15-15894 - Laserfiche WebLink

Browse Search

� - �, i r TRINIIY I ERD TABLE 76:STEEL-RECOVER SYSTEM TYPE C-2:PLATE-BONDED ROOF COVER All areas where the existing metal panels do not lay flush on the underlying purlin shall have a 0.25-inch diameter pilot hole pre-drilled into Yhe panel prior to driving the Purlin Fastener into the purlin System Substrate Attachment InsulationLayer RoofCover/Adhesive MDP(psf) No. (See Note 1) Fasteners Spacing Existing standing seam or lap seam metal One or more layers,any Versico Purlin Fasteners and VersiWeld bonded to RHINOBOND Insulation Plate roof covers having min.16 ga.(0.0598- 6-inch o.c.along purlins R-20 combination, RHINOBOND Insulation Plate(TPO) (TPO)with RHINOBOND tool per manufacturer's -37.5 inch)to max.3/16-inch thick steel purlins 120-inch o.c. spaced max.120-inch o.c. preliminarily fastened are fastened through to purlins instructions. Existing standing seam or lap seam metal One or more layers,any Versico Purlin Fasteners and VersiWeld bonded to RHINOBOND Insulation Plate roof covers having min.16 ga.(0.0598- 12-inch o.c.along R-21 combination, RHINOBOND Insulation Plate(TPO) (TPO)with RHINOBOND tool per manufacturers -37.5 inch)to max.3/16-inch thick steel purlins purlins 60-inch o.c. spaced max.60-inch o.c. preliminarily fastened are fastened through to purlins instructions. Existin standing seam or lap seam metal A Versico Purlin Fasteners and . VersiWeld bonded to RHINOBOND Insulation Plate roof covers having min.16 ga.(0.0598- c��e:c�leRg$udi R_ZZ combination, RHINOBOND Insulation Plate(TPO) TPO wit RH too per manu a ure s - . inch)to max.3/16-inch thick steel purlins 60-inch o.c. spaced max.60-inch o.c. preliminarily fastened are fastened through to purlins instructions. TABLE 7C: STEEL-RECOVER --- SYSTEM TYPE D-1: INSUTATED,MECHANICALLY ATTACHED ROOF COVER All oreas where the existing metal ponels do not lay flush on the underlying purlin shall have a 0.25-inch diameter pilot hole pre-drilled into the ponel prior to driving the Purlin.Fastener into the purlin Insulation Roof Cover System No. Deck MDP(psfl Type Attach Membrene Fasteners Attachment Existing standing seam or lap seam metal roof One or more Versico Purlin 12-inch o.c.within 5.5-inch wide laps spaced max.138.5- covers having min.16 ga.(0.0598-inch)to Prelim. VersiWeld or R-23 layers,any Fastener and HPV- inch o.c.to engage steel purlin. Laps sealed with 1.5-inch 30.0 max.3/16-inch thick steel purlins spaced max. combination attach VersiWeld Plus X Plate heat weld. 138.5-inch o.c. Existing standing seam or lap seam metal roof One or more Versico Purlin 12-inch o.c.within 5.5-inch wide laps spaced max.115- covers having min.16 ga.(0.0598-inch)to Prelim. VersiWeld or R_Zq layers,any Fastener and HPV- inch o.c.to engage steel purlin. Laps sealed with 1.5-inch -45.0 max.3/16-inch thick steel purlins spaced max. �ombination attach VersiWeld Plus X Plate heat weld. 115-inch o.c. Existing standing seam or lap seam metal roof One or more ' Versico Purlin 12-inch o.c.within S.5-inch wide laps spaced max.54.5- covers having min.16 ga.(0.0598-inch)to Prelim. VersiWeld or R-25 layers,any Fastener and HPV- inch o.c.to engage steel purlin. Laps sealed with 1.5-inch -60.0 max.3/16-inch thick steel puriins spaced max. combination attach VersiWeld Plus X Plate heat weld. 54.5-inch o.c. Existing standing seam or lap seam metal roof One or more Versico Purlin 6-inch o.c.within 5.5-inch wide laps spaced max.138.5- covers having min.16 ga.(0.0598-inch)to Prelim. VersiWeld or R-26 layers,any Fastener and HPV- inch o.c.to engage steel purlin. Laps sealed with 1.5-inch -60.0 max.3/16-inch thick steel purlins spaced max. combination attach VersiWeld Plus X Plate heat weld. 138.5-inch o.c. Exterior Research and Design,LLC.d/b/a Trinity� ERD Evaluation Report C35230.11.30-RS for FL14207-R6 Certificate of Authorization#9503 Revision 5:06/19/2014 Prepared by: Robert Nieminen,PE-59166 Appendix 1,Page 33 of 36