|
MILLWORK NOTES
<br />FINISH PLAN NOTES
<br />1. FINISHES
<br />1. BLOCKING
<br />NO PAINTING OR INTERIOR FINISHING SHALL BE DONE UNDER CONDITIONS WHICH WILL JEOPARDIZE THE QUALITY OR APPEARANCE OF SUCH WORK.
<br />ALL BLOCKING REQUIRED SHALL BE SCRIBED TO WALL OR CEILING, G.C. TO CHECK JOB PROGRESS AND COORDINATE WITH OTHER TRADES
<br />ALL WORKMANSHIP WHICH IS JUDGED LESS THAN FIRST QUALITY BY THE ARCHITECT WILL BE REJECTED.
<br />INVOLVED. G.C. IS RESPONSIBLE FOR ALL BLOCKING REQUIRED; UNDER NO CIRCUMSTANCES WILL "EXTRA" WORK BE AUTHORIZED FOR EXTRA
<br />BLOCKING.
<br />2. COLOR SELECTION
<br />HU
<br />ALL COLORS ARE TO BE SELECTED BY THE ARCHITECT, U.O.N.
<br />2. SHOP DRAWINGS
<br />THE G.C. SHALL SUBMIT SHOP DRAWINGS AND SAMPLES TO THE ARCHITECT FOR REVIEW.
<br />3. FINISH PREPARATION
<br />6.na.
<br />ALL SURFACES SHALL BE PREPARED TO RECEIVE THE SCHEDULED FINISH PER MANUFACTURERS' RECOMMENDATIONS. ALL GYPSUM BOARD
<br />3. FIELD CONDITIONS
<br />PARTITIONS SHALL BE TAPED AND SANDED SMOOTH. PAINT GRADE WOODWORK SHALL BE HAND SANDED BETWEEN COATS AND DUSTED CLEAN. ALL
<br />PRIOR TO THE START OF FABRICATION, THE G.C. SHALL CHECK AND VERIFY ALL DIMENSIONS AND CONDITIONS AT JOB SITE AND SHALL BE
<br />HOLES, PITCH POCKETS, OR SAPPY PORTIONS SHALL BE SCRAPED AND SEALED WITH KNOT SEALER. NAIL HOLES, CRACKS, OR DEFECTS SHALL BE
<br />RESPONSIBLE FOR SAME.
<br />PUTTIED AFTER FIRST COAT, WITH PUTTY MATCHING COLOR OF STAIN OR PAINT FINISH. REMOVE OIL OR GREASE WITH MINERAL SPIRITS.
<br />4. JOINERY
<br />ALL CRACKS, HOLES, IMPERFECTIONS IN EXISTING WALLS, PARTITIONS, OR GYPSUM WALLBOARD SHALL BE FILLED WITH PATCHING PLASTER AND
<br />WHERE MEMBERS ARE MITERED OR BUTTED, THEY SHALL BE JOINED AND SECURED IN A MANNER TO INSURE AGAINST THE JOINT OPENING.
<br />SMOOTHED OFF TO MATCH ADJOINING SURFACES.
<br />2017 - Humana
<br />5. FABRICATION
<br />INTERIOR GYPSUM WALLBOARD SURFACES SHALL BE WIPED WITH A DAMP CLOTH JUST PRIOR TO APPLICATION OF THE FIRST COAT, IN ORDER TO LAY
<br />ALL OF THE WORK SHALL BE FABRICATED, ASSEMBLED, FINISHED, AND ERECTED IN THE BEST METHOD KNOWN TO THE CABINET TRADE.
<br />FLAT ANY NAP WHICH MAY HAVE FORMED IN SANDING PROCESS.
<br />SURFACES SHALL BE TRUE, STRAIGHT, AND FREE FROM ALL MACHINE AND TOOLS MARKINGS, BRUISES, INDENTATIONS, CHIPS, OR ABRASIONS.
