Laserfiche WebLink
SECTION 23 05 30—SUPPORTS,ANCHORS AND SEALS <br /> PART 1 -GENERAL <br /> 1.1 WORK INVOLVED <br /> A. Extent of supports, anchors, and seals required by this section is indicated on drawings and/or <br /> specified in other Division 23 sections. <br /> B. Types of supports, anchors, and seals specified in this section include the following: <br /> 1. Horizontal piping hangers and supports <br /> 2. Vertical piping clamps <br /> 3. Hanger rod attachments <br /> 4. Building attachments <br /> 5. Saddles and shields <br /> 6. Flashing materials <br /> 7. Miscellaneous materials <br /> 8. Anchors <br /> 9. Equipment bases <br /> C. Supports, anchors and seals furnished as part of factory-fabricated equipment are specified as <br /> part of the equipment assembly in other Division 23 sections. <br /> 1.2 RELATED WORK <br /> A. The Bidding Requirements and Contractual Conditions set forth in Division 01 apply to this <br /> section. <br /> 1.3 QUALITY ASSURANCE <br /> A. Manufacturers: Firms regularly engaged in the manufacture of supports, anchors and seals of <br /> types and sizes required, whose products have been in satisfactory use in similar service for not <br /> less than 5 years. <br /> B. MSS Standard Compliance: <br /> 1. Provide pipe hangers and supports of which materials, design and manufacture comply <br /> with ANSI/MSS SP-58. <br /> 2. Select and apply pipe hangers and supports, complying with MSS SP-69. Size hangers <br /> and supports to support pipe weight and fluid conveyed. <br /> 3. Fabricate and install pipe hangers and supports, complying with MSS SP-89. <br /> 4. Terminology used in this section is defined in MSS SP-90. <br /> 1.4 SUBMITTALS <br /> A. Product Data: Submit catalog cuts, specifications, installation instructions and dimensioned <br /> drawings for each type of support, anchor and seal. Include a schedule of supports, anchors and <br /> seals to be used. <br /> PART 2-PRODUCTS <br /> 2.1 HORIZONTAL PIPING HANGERS AND SUPPORTS <br /> CEA#18010 SUPPORTS,ANCHORS AND SEALS 23 05 30- 1 <br /> COPYRIGHT©2018 CONSULTING ENGINEERING ASSOCIATES, INC. <br />