See Batts and Blsnkets(BZIZ)category for names of manufacturers.
<br /> 3A.F�er,Sprayed*—As an altemate to Batts and Blankets(Item 3)—Spray applied ceNubse material.The flber is
<br /> applied with water to completely fill the encbsed cavity in accordance with the applicatbn fnstructans supplied with the
<br /> product.Nominal dry density of 3.0 Ib/ft3.Altemate appNcatan method:The fiber s applied with U.S.Greenfiber LLC Type
<br /> AD100 hot melt adhesive at a nominal rata of one part adhesive to 6.6 parts fiber to completey tili the encbsed cavity in
<br /> accordance with the applicatan instructions suppked wth the product.Nomfnal dry density of 2.5 Ib/R3.
<br /> U S GREENFIBER L L C--Cocoon2 Stabilaed or Cocoon-FRM(Fire Rated Material)
<br /> 3B.Fiber,Sprayed*—0.5 an aRemate to Batts and Blankets(Ikem 3)and Aem 3A-Spray appNed cepubse insulation
<br /> material.The fiber is appAed with water to interior surfaces in accordance w�h the application irutructions suppNed with the
<br /> product.Applied to completely flN the encbsed cavity.Minimum dry density of 4.3 pounds per cubic R.
<br /> NU-WOOL CO INC—Ceilubse Insulatb�
<br /> 3C.Fber,Sprayed+—As a�aRemate to Batts and Blankets(Rem 3)-Spray appNed cellubse fiber.The fiber is applied
<br /> with water to completey fid the encbsed cavity in acmrdance with the appNcat'an instructbns suppAed with the product.
<br /> The minimum dry densi[y sha9 be 4.30 Ibs/ft3.
<br /> IMERNATIONAL CELLULOSE CORP—Celbar-RL
<br /> 4.Gypsum Board'�—5/8 in.thick,outer layer paper,glass mat or vmyl surfaced.(Laminated System)Gypsum board
<br /> applled vertically in two layers.Inner layer attached to studs wkfi 1 in.bng Type S steel screws spaced 8 i�.OC abng
<br /> vertkal edges,and 12 in.OC in the field and outer layer laminated to inner layer with joint compound,appied with a
<br /> notched spreader producing contlnuous beads of compound about 3/8 m.in diameter,spaced not greater than 2 in.OC.
<br /> Joints of laminated outer layer offset 12 in.from inner layer joirts Outer layer gypsum board attached to floor and ceNing
<br /> mm�er track wkh 1-5/8 in.bng Type S steel screws spaced 12 in.OC.
<br /> Optional,(Direct Attached System),Inner layer attached to studs with i in.bng Type 5 steel screws spaced 16 in.OC in
<br /> the field and abng the vertical edges.Outer layer attached to the studs over the inner layer with 1-5/8 in,bng Type S steel
<br /> screws spaced 16 h.OC in the field and abng the vertical edges and 12 in.OC to the fbor and ceiing runners.]ok�ts of
<br /> screw-attached outer layer offset from inner layer joints.Joints of outer layer may be taped or untaped.
<br /> Nom 3/32 in.thick gypsum veneer plaster may be applied to the errtire surface of Classified veneer baseboard.Joints
<br /> rerc�fo rced.
<br /> ACADIA DRYWALL SUPPLIES LTD—Type X
<br /> AMERIGN GYPSUM CO—Types AG-C,AGX-1,M-Glass,AGX-11.
<br /> BELIING NEW BUriDING MATERIALS PUBLIC LTD CO—Type DBX-1.
<br /> CERTAIM'EED G1fPSUM INC—Types 1,FRPC,EGRG,GlasROC,Type X or Type C,5/8"Easi-Lite Type X.
<br /> CERTAIIYTEED GYPSUM CANADA INC—Type C,Type X or Type Abuse-Resistant,5/8"Easi-Lite Type K.
<br /> CGC INC—Type AR,C,1P-AR,ID-Xi,IP-X2,IPC-AR,SCX,SHX,WRC or WRX.
<br /> GEORGIA-PACIFIC GYPSUM L L C—Types 5,6,9,C,DAP,DD,DA,DAPC,DGG,DS,GPFS6,L5.
<br /> LAFARGE NORTH AMERICA INC—Types LGFC2,LGFC2A,LGFC3,LGFC6,�GFC6A,LGFGC,LGFGC/A,LGFC-WD,
<br /> LGLLX.
<br /> 4 of 7 7/25/2012 2:52 PM
<br />
|