|
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES
<br />PART 1 GENERAL
<br />1.01 SECTION INCLUDES
<br />A.
<br />NON -FIRE -RATED STEEL DOORS AND FRAMES.
<br />B.
<br />STEEL FRAMES FOR WOOD DOORS.
<br />C.
<br />THERMALLY INSULATED STEEL DOORS.
<br />D.
<br />ACCESSORIES, INCLUDING GLAZING, LOUVERS, AND MATCHING
<br />PANELS.
<br />1.02 REFERENCES
<br />A.
<br />ANSI/ICC A117.1 - AMERICAN NATIONAL STANDARD FOR ACCESSIBLE
<br />AND USABLE BUILDINGS AND FACILITIES, INTERNATIONAL CODE
<br />COUNCIL, 1998.
<br />B.
<br />ANSI A250.8 - SDI-100 RECOMMENDED SPECIFICATIONS FOR
<br />STANDARD STEEL DOORS AND FRAMES, 1998.
<br />C.
<br />ANSI A250.10 - TEST PROCEDURE AND ACCEPTANCE CRITERIA FOR
<br />PRIME PAINTED STEEL SURFACES FOR STEEL DOORS AND FRAMES,
<br />1998.
<br />D.
<br />ASTM A 653/A 653M - STANDARD SPECIFICATION FOR STEEL SHEET,
<br />ZINC -COATED (GALVANIZED) OR ZINC -IRON ALLOY -COATED
<br />(GALVANNEALED) BY THE HOT -DIP PROCESS, 2002A
<br />E.
<br />ASTM C 236 - STANDARD TEST METHOD FOR STEADY-STATE
<br />THERMAL PERFORMANCE OF BUILDING ASSEMBLIES BY MEANS OF A
<br />GUARDED HOT BOX, 1989 (REAPPROVED 1993).
<br />F.
<br />ASTM C 1363 - STANDARD TEST METHOD FOR THERMAL
<br />PERFORMANCE OF BUILDING ASSEMBLIES BY MEANS OF A HOT BOX
<br />APPARATUS, 1997.
<br />G.
<br />DHI A115 SERIES - SPECIFICATIONS FOR STEEL DOORS AND FRAME
<br />PREPARATION FOR HARDWARE, DOOR AND HARDWARE INSTITUTE,
<br />CURRENT EDITION (ANSI/DHI A115 SERIES).
<br />H.
<br />NAAMM HMMA 840 - INSTALLATION AND STORAGE OF HOLLOW METAL
<br />DOORS AND FRAMES, THE NATIONAL ASSOCIATION OF
<br />ARCHITECTURAL METAL MANUFACTURERS, 1999.
<br />I.
<br />NAAMM HMMA 860 - GUIDE SPECIFICATIONS FOR HOLLOW METAL
<br />DOORS AND FRAMES, THE NATIONAL ASSOCIATION OF
<br />ARCHITECTURAL METAL MANUFACTURERS, 1992.
<br />J.
<br />NFPA 80 - STANDARD FOR FIRE DOORS AND FIRE WINDOWS,
<br />NATIONAL FIRE PROTECTION ASSOCIATION, 1999.
<br />K.
<br />NFPA 252 - STANDARD METHODS OF FIRE TESTS OF DOOR
<br />ASSEMBLIES, NATIONAL FIRE PROTECTION ASSOCIATION, 1999.
<br />L.
<br />UL (BMD) - BUILDING MATERIALS DIRECTORY, UNDERWRITERS
<br />LABORATORIES INC., CURRENT EDITION.
<br />1.03 QUALITY ASSURANCE
<br />A.
<br />MAINTAIN AT THE PROJECT SITE A COPY OF ALL REFERENCE
<br />STANDARDS DEALING WITH INSTALLATION.
<br />1.04 DELIVERY, STORAGE, AND PROTECTION
<br />A.
<br />STORE IN ACCORDANCE WITH NAAMM HMMA 840.
<br />B.
<br />PROTECT WITH RESILIENT PACKAGING, AVOID HUMIDITY BUILD-UP
<br />UNDER COVERINGS, PREVENT CORROSION.