<br />Ze h rh i I I s Guidance
<br />WHERE APPLICABLE EXISTING PLASTER AND CONCRETE STRUCTURE SCHEDULED TO BE EXPOSED SHALL BE FINISHED TO PROVIDE A LEVEL 3 FINISH
<br />6. FIELD VERIFICATION
<br />IT SHALL BE THE G.C.'S RESPONSIBILITY TO HAVE EXAMINED THE JOB SITE IN CONJUNCTION WITH THE PROJECT DOCUMENTS SO AS TO BE
<br />LINO.
<br />Center
<br />SATISFIED AS TO THE CONDITIONS UNDER WHICH THE WORK WILL BE PERFORMED, INCLUDING SUCH MATTERS AS UNLOADING FACILITIES,
<br />4. WORK AREA CLEAN UP
<br />LOCATIONS AND SIZES OF ELEVATORS, EQUIPMENT, OR FACILITIES NEEDED PRELIMINARY TO AND DURING THE WORK, AND OTHER CONDITIONS
<br />UPON COMPLETION, REMOVE ALL PAINT FROM WHERE IT HAS SPILLED, SPLASHED, OR SPLATTERED ON EXPOSED SURFACES.
<br />WHICH MAY AFFECT THE WORK,
<br />5. STAINING VENEER
<br />7. PROTECTION
<br />ALL VENEER STAINS SHALL HAVE UNIFORM COLOR.
<br />THE G.C. SHALL MAINTAIN REASONABLE PROTECTION TO SAFEGUARD HIS WORK FROM DAMAGE AND TO PROTECT BUILDING OWNER'S
<br />PROPERTY FROM INJURY OR LOSS ARISING IN CONNECTION WITH ALL PROJECT WORK.
<br />6. TOUCH UP
<br />EXAMINE ALL FINISH SURFACES AFTER COMPLETION OF WORK, INCLUDING WOOD FLOORING AND MILLWORK INSTALLATION, AND PROCEED WITH
<br />7920 GALL BLVD.
<br />8. GUARANTEE
<br />"TOUCH-UP" AS REQUIRED.
<br />THE G.C. SHALL GUARANTEE THAT ALL MATERIALS AND WORKMANSHIP SHALL BE OF THE QUALITY SPECIFIED AND SHOWN AND THAT ANY
<br />DEFECT DUE TO IMPROPER WORKMANSHIP OR MATERIALS DISCOVERED AND MADE KNOWN WITHIN ONE YEAR FROM THE DATE OF
<br />7. FINISH APPROVAL
<br />ZE P HYR H I LLS, F L
<br />SUBSTANTIAL COMPLETION OF THE INSTALLATION SHALL BE REPAIRED OR REPLACED WITH REASONABLE PROMPTNESS WITHOUT ADDITIONAL
<br />PROVIDE ARCHITECT WITH A MINIMUM OF (3) 8" X 10" BRUSH -OUTS OF EACH COLOR AND FINISH FOR ARCHITECT'S APPROVAL AT LEAST 2 WEEKS PRIOR
<br />COST. ARCHITECT WILL GIVE NOTICE OF SUCH OBSERVED DEFECTS WITH REASONABLE PROMPTNESS.
<br />TO SITE APPLICATION. ON -SITE APPLICATION WILL BE REQUIRED ONE WEEK PRIOR TO FINAL APPROVAL. ARCHITECT RESERVES THE RIGHT TO ADJUST
<br />ANY COLOR/FINISH ONCE THE WALL TEST HAS BEEN MADE.
<br />33541
<br />9. INSTALLATION
<br />G.C. SHALL SHIM AND LEVEL COUNTERTOPS ABOVE FILES AFTER FILES ARE INSTALLED BY OTHERS. FILES IN OPERATIONS AREA TO BE
<br />PRIOR TO SITE APPLICATION, PROVIDE ARCHITECT WITH 8" X 10" SAMPLE CUTTINGS FROM ACTUAL DYE LOTS OF ALL SPECIFIED WALLCOVERINGS FOR
<br />SHIMMED AND SECURED TO MILLWORK AFTER THEY ARE SET IN PLACE, G.C. TO LEVEL FLOOR UNDER FILES IN ALL AREAS WHERE FILES ARE
<br />ARCHITECT'S APPROVAL AND PROVIDE EXPECTED DELIVERY DATE TO JOB SITE.
