19-20704 - Laserfiche WebLink

Browse Search

DONNELLY ENGINEERING ELECTRICAL ' Contractor, as indicated on the drawings, or as required by job conditions and as determined by the Engineer in the field, to facilitate the installation of the new systems. The Owner shall require continuous operation of the existing systems, while demolition, relocation work or new tie-ins are performed. B. Coordination: Prior to any deactivation and relocation or demolition work, arrange a conference with the Engineer and the Owner's representative in the field to inspect each of the items to be deactivated, removed or relocated. Care shall be taken to protect all equipment designated to be relocated and reused or to remain in operation and be integrated with the new systems. C. Provisions: All deactivation, relocation, and temporary tie-ins shall be provided by the Contractor. All demolition, removal and the legal disposal of demolished materials of system designated to be demolished shall be provided by the Contractor. D. Owners Salvage: The Owner reserves the right to inspect the material scheduled for removal and salvage any items they chose to be usable as spare parts or for other use. E. Phasing: The Contractor shall perform all work in phases as directed by the Engineer to suit the project progress schedule, as well as the completion date of the project. PART2- PRODUCTS 2.1 Product Directives A. Specified Method: Where several brand names, make or manufacturer are listed as acceptable, the acceptance shall be based on the design selection. Where a manufacturer's model number is listed, this model shall set the standard of quality and performance required. Where no brand name is specified, the source and quality shall be subject to the Engineer's review and acceptance. Where three manufacturers are listed, one of the listed manufacturers shall be submitted for acceptance. No substitutions are allowed unless the substitution process is accepted by the Engineer B. Certification: When a product is specified to be in accordance with a trade association or government standard requested by the Engineer, the Contractor shall provide a certificate that the product complies with the referenced standard. Upon request of the Engineer, the Contractor shall submit supporting test data to substantiate compliance. C. Basis of Bid: Each bidder represents that his bid is based upon the manufacturer's materials, and equipment described in the Contract Documents. D. Space Requirements: Substituted equipment or optional equipment where permitted and accepted, must conform to established space requirements within the project. Accepted substituted equipment which does not meet space requirements, shall be replaced at no additional expense to the Contract. All modifications of related systems as a result of substitutions shall be made at no additional expense to the Contract. Submit all modifications to the Engineer for acceptance. E. Samples: Samples shall be submitted for all electrical components, light fixtures, wiring devices, and other items deemed necessary by the Engineer to determine that the item meets all specifications and requirements before acceptance is allowed. Samples shall be submitted within 30 days after the award of the contract. 2.2 SHOP DRAWINGS A. General: Shop drawings shall be submitted for every item of equipment and material provided under this Division unless noted herein. An electronic email submission must be submitted to the Engineer Heartland Health Care Center of Zephyrhills-3181 16010-8 DE No 217032 38220 Henry Drive,Zephyrhills, FL 33542 Pending Emergency Rule 59A-4.1265