Laserfiche WebLink
_, �,_ <br /> , , <br /> CAUTION: Direct contact between pressure treated lumber, green, ' <br /> damp, and metal roofing must be avoided in order to prevent potential <br /> corrosion and moisture buildup. THE battens must be fastened to the roof <br /> deck with minimum#6 screws at 12" on-center or two mimnimum 8d common <br /> or pneumatic nails spaced 8" on-center or one every 4" on-center (or by <br /> applicable calculations according to ASCE 7-98.) <br /> Battens must be installed to support the entire width and length of ridge, <br /> eave, hip,valley, and gable end trims. Battens are optional if re-roofing over <br /> shingles. . <br /> Note: Re-roofing over shingles without a batten is allowed providing the roof <br /> has been checked by a licensed roofing contractor to insure levelness and <br /> pullout integrity. Put down 30# Felt with a 30" lap on Felt Paper. <br /> I <br />� <br />' <br />