<br />GANGED OR INSTALLED BELOW FIXED CABINETRY. (PLASTIC LAMINATED SHIMS AS REQUIRED AT FILE CABINET AREA).
<br />8. SOFFITS
<br />10. FINISH
<br />UNDERSIDE OF SOFFITS (WHERE OCCURS) TO RECEIVE A FINISH TO MATCH ADJACENT VERTICAL FINISH, U.O.N.
<br />ALL MILLWORK SHALL RECEIVE FINAL FINISH AT THE SHOP OR FACTORY PRIOR TO DELIVERY. G.C. SHALL PROTECT ALL FINISHED AND
<br />INSTALLED MILLWORK FROM DAMAGE BY OTHER TRADES. DAMAGED OR DEFECTIVE MILLWORK SHALL BE REPLACED BY THE G.C. AT HIS
<br />9. DELIVERY LEAD TIME
<br />i
<br />EXPENSE.
<br />CONTRACTOR SHALL BE RESPONSIBLE FOR ALLOWING FOR DELIVERY LEAD TIMES FOR ALL FABRICS AND OTHER CUSTOM FINISHES WITHIN THE
<br />CONSTRUCTION SCHEDULE. ALL DELIVERY TIMES MUST BE CONFIRMED, AND ANY EXCESSIVE LEAD TIME MUST BE BROUGHT TO THE ARCHITECT'S
<br />r
<br />11. COORDINATION
<br />ATTENTION IMMEDIATELY TO ALLOW FOR RE -SPECIFICATION IF NECESSARY.,1�
<br />/
<br />MILLWORK CONTRACTOR TO COORDINATE LOCATION OF ELECTRICAL, TELEPHONE, AND COMMUNICATIONS OUTLETS AND INSTALL GROMMETS
<br />IN COUNTERTOP SURFACES AS REQUIRED TO CONCEAL CABLES.
<br />10. FLOOR SURFACE MODIFICATIONS
<br />MODIFY EXISTING FLOOR SURFACES AS REQUIRED TO INSTALL NEW FLOORING MATERIALS, THUS PREVENTING NOTICEABLE LUMPS OR DEPRESSIONS.
<br />12. SHELVING
<br />NO UNBRACED LENGTH OF SHELVING AND OR COUNTER WORK SHALL EXCEED 3-0" WITHOUT ADDITIONAL SUPPORTS AND OR BLOCKING. ALL
<br />11. FINISHES
<br />END CONDITIONS SHALL BE PROPERLY BLOCKED AND OR SUPPORTED.
<br />SEE FINISH PLAN, ELEVATIONS, AND DETAILS FOR CLARIFICATION OF EXTENT OF FINISH MATERIALS.
<br />13. OVERHEAD CABINETS
<br />12. JOINTS
<br />ALL BLOCKING AND WOOD CLEATS FOR OVERHEAD CABINETS TO BE SCREWED AND SECURED TO FULL HEIGHT OR BRACED CEILING HEIGHT
<br />STAINED AND PAINTED SURFACES SHALL BE FINISHED SUCH THAT JOINTS ARE NOT VISIBLE WHEN VIEWED FROM ANY REASONABLE ANGLE.
<br />GEORGE W. DE LA HOZ
<br />METAL STUDS AND WOOD GROUNDS.
<br />13. FLOOR FINISHES
<br />FL LICENSE #AR0016664
<br />14. WOOD ORIGINS:
<br />ALL INTERSECTIONS OF FLOOR FINISH MATERIALS SHALL BE LOCATED DIRECTLY UNDER CENTER OF DOOR, WHERE OCCURS, U.O.N.
<br />ALL WOOD UTILIZED ON THE JOB (SOLID LUMBER AND TIMBER PANEL PRODUCTS PLUS FINISHED WOOD) SHALL ORIGINATE FROM REGIONAL
<br />SOURCES AND FROM CERTIFIED AND SUSTAINABLE SOURCES (SUCH AS SUSTAINABLE FORESTRY INITIATIVE, CSA, FORESTRY STEWARDSHIP
<br />14. CABINETRY
<br />COUNCIL, OR AMERICAN TREE FARM SYSTEMS).
