18-19543 - Laserfiche WebLink

Browse Search

TABLE 1A:WOOD DECKS-NEW CONSTRUCTION,REROOF(Tear-Off)or RECOVER SYSTEM TYPE C: MECHANICALLY ATTACHED INSULATION,BONDED ROOF COVER System Deck Top Insulation layer MOP Base Insulation Layer Roof Cover(Note 16) No. (Note 1) Type I Fasteners Attach (Psf) W-1 Min.19/32"plywood or (Optional)One or more layers, Min.1.5-inch Poly ISO 1,H-Shield,ACFoam II, Note 2 1 per 2 fP Mule-Hide TPO-c/TPO-c BA or Aqua -45 0, wood plank any combination,loose laid Poly ISO 2 or ENRGY 3 1 Base 120 BA TABLE 1B: WOOD DECKS—NEW CONSTRUCTION,REROOF(Tear-Off)or RECOVER SYSTEM TYPE D-1: INSULATED,MECHANICALLY ATTACHED ROOF COVER System Roof Deck Insulation Layer(Note 14) Roof Cover MDP No. Type Attach Membrane Fasteners Spacing (PA Min.19/32-inch plywood or wood plank at max.24"spans One or more Preliminarily Mule-Hide Mule-Hide EHD 6-inch o.c.within 5.5-Inch wide laps spaced 90.5-inch W-2 attached using 8d ring shank nails spaced 6"D.C.in the field layers,any Fasteners and 2.4 -52.5 and#10 ring shank nails spaced 4"D.C.at the perimeter combination attached TPO-c Seam Plates - D.C. Outside of lap sealed with 1.5-inch heat-weld Min.19/32-inch plywood or wood plank at max.24"spans One or more Mule-Hide EHD W-3 attached using Sd ring shank nails spaced 6"D.C.in the field layers,any Preliminarily Mule-Hide Fasteners and 2.4 O D.C.within sealed wide laps spaced-wee Inch -67.5 and#10 ring shank nails spaced 4"D.C.at the perimeter combination attached TPA Seam Plates C.C.o.c.Outside of lap sealed with SS-inch heat-weld 6-inch D.C.within 5-inch wide laps spaced 67-inch D.C. Min.23/32-inch OSB at max.24-inch spans attached using One or more Mule-Hide EHD Outside of lap sealed with 1.5-Inch heat-weld and 6- W-4 8d ring shank nails spaced 6"D.C.in the field and 8"D.C.at layers,any Preliminarily attached tckedTPA Fasteners Mule-Hide Fasteners and 2A inch D.C.in one row centered between the laps. -67.5 intermediate supports combination Seani Plates Center row Covered with 6-inch wide cover strip sealed with 1.5-inch heat weld at all edges TABLE 1C:WOOD DECKS-NEW CONSTRUCTION,REROOF(TEAR-OFF)OR RECOVER SYSTEM TYPE D-3:INSULATED,MECHANICALLY ATTACHED BASE SHEET,BONDED ROOF COVER System insulation(Note 14) Base Sheet Roof Cover MDP No Deck(Note 1) Type Attach Base Sheet Fasteners Attach Membrane Adhesive (Psf) Min.19/32-inch plywood at One or more Atlas Summit Mule-Hide Drill Point 12-inch D.C.at the 4-inch laps and 12- Self- layers,max.24-inch spans;#10 x 2- layers,any Loose-laid Synthetic Fastener and Mule-Hide 2" inch D.C.at three,equally spaced Mule-Hide SA-TPO adhered -120.0 inch wood screws,6-Inch o.c. combination Underlayment Seam Plate rows in the center of the sheet. Exterior Research and Design,I.I.C.d/b/a Trinity I ERD Evaluation Report M15060.06.09-R4 for FL12772-R4 Certificate of Authorization#9503 FBC NON-HVHZ EVALUATION;Mule-Hide TPO-c Single Ply Roof Systems Revision 4:04/03/2017 Prepared by: Robert.Nieminen,PE-59166 Mule-Hide Products Co.,Inc.;(608)365-3111 Appendix 1,Page 4 of 26