13-14582 - Laserfiche WebLink

Browse Search

DN-7001:D•Ai-3B0 {�IOT-BG 12LX � ��1 � � � �� Addressable Manual Pull Station by Honeywell , General - The Notifier NOT-BG12LX is a state-of-the-art, dual•action � ' (i.e., requires two motions to activate the station) pull station that includes an addressable interface for FireWarden series intelligent control panels,and the NSP-25 panel. Because the NOT-BG12LX is addressable,the control panel can display the -- - exact location of the activated manual station. This leads fire personnel quickly to the location of the alarm. , � Features � �� • Maintenance personnel can open station for inspection and address setting without causing an alarm condition. � Built-in bicolor LED, which is visible through the handle of the station, (lashes in normal operation and latches steady _ .•r�- red when in alarm, • Handle latches in down position and the word"ACTIVATED" appears to clearly indicate the station has been operated. � • Captive screw terminals wire-ready(or easy connection to � � � SLC loop(accepts up to 12 AWG13.25 mm2 wire) •. • Can be surface mounted (with SB-10 or SB-I!O) or semi- flush mounted. Semi-flush mount to a standard single- gang,double-gang,or 4"(10.16 cm)square electrical box. • Smooth dual-action design The NOT-BG121.X • Meets ADAAG controls and operating mechanisms guide- Add1'eSSBble MBnual PUII Station lines (Section 4 1.3[13]); meets ADA requirement for 5 Ib. maximum activation torce. • Highly visible. The BG12TR is usually needed for semi-fiush mounting with 4" • Attractive shape and textured finish (10.16 cm)or double-gang boxes(not with single-gang boxes). � Key reset. Operation • Includes Braille text on station handle. • Optional trim ring(BG12TR} Pushing in,then pulling down on the handle causes it to latch in the down/activated position. Once latched,the word"ACTI- • Meets UL 38, Standard for Manually Actuated Signaling VATED" (in bright yellow) appears at the top of the handle, Boxes. while a portion of the handle protrudes from the bottom of the station.To reset the station,simply unlock the station with the Construction key and pull the door open.This action resets the handle;clos- Shell, door, and handle are molded of durable polycarbonate ing the door automatically resets the switch. material with a textured finish Each manual station, on command from the control panel, sends data to the panel representing the state of the manual Specifications switch.Two rotary decimal switches allow address settings (1 -99 on NFW2-100lNFW2-100C, 1 -50 for NFW-50/NFW- • Shipping Weight:9 6 oz.(272.15 g) 50C). • Normal operating voltage:24 VDC. • Maximum SLC loop voltage:2a.o voc. Architectural/Engineering • Maximum SLC standby current:375 NA. Specifications • Maximum S�C alarm current:5 mA. Manual Fire Alarm Stations shall be non-coded, with a key- • Temperature Range:32°F to 120°F(0°C to 49°C) operated reset lock in order that they may be tested, and so � Relative Humidity: 10%to 93%(noncondensing) designed that after actual Emergency Operation, they cannot be restored to normal except by use of a key An operated sta- • For use indoors in a dry location tion shall automatically condition itseli so as to be visually detected as activated Manual stations shall be constructed of Installation red-colored polycarbonate material with clearly visible operat- The NOT-BG12LX will mount semi-flush into a single-gang, ing instructions provided on the cover The word FIRE shall double-gang,or standard 4"(10 16 cm)square electrical outlet appear on the front of the stations in white letters, 1 00 inches box, or will surface mount to 1he model SB-10 or SB-I!O sur• (2•54 cm) or larger. Stations shall be suitable for surface face backbox. If the NOT-BG12LX is being semi-flush mounting on matching backbox SB-10 or SB-IlO;or semi-flush mounted, ihen the optional trim ring (BG12TR) may be used. mounting on a standard single-gang, double-gang, or 4' (10 16 cm) square electrical box, and shall be installed DN-1001:D•4/13f2012—Page i ol 2