<br />ALL OPEN CABINETRY SHALL BE PLASTIC LAMINATE ON ALL EXPOSED SURFACES, U.O.N. APPLY WHITE MELAMINE TO INTERIOR OF CABINETRY WITH
<br />DOORS AND DRAWERS, U.O.N.
<br />15. ADHESIVES & SEALANTS:
<br />THE VOC CONTENT OF ADHESIVES AND SEALANTS USED SHALL BE LESS THAN THE CURRENT VOC CONTENT LIMITS OF SOUTH COAST AIR
<br />15. CARPET SEAMING PLAN
<br />QUALITY MANAGEMENT DISTRICT (SCAQMD) RULE #1168, AND ALL SEALANTS USED AS FILLERS SHALL MEET OR EXCEED THE REQUIREMENTS
<br />SUBMIT CARPET SEAMING PLAN TO ARCHITECT PRIOR TO ORDERING AND AT LEAST (4) WEEKS PRIOR TO INSTALLATION FOR ARCHITECT'S REVIEW AND
<br />OF THE BAY AREA AIR QUALITY MANAGEMENT DISTRICT REGULATION 8, RULE 51.
<br />APPROVAL.
<br />16. EXISTING FINISHES
<br />EXISTING FINISHES IN BUILDING SERVICE/CORE AREA TO REMAIN, U.O.N.
<br />17. WOOD ORIGINS:
<br />ALL WOOD UTILIZED ON THE JOB (SOLID LUMBER AND TIMBER PANEL PRODUCTS PLUS FINISHED WOOD) SHALL ORIGINATE FROM REGIONAL SOURCES
<br />AND FROM CERTIFIED AND SUSTAINABLE SOURCES (SUCH AS SUSTAINABLE FORESTRY INITIATIVE, CSA, FORESTRY STEWARDSHIP COUNCIL, OR
<br />AMERICAN TREE FARM SYSTEMS).
<br />18. ADHESIVES & SEALANTS:
<br />THE VOC CONTENT OF ADHESIVES AND SEALANTS USED SHALL BE LESS THAN THE CURRENT VOC CONTENT LIMITS OF SOUTH COAST AIR QUALITY
<br />MANAGEMENT DISTRICT (SCAQMD) RULE #1168, AND CALIFORNIA CODE OF REGULATIONS TITLE 17 FOR AEROSOL ADHESIVES (CALGREEN 5.504.4.1).
<br />ALL SEALANTS USED AS FILLERS MUST MEET OR EXCEED THE REQUIREMENTS OF THE BAY AREA AIR QUALITY MANAGEMENT DISTRICT REGULATION 8,
<br />RULE 51.DONE -
<br />19. PAINT:
<br />CONTRACTOR SHALL USE PAINT SPECIFIED BY ARCHITECT AND SHALL PROPERLY PREPARE ALL SURFACES TO RECEIVE ONE (1) PRIME COAT AND (2)
<br />FINISH COATS (MIN) OF PAINT IN COLOR SPECIFIED BY ARCHITECT." PROVIDE ADDITIONAL PREPARATION AND FINISH PAINT COATS AS REQUIRED BY
<br />1 3 ISSUE FOR CONSTRUCTION 04.18.2018
<br />PAINT MANUFACTURER. REFER TO SPECIFICATION FOR ADDITIONAL INFORMATION.
<br />20. PAINT MANUFACTURE TO BE AS INDICATED ON THE FINISH SCHEDULE - NO SUBSTITUTIONS U.O.N.
<br />Delta Issue Description Date
<br />21. EXTRA MATERIALS:
<br />r.
<br />FURNISH EXTRA MATERIALS DESCRIBED IN CONTRACT DOCUMENTS THAT ARE FROM THE SAME PRODUCTION RUN (BATCH MIX) AS MATERIALS APPLIED
<br />AND ARE PACKAGED FOR STORAGE, IDENTIFIED WITH LABELS DESCRIBING CONTENTS. STORE IN LOCATION MAINTAINING AN AMBIENT TEMPERATURE
<br />OF NOT LESS THAN 45 DEGREES F.
<br />-QUANTITY: FURNISH AN ADDITIONAL (5) PERCENT OF EACH MATERIAL AND COLOR SPECIFIED.
