Laserfiche WebLink
.ROCK-IT CLIP SS i n STa LL •arcenr�nlebtouelutglxa= � <br /> .-$ <br /> -21thfrom <br /> ienMon Roy <br /> a <br /> 1. Locate-all parts <br /> -Locate'the Rock It.Clip SS,micro-inverter/power optimizer;and-the section of the module.frame in which <br /> you.will be mounting.the micro-inverter/power optimizer. <br /> See fig.A for acceptable mounting locations. <br /> 2, Install the Rock-it Clip SS <br /> • Slide the.Rock4t Clip:SS onto the lip of the.module frame.. <br /> • Slide the micro-inverter/power optimizer into the opposite lip of the.Rock=.It Clip SS. <br /> - Tighten the bolt to-1 50 in-lb minumum to clamp.the Rock-it Clip SS to the module frame and the <br /> micro-inverter/power-optimizer to the Rock-it Clip SS. <br /> • .Ensure that the lip on the clip is tight against the frame and that the micro-inverter/power optimizer flange is <br /> tight against the:ciip flange to avoid rotation during tightening. <br /> ROCK-IT CLIP 2.o- inST8LL <br /> Inverter Flange <br /> Module Frame <br /> Rock-lt Clip 2.0 <br /> 1- Locate all parts <br /> -Locate the Rock-It.Clip 2.0,micro-inverter/power optimizer,and the section of the module frame in which you <br /> Will be mounting the micro-inverter/power optimizer. <br /> 2 Install the Rock-it Clip 10(See below detail) <br /> • Slide the Rock-it Clip 2.0 onto the lip of the micro-inverter%power optimizer. <br /> • Slide the,micro=inverter/power.optimizerdnto the opposite lip of the module frame. <br /> • Tighten the.bolt to 1.50 in-lb to clamp the Rock-It Clip 2.0 to the module frame and the micro-inverter/power <br /> optimizer to the Rock-it Clip 2.0. <br /> • Ensure that.the lip on the clip is tight.against the frame and that the micro-inverter/power optimizer.flange is <br /> tight against the clip flange to.avoid rotation during tightening. <br /> www.ecofastensolarcom info@ecofastensolarcom 877-859-3947 7 <br />