12-13282 - Laserfiche WebLink

Browse Search

Specifations Product Line Information Diameter:6.1'(15.5 cm)installed in B350LP(A) NOTE:A"suffix indicates ULC-Listed model. Height:2.1'(5.33 cm). H355: Intelligent thermal sensor;6350LP base included. Weight:4.8 oz.(137 g). H355A: Same as H355 but with ULC Listing (6350LPA base Installation temperature: �°F to 100°F(-20°C to 38°C). included). Humidity range: 10% to 93% relative humidity (noncon- H355R:Same as H355 with rate-of-rise feature;6350LP base densing) included. Voltage range: 15 to 32 VDC peak. H355RA: Same as H355R but with ULC Listing (B350LPA base included). Standby current: 300 NA � 24 VDC (one communication H355HT: Intelligent fixed high-temperature thermal detector; every five seconds with LED blink enabled). B350LP base included. LED current:6.5 mA� 24 VDC. H355HTA: Same as H355HT but with ULC Listing (6350LPA Mounting: B350LP(A)flanged base, included. base included). Fixed-temperature setpoint: 135°F (57°C) for the H355(A) B350LP(A): Plug-in detector base (included). Dimensions: and H355R(A); 190°F(88°C)for the H355HT(A). 6.1" (15.5 cm). Mounting:4.0°(10.16 cm)square box with or Rate-of-rise detection:responds to greater than 15°F(8.3°C) Without plaster ring, 4.0' (10 16 cm) octagonal box, 3.5" (8.89 per minute. cm) octagonal box, or single-gang box. All mounting boxes have a minimum depth of 1.5'(3.81 cm). Listings and Approvals B224R6(A): Plug-in System Sensor relay detector base. Listings and approvals below apply to the H355(A) Series Dfameter:6.2'(15.75 cm). Mounting:4.0"(10.16 cm)square detectors. In some cases, certain modules may not be listed box with or without plaster ring,4.0'(10 16 cm)octagonal box, or 3.5' (8.89 cm) octagonal box. All mounting boxes have a by certain approval agencies, or listing may be in process. minimum depth of 1.5"(3.81 cm). Consult factory for latest listing status. MEA approved:file 387-02-E B224BI(A): Plug-in System Sensor isolator detector base. � Maximum 25 devices between isolator bases(see DF-52389). • UL Listed,file S2517 Dlameter.6.2"(15.75 cm).Mounting:4 0'(10.16 cm)square • ULC Listed(models H355A,H355RA, H355HTA) box with or without plaster ring,4 0'(10 16 cm)octagonal box, • CSFM approved:file 7270-0075:195 or 3.5' (8.89 cm) octagonal box. All mounting boxes have a FM approved minimum depth of 1 5'(3.81 cm) • B501 BH-2(A): Plug-in System Sensor standard sounder base. Diameter:6 0" (15.24 cm). Mounting:4.0' (10.16 cm) square box with or without plaster ring. Mounting boxes have a minimum depth of 1.5'(3.81 cm). B501 BHT 2(A): Plug-in System Sensor temporal tone sounder base. ACCESSOR/ES: RA400Z(A): Remote LED annunciator.3-32 VDC. Mounts to a U S. single-gang electrical box. For use with B501(A) and 6350LP(A)bases only. SMK400E: Surface mounting kit provides for entry of surface wiring conduit. For use with 6501(A)base only. RMK400: Recessed mounting kit. For use with 6501(A) base only. M02-04-0O:Test magnet. M02-09-00:Test magnet with telescoping handle. XR2B: Detector removal tool.Allows installation and/or removal of detector heads from bases in high ceiling applications. XP-4: Extension pole for XR2B. Comes in three 5-foot(1.524 m)sections. Fire�Lite�Alarms is a registered trademark of Honeywell International Inc. Bayblend�is a registered trademark of Bayer Corporation. �2008 by Honeywell International Inc. All rights reserved.Unauthorized use of this document is strictly prohibited. ' O� This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. . We cannot cover all specific applications or anticipate all requirements. �� All specifications are subject to change without notice. l�AIITr S�8TEMS For more information,contact Fire�Lite Alarms.Phone:(800)627-3473,FAX.(877)699-4105. www.firelite.com Page 2 ot 2-df-52385:A•12/17/08