<br />I N T E R 10 R
<br />22. PAINTS AND COATINGS:
<br />1A
<br />PAINT TO COPLY WITH CODE OF R GULATIONS TITLE E 11MITS IN THE 7 FOR AEROSOL IPA PAURCES BOARD INTS (CALGREEN 5.504.4.31jURALCOATlNGS SUGGESTED CONTROL MEASURE AND CALIFORNIA
<br />ARCHITECTS, P.C.
<br />.
<br />23. CARPET:
<br />ALL CARPET MUST MEET ONE OF THE FOLLOWING:
<br />1. CARPET AND RUG INSTITUTE GREEN LABEL PLUS PROGRAM; 2. CALIFORNIA DEPARTMENT OF PUBLIC HEALTH STANDARD PRACTICE FOR TESTING OF
<br />VOCs (SPECIFICATION 01350); 3. NSF/ANSI 140 AT THE GOLD LEVEL; 4. SCIENTIFIC CERTIFICATIONS SYSTEMS SUSTAINABLE CHOICE; OR 5. CALIFORNIA
<br />COLLABORATIVE FOR HIGH PERFORMANCE SCHOOLS EQ 2.2 AND LISTED IN THE CHPS HIGH PERFORMANCE PRODUCT DATABASE.
<br />n ^ /�
<br />I Al
<br />1 V 1 1 �/ 1
<br />AND:
<br />CARPET CUSHION MUST MEET CARPET AND RUG INSTITUTE GREEN LABEL.
<br />INDOOR CARPET ADHESIVE AND CARPET PAD ADHESIVE MUST NOT EXCEED 50 G/L VOC CONTENT.
<br />2100 PONCE DE LEON BLVD
<br />24. COMPOSITE WOOD:
<br />SUITE 1 090
<br />COMPOSITE WOOD MUST MEET CARB AIR TOXICS CONTROL MEASURE FOR COMPOSITE WOOD INCLUDING MEETING THE EMISSIONS LIMITS IN
<br />CORAL GABLES, FLORIDA 33134
<br />CALGREEN TABLE 5.504.4.5.
<br />TEL 786-405-0230
<br />25. RESILIENT FLOORING SYSTEMS:
<br />FOR 80% OF FLOOR AREA RECEIVING RESILIENT FLOORING, INSTALL RESLIENT FLOORING COMPLYING WITH:
<br />1. CERTIFIED UNDER THE RESILIENT FLOOR COVERING INSTITUTE (RFCI) FLOORSCORE PROGRAM; 2. COMPLIANT WITH THE VOC-EMISSION LIMITS AND
<br />TESTING REQUIREMENTS OF CALIFORNIA DEPARTMENT OF PUBLIC HEALTH 2O10 STANDARD METHOD FOR TESTING AND EVALUATION CHAMBERS V.1.1;
<br />©2018 I N T E R 10 R A R C H I T E C T S P.C. LICENSE #AA26001062.
<br />3. COMPLIANT WITH THE COLLABORATIVE FOR HIGH PERFORMANCE SCHOOLS CHPS EQ2.2 AND LISTED IN THE CHIPS HIGH PERFORMANCE PRODUCT
<br />( )
<br />ALL DRAWINGS AND WRITTEN MATERIAL HERE IN CONSTITUTE THE
<br />ORIGINAL AND UNPUBLISHED WORK OF THE ARCHITECT, AND THE
<br />DATABASE, OR 4. CERTIFIED UNDER THE GREENGUARD CHILDREN AND SCHOOLS PROGRAM TO COMPLY WITH CALIFORNIA DEPARTMETN OF PUBLIC
<br />SAME MAY NOT BE DUPLICATED, USED, OR DISCLOSED WITHOUT THE
<br />HEALTH CRITERIA (CALGREEN 5.504.4.4 AND 5.504.4.6).
<br />WRITTEN CONSENT OF THE ARCHITECT.
<br />Drawn: TEAM Check: GWD Owner Approval:
<br />Job No:9900019.00 Scale: 1/8" = 1'-0"
<br />GENERAL NOTES
<br />Title:
<br />Sheet: ■
<br />
|