Laserfiche WebLink
INTERPLY ROOF MEMBRANE <br /> I <br /> PARADIENE 20 TG f Siplast® <br /> Commercial Product Data Sheet <br /> Product Description COMMERCIAL PRODUCT INFORMATION <br /> Paradiene 20 TG is a high performance torch grade modified Unit: Roll <br /> bitumen base ply designed for use in homogeneous multi-layer <br /> modified bitumen roof membrane systems. Paradiene 20 TG Coverage: 1.0 Square (9.3 m2) <br /> consists of a lightweight random fibrous glass mat impregnated <br /> and coated with high quality styrene-butadiene-styrene (SIBS) Coverage Weight <br /> modified bitumen. The top surface is covered With a silica Per Square: Min: 76 lb (3.7 kg/m') <br /> parting agent, and the back surface is coated with a high <br /> performance modified asphalt adhesive layer specifically Roll Length: Min: 33.5 ft (10.21 m) <br /> formulated for torch applications. The adhesive layer is <br /> manufactured using a special process that embosses the Roll Width: Avg: 3.28 ft (1.00 m) <br /> surface with a grooved pattern to provide optimum burnoff Of <br /> the plastic film and maximize application rates. Thickness: Avg: 114 mils (2.9 mm) <br /> Paradiene 20 TG is available with Siplast RoofTag RFID roof Min: 110mils (2.8 mm) <br /> asset technology on a Special-Made-To-Order basis. See Selvage Width: N/A <br /> Roofrag Commercial Product Data Sheet for more information. Selvage Surfacing: N/A <br /> Product Uses <br /> Paradiene 20 TG is the first ply of all Siplast Paradiene 20 Top Surfacing: Silica Parting Agent <br /> TG/30 TG Systems, and is lapped 3 inches (7.6 cm) side and Back Surfacing: Polyolefin Film <br /> end. Paradiene 20 TG is torch applied to approved substrates. <br /> Contact Siplast for specific approval on product uses. Lines: Two laying lines are placed 3 in(7.6 cm)and 4 in (10.2 <br /> Product Approvals cm) from each edge of the material. The line color for this <br /> Contact Siplast for specific information regarding FM Class 1 material is white. <br /> windstorm resistance classifications. <br /> Packaging: Rolls are wound onto a compressed paper tube. <br /> Paradiene 20 TG is classified by Underwriters Laboratories for The rails are placed upright on pallets cushioned with <br /> use in cULus Classified Siplast Paradiene 20 TGi30 TG and corrugated cardboard and are adhered with adhesive at the <br /> Paradiene 20 TG/30 FR TG Roof Systems. Siplast Paradiene labels, The top of the palleted rolls is covered with Kraft paper. <br /> 20 TG/30 FR TG Roof Systems have been classified by The palleted material is protected by a heat shrink <br /> Underwriters Laboratories as Class A roofing systems over polyethylene shroud. <br /> non-combustible, insulated non-combustible, and insulated <br /> combustible decks, and as Class B roofing systems over Pallet: 41 in X 48 in(104 cm X 122 cm)wooden pallet <br /> combustible decks, Siplast Paradiene 20 TG/30 TG Roof Number Rolls Per Pallet: 25 <br /> Systems have been classified as Class C roofing systems over Number Pallets Per Truckload: 18 <br /> combustible, non-combustible, and insulated combustible Minimum Roll Weight: 76 lb(34.5 kg) <br /> decks. <br /> Storage and Handling: All Siplast roll roofing products should <br /> Paradiene 20 TG meets or exceeds the requirements of ASTM be stored an end on a clean flat surface. Care should be taken <br /> D6163 Type 1, Grade S,and CSA All 23.23-15 Type A,Grade 1 that rolls are not dropped on ends or edges and are not stored <br /> for SBS-modified bituminous sheet materials using glass fiber in will <br /> leaning position. Deformation resulting from these actions <br /> reinforcements. will make proper installation difficult. All roofing should be <br /> stored in a dry place, out of direct exposure to the elements, <br /> Siplast Roof Systems have also received the approval of many and should not be double stacked. Material should be handled <br /> regional and local code authorities. Contact Siplast for more in such a manner as to ensure that it remains dry prior to and <br /> information. during installation. <br /> Current Copies Of all Siplast Commercial Product Data Sheets are <br /> posted on the Siplast Web site at www.SJp1asL corn. <br /> FIELD AND BASE-FLASHING INTERPLY Rev 6/2019 <br /> TORCH APPLIED TO COVER BOARD <br /> AND PARAPET WALLS <br /> Siplast 1000 Rochelle Blvd. 201 Bewicke Ave.,Suite 208 Customer Service In North America <br /> Irving,7X 75052-3940 North Vancouver,BC,Canada V7M 3M7 1.800.922.8800 www.siplast.com <br />