12-13441 - Laserfiche WebLink

Browse Search

df-52417:c•B-90 ANN-so � �ne��i-re°A�arms 80-Character LCD seria� �►nnunciator by Honeywell General The ANN-80 annunciator is a compact, backiit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panei (FACP) display It provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced condi- tions. The ANN-80 and the FACP communicate over a two-wire serial intertace employing the ANN-BUS communication format Connected devices are powered, via two additional wires, by either the host FACP or a remote UL-listed,filtered power supply. ANN-BO is red;for white,order ANN-80-W � The ANN-80 displays English-tanguage text of system point information including device type, zone, independent point alarm, trouble or supervisory status, as well as any custom alpha labels programmed into the control panel. It includes con- _ trol switches for remote control of critical system functions. (A keyswitch prevents unauthorized operation of the control switches.) $ e Up to eight ANN-80s may be connected to the ANN-BUS of each FACP No programming is required,which saves time dur- " ing system commissioning. Features • Listed to UL Standard 864,9th Edition. • Backlit 80-character LCD display(20 characters x 4 lines) • Supervisory • Mimics all display information from the host panel. • Alarm Silenced • Control switches for System Acknowledge, Signal Silence, Drill,and Reset. $pecifications • Controi switches can be independently enabled or disabled • Operating voltage range: 18 VDC to 28 VDC. at the FACP • Current consumption � 24 VDC nominal(filtered and non- • Keyswitch enables/disables control switches and mechani- resettable):40 mA maximum. cally lodcs annunciator enclosure • Ambient temperature:32°F to 120°F(0°C to 49°C). • Keyswitch can be enabled or disabled at the FACP • Relative humidity:93%t 2% RH (noncondensing)at 32°C • Enclosure supervised for tamper t 2°C(90°F t 3°F) • System status LEDs for AC Power, Alarm, Trouble, Supervi- • 5.375" (13.65 cm.) high x 6.875" (17 46 cm.) wide x 1.375" sory,and Alarm Silence. (3.49 cm.)deep. • Local sounder can be enabled or disabled at the FACP • For use indoors in a dry location. • ANN-80 connects to the ANN-BUS terminal on the FACP and • All connections are power-limited and supervised. requires minimal panel programming. • Displays device type identifiers, individuai point alarm, t�o�- Agency Listings and Approvals ble,supervisory,zone,and custom alpha labels. Time-and date display field. The iistings and approvals below appfy to the ANN-80 In some � cases, certain modules may not be listed by certain approval • Surface mount directiy to wall or to single, double, or 4' agencies,or listing may be in process.Consult factory for latest square electrical box. listing status. • Semi-flush mount to single, double, or 4" square electrical . UL:S2424 box. Use ANN-SB80KIT for angled view mounting. • Can be remotely located up to 6,000 feet(1,800 m)from the ' FM approved panel. • CSFM:7120-0075:211 • Backlight turns off during AC loss to conserve battery power • MEA:442-06-E but will turn back on if an alarm condition occurs. • May be powered by 24 VDC from the host FACP or by remote The ANN-BV$ power supply(requires 24 VDC) • Up to eight ANN-80s can be connected on the ANN-BUS. �WERfNG THE DEVICES ON THE ANN-BUS FROM AUXILIARY POWER SUPPLY Controls and Indicators The ANN-BUS can be powered by an auxiliary power supply when the mauimum number of ANN-BUS devices exceeds the • AC Power ANN-BUS power requirements. See the FACP manual for more • Alarm information. • Trouble df-52417:c•05/22/09—Page 1 of 2