Laserfiche WebLink
ROC K-IT CLIP SS I Cl STa LL •Raptageh6rduug Location 5 <br /> I IL'AfROA Nm <br /> 1 Locate all parts <br /> -Locate the Rock-.It Clip.SS,micro-inverter/power optimizer,and the section of the module frame in which <br /> YOU will be mounting the micro-inverter/power optimizer. <br /> See fig.A for acceptable mounting locations. <br /> 2 Install the Rock-it Clip SS <br /> • Slide the Rock-it Clip SS onto the lip of the module frame. <br /> • Slide the micro-inverter/power optimizer into the opposite lip of the Rock-It Clip SS. <br /> • Tighten the bolt'to 150 in-lb minumum to clamp the Rock-It Clip SS to the module frame and the <br /> micro-inverter/power optimizer to the Rock-It Clip SS. <br /> • Ensure that the lip on the clip is tight against the frame and that the micro-inverter/power optimizer flange is <br /> tight against the clip flange to avoid rotation during tightening. <br /> ROCK-IT CLIP 2.0 rST aLL <br /> Inverter Flange <br /> Module Frame <br /> Rock-it-Clip 2.0 <br /> 1 Locate all parts <br /> -Locate the Rock-It Clip 2.0,micro-inverter/power optimizer,and the section of the module frame in which you <br /> will be mounting the micro-inverter/power optimizer. <br /> 2.Install the Rock-It Clip 2.0(See below detail) <br /> • Slide the Rock-it Clip 2.0 onto the lip of the micro-inverter/power optimiser. <br /> • Slide the micro-inverter/power optimizer into the opposite lip of the module frame. <br /> • Tighten the bolt to 150 In-lb to clamp the Rock-it Clip 2.6 to the module frame and the micro-inverter/power <br /> optimizer to the Rock-wit Clip 2.0. <br /> • Ensure that the lip on the clip is tight against the frame and that the micro-inverter/power optimizer flange is <br /> tight against the clip flange to avoid rotation during tightening. <br /> www.ecofastensolar.com info@ecofastensolar.com 877-859-3947 7 <br />