|
TR�I''�liT� ERD
<br /> 5.6.2.3 Maxirnum Desi Pressure=-1Q5.4 sf:
<br /> Deck: Min.15/32-inch piywood to meet project requirements to satisfaction of AHJ.
<br /> Primer: FIiMPrime SA orASTM D41
<br /> Base AIy: {ppt�onal)flint(astic SA PlyBase or Ftinttastic SA Mid Piy,selF-adhered.
<br /> Underlayment: Flintlastic SA Cap,self-adhered.
<br /> 5.6.2.4 Nlaximum Desi n Pressure=-127.5 sf:
<br /> Deck: Min.19/32-inch plywood to meet project requirements to satisfaction af AHJ,
<br /> Primer: FlintPrirne SA �
<br /> loints: Min.4-inch wide strips of Piit�t(astic SA Piy8ase,self-adhered ovet att ptywood joints.
<br /> ease Ply: (Optional)Fiintlastic SA PlyBase or Flintlastic SA Mid Ply,self-adhered.
<br /> Underlayment: Flintlastic SA Cap,self-adheeed.
<br /> 5.6.2.5 Alt otfier direct-d ck,adhered CertainTeed underlayment systems beneath foam-on or mortar-set#ile systems carry a �,
<br /> Maximum Design Pressure of-45 psf.
<br /> 5.6.3 Bond to Base I.a r Underla ment:
<br /> � WinterGuerd H ,WinterGuard Sand,WinterGuard Granular or MetaLayrnent self-adhered to: ASTM D226,Type I or II felt.
<br /> ►� Black Diarnond ase Sheet,Flintlastic SA PtyBase,Elinttastic SA Mid Pfy,Fiinttastic Uttra Glass SA;FtlnttastiC SA Cap,Flinflastic SA �
<br /> Cap FR self-adh red to:Flintlastic SA NaitBass or ASTM D226,Type i or II feit.
<br /> ➢ Flintlastic SA Ca or Flintlastic SA Cap FR self-adhered to: Flintlastic SA PlyBase or Flintlastic SA MidPly.
<br /> ➢ Flintlastic GMS r ElinttasYic Premium GfVtS in hot asghaft to: ASTM D225,Type t or 11 felt;ASFM D2626 fett,ASTNI DA601,Type
<br /> Ii base sheet,8i ck Diamond 8ase Sheet or Fiintiastic U1tra Glass SA.
<br /> ➢ Flintlastic GTA t rch-applied to: AS7M D226,Type I or II felt;ASTM D2626 felt,ASTM D4601,Type II base sheet,Black Diamond
<br /> Base Sheet or H 2lastic tlitra 61ass SA.
<br />' For installations nder mechanically attached prepared raaf coverings, base layer shall be attached per minimum
<br />� codifled requirem nts. For installations under foam-on or rnortar-set tile systems,base layer shaU be attached per
<br />! minimum require ents of FRSAjTRI April 2012 {Q4-12), but not less#han that detailed below. iVfaximum Design
<br /> Pressure is the r ult of testing for wind load resistance based on allowable wind loads, and reflects the ultimate
<br /> passing pressure ivided by 2(the 2 to I margfn of safety per F8C 2504.9 has already been apptied}. Refer to�BC
<br /> 16Q9 for determin tian of design wind loads.
<br /> 5.6.3.1 Maximum Desi n ressure=-37.5 sf:
<br /> Deck: in.25J32-inch plywaod to rneet project requirements to satisfaCtion of AH1.
<br /> ease Sheet: STM D226,Type II felt or Flintlastic SA NailBase mechanically attached with 12 ga., 1'/<-inch long galvanized
<br /> ing shank nails through 32 ga.,15J8-inch diameter tin caps spaced 6-inch o.c.at Yhe 4-inch laps ar�d 12-lnch
<br /> .c.at two{2)staggered rows in the field of the sfieet.
<br /> Base Ply: Optional)Flintlastic SA PlyBase or Flintlastic SA Mid Ply,self-adhered.
<br /> Underlayment: iintfastic SA Cap,self-adhered.
<br /> ,
<br /> 5.6.3.2 Maximum Desi n ressure=-52.5 sf:
<br /> Deck: in.i5f32-inch plywood to meet project requirements to satisfacYion af AHl.
<br /> Base Sheet: tintlastic SA NailBase mechanicatty attached with min.1-inch{ong,12 ga.Simpiex Metal Cap Nails spaced 6-
<br /> � nch a.c,at the min.2-inch laps and 6-inch o.c.at four(4)staggered rows in the field of the sheet.
<br /> Base Ply: Optionaf if top layer is Flintlastic SA Cap)Flintlastic SA PlyBase or Flint3estic SA Mid PIy,self-adhered.
<br /> Underiayment: iintiastic SA Cap,self-adhered,
<br /> 5,6.3.3 Maximum Desi n ressure=-6�.0 sf: '
<br /> Deck: in.19f32-inch ptywood to meet projeek requirements to satisfaction of AH1.
<br /> Base Sheet: lintlastic SA NailBase mechanically attached with 12 ga.,1'/<-inch long galvanized ring shank nails through 32 �
<br /> a.,15J&-inch diameter tin caps spaced 8-inch a.c.at the min.2-inch taps and 8-inch a.c.at three{3}staggered
<br /> ows in#he ffeld of the sheet.
<br /> Base Ply: ptional if top layer is Flintlastic SA Cap)Flintlastic SA PlyBase or Flintlastic SA Mid Ply,self-adhered.
<br /> Underiayment: Jinttastic SA Cap,seif-adhered.
<br /> 5.6.3.4 Maxirnum Desi n ressure=-75.0 sf:
<br /> Peck: in.29J32-inch plywoad to meet project requirements to satisFactian of AN1.
<br /> 8ase Sheet: tiniiastic SA NaitBase mechanicaily attached with 12 ga.,1*/.-inch fong galvanized ring shank nails through 32
<br /> a.,15/8-inch diameter tin caps spaced 6-inch o.c.at the min.2-inch laps and 6-inch o.c.at four(4)staggered
<br /> ws in Yhe�eid of fhe sheet.
<br /> 8ese Pty: ( ptionat if top tayer is Ffintiaskic SA Cap)Fiintlastic SA PlyBase or Flintlastic SA Mid Piy,seff-adhered.
<br /> Underlayment: lintlastic SA Cap,self-adhered.
<br /> Exterior Research and Design,LLC, Evaluateon Repork 11610.09.Q8-R1A �
<br /> Certtfrca' te ofAafhorFzatian#9503
<br /> FL11288-R13
<br /> Revision 14:03/12/2015
<br /> Page 5 a#7
<br />
|