Laserfiche WebLink
ROCK-IT CLIP SS WISTaLL •�f� <br /> ., r�:+ ✓gam�,i ` .;t!:t::r <br /> 1 Locate all parts <br /> -Locate the Rock-it Clip SS,micro-inverter/power optimizer,:and the section of the module frame In which <br /> you will be mounting the.micro-inverter/poweroptimizer. <br /> See fig.A for acceptable mounting locations. <br /> 2 Install the Rock it Clip SS <br /> • Slide the Rock-it Clip SS onto-the llp:of the module frame. <br /> • Slide the micro-Inverter/power optimizer Into the opposite lip of the Rock-it Clip SS. <br /> • Tghten the bolt to-150 In-lb minumum to damp the Rock-It Clip SS to the module frame-and the <br /> micro-Inverter/power optimizer.to the Rock-It Clip SS. <br /> • Ensure thatthe lip on the clip is tight against the frame and that the.micro-inverter/power optimizer flange Is <br /> tight against the dip.flange to avoid notation during tightening. <br /> ROCK-IT CLIP 2.0 InSTaLL <br /> Inverter.Flange <br /> Module Frame <br /> Rock-It-Clip.2.0 <br /> 1 Locate atl parts <br /> •Locate the Rock4t Ciip 2.0,micro-inverter/power optimizer,and the section of the module frame iri which you <br /> will be mounting the micro-Inverter/power optimizer. <br /> 2 Install'the Rock-It-Clip 2.0(See below detail) <br /> • -Slidethe Rock ItCllp 2.0 onto the lip of the-micro-Inverter/power optimizer. <br /> • Slide the micro-Inverter/power optimizer into the opposite lip of the module frame. <br /> • Tighten the bolt to 150 in-lb to clamp the.Rock It Clip 2.0 to themoduleframe and the micro-inverter/power <br /> -optimizer to the Rock-It Clip 2.0. <br /> • Ensure that the lip on the clip Is tight against the frame and that the.micro-Inverter/power optimizer flange Is <br /> tight against.the clip flange to avoid rotation during tightening. <br /> wwwecofastensolarcom info@ecofastensolarcom 877-85973947 7 <br />