Laserfiche WebLink
D. Installation personnel shall be qualified or shall be supervised by persons who are <br /> qualified in the installation, inspection, and testing of the systems. <br /> E State of local licensure regulations shall be followed to determine qualified personnel <br /> Depending on state or local licensure regulations, qualified personnel shall include, but <br /> not be limited to, one or more of the following� <br /> 1. Personnel who are registered, licensed or certified by a state or local authority. <br /> 2. Personnel who are certified by a nationally recognized certification organization <br /> acceptable to the AHJ <br /> 3 Personnel who are factory trained and certified for fire alarm system installation of <br /> the specific type and brand of system and who are acceptable to the Owner, <br /> Engineer and AHJ <br /> F. The system installer shall provided evidence of their qualifications and/or certifications <br /> when requested by the Owner, Engineer or AHJ. <br /> 1 06 REGULATORY REQUIREMENTS <br /> A. All work shall meet the requirements of all applicable codes and referenced design <br /> standards. <br /> B. No approvals or interpretations of the design documents shall be pursued except through <br /> the Engineer <br /> C Any work performed prior to the satisfactory review of the shop drawings by the Engineer, <br /> approval by the AHJ, and determined to be noncompliant with the contract documents or <br /> applicable codes by the Owner or AHJ will be replaced at the Contractors' expense. <br /> D The system will not be acceptable until final testing and receipt of the Inspection and <br /> Testing Form has been obtained. <br /> 107 SUBMITTALS <br /> A. The engineering drawings have been prepared using AutoCAD. These documents will be <br /> made available either in electronic or hard copy form. The engineering drawings will be <br /> used as shop drawings and for permit application. Utilization of the engineering drawings <br /> as shop drawings and submittals does not relieve the Contractor from any responsibilities <br /> required herein <br /> B. In the submittals, the Contractor must clearly identify all areas and sections of this <br /> specification to which they take exception or are not capable of providing If <br /> discrepancies are found, the Contractor shall immediately bring the conflict to the <br /> attention of the Owner and Engineer for resolution <br /> C. Submittals will be disapproved unless required equipment literature and qualifications are <br /> submitted together as one package for review. <br /> Hobby Lobby—Zephyrhills, FL FIRE ALARM SYSTEM <br /> Issued for Permit—October 23, 2013 16720 -4 <br />