Laserfiche WebLink
i <br /> i <br /> , I 1 <br /> ! <br /> I <br /> � I <br /> SECTION 01045 -CUTTING AND PATCHING <br /> � i <br /> PART 1 -GENERAL <br /> I <br /> ' <br /> 1!1 DESCRII'TION <br /> ' I A. Execute cutting, fitting, and patching (including excavation and backfill) to complete the work ' <br /> and to: <br /> I 1. Fit the arts to ether and ro erly integrate with other work. I <br /> 1 P g PP <br /> 2. Uncover work to provide for installation of ill-timed work. <br /> 3. Uncover work to provide for Owner's observation of covered work. <br /> ' , 4. Remove and replace noncomplying work performed under contract. <br /> 5. Remove samples of installed work for testing. <br /> � 6. Provide openings in non-structure elements for penetrations of inechanical and electrical <br /> iI work. <br /> , B. In addition to requirements above,upon written instructions of Owner: <br /> I <br /> I <br /> I' 1. Remove samples of installed materials for testing. <br /> 2. Remove items to provide for alteration of existing work. <br /> � <br /> � I <br /> 1�.2 PRECAUTIONS <br /> I <br /> � A. Do not endanger work when cutting or altering. <br /> B. Do not cut or alter work of another trade without consulting the trade involved and the <br /> , Superintendent of construction. <br /> 13 SUBMITTALS <br /> ' � <br /> A. Submit items in accordance with Section 01300. <br /> B. I Prior to cutting any structural member, submit written notice to the Structural Engineer <br /> ' requesting consent to proceed with cutting including: <br /> ' 1. Identifications of project. <br /> 2. Description of affected work. <br /> ' 3. `�Necessity for cutting. <br /> � 4. Effect on other work, and on structural integrity of project. <br /> ' ; 5. Description of proposed work. Designate scope of: <br /> � <br /> ' a. Cutting and patching <br /> ' � I b. Trades required to perform work. <br /> c. Products proposed to be used. <br /> � d. Extent of refinishing. <br /> , ' <br /> ' March 3,2000 01045-1 99048.00 <br />