<br />PART 2 PRODUCTS
<br />2.01 MANUFACTURERS
<br />A.
<br />STEEL DOORS AND FRAMES:
<br />1. STEELCRAFT, PRODUCT BF16: WWW.STEELCRAFT.COM.
<br />2. CECO DOOR PRODUCTS: WWW.CECODOOR.COM.
<br />3. REPUBLIC BUILDERS PRODUCTS:
<br />W W W. REPU BLICDOOR. COM.
<br />4. SUBSTITUTIONS: SEE SECTION 016000 - PRODUCT
<br />REQUIREMENTS.
<br />2.02 DOORS AND FRAMES
<br />A.
<br />REQUIREMENTS FOR ALL DOORS AND FRAMES:
<br />1. ACCESSIBILITY: COMPLY WITH ANSI/ICC A117.1.
<br />2. DOOR TOP CLOSURES: EXTERIOR DOORS SHALL BE FLUSH
<br />WITH TOP OF FACES AND EDGES.
<br />3. DOOR EDGE PROFILE: BEVELED ON BOTH EDGES.
<br />4. DOOR TEXTURE: SMOOTH FACES.
<br />5. HARDWARE PREPARATION: IN ACCORDANCE WITH DHI A115
<br />SERIES, WITH REINFORCEMENT WELDED IN PLACE, IN
<br />ADDITION TO OTHER REQUIREMENTS SPECIFIED IN DOOR
<br />GRADE STANDARD.
<br />6. GALVANIZING FOR EXTERIOR DOORS: ALL COMPONENTS
<br />HOT -DIPPED ZINC -IRON ALLOY -COATED (GALVANNEALED),
<br />MANUFACTURER'S STANDARD COATING THICKNESS.
<br />7. FINISH: FACTORY PRIMED, FOR FIELD FINISHING.
<br />B.
<br />COMBINED REQUIREMENTS: IF A PARTICULAR DOOR AND FRAME
<br />UNIT IS INDICATED TO COMPLY WITH MORE THAN ONE TYPE OF
<br />REQUIREMENT, COMPLY WITH ALL THE SPECIFIED REQUIREMENTS
<br />FOR EACH TYPE, FOR INSTANCE, AN EXTERIOR DOOR THAT IS ALSO
<br />INDICATED AS BEING SOUND -RATED MUST COMPLY WITH THE
<br />REQUIREMENTS SPECIFIED FOR EXTERIOR DOORS AND FOR
<br />SOUND -RATED DOORS, WHERE TWO REQUIREMENTS CONFLICT,
<br />COMPLY WITH THE MOST STRINGENT.
<br />2.03 STEEL DOORS
<br />A.
<br />EXTERIOR DOORS:
<br />1. GRADE: ANSI A250.8 LEVEL 3, MODEL 2, FULL FLUSH
<br />SEAMLESS.
<br />2. CORE: POLYURETHANE.
<br />3. TOP AND BOTTOM CLOSURES: FLUSH WITH FACES AND
<br />EDGES.
<br />4. GALVANIZING: ALL COMPONENTS HOT -DIPPED ZINC -IRON
<br />ALLOY -COATED (GALVANNEALED) IN ACCORDANCE WITH
<br />ASTM A 653/A 653M, WITH MANUFACTURER'S STANDARD
<br />COATING THICKNESS.
<br />5. TEXTURE: SMOOTH FACES.
<br />6. INSULATING VALUE: U-VALUE OF ,WHEN TESTED IN
<br />ACCORDANCE WITH ASTM C 1363.
<br />7. WEATHERSTRIPPING: SEPARATE, SEE SECTION 087100.
<br />8. FINISH: FACTORY PRIMED, FOR FIELD FINISHING.
<br />B.
<br />INTERIOR DOORS:
<br />1. GRADE: ANSI A250.8 LEVEL 2, MODEL 1, FLUSH.
<br />2. GRADE: NAAMM HMMA 860, PHYSICAL PERFORMANCE LEVEL
<br />A.
<br />3. CORE: STEEL STIFFENERS.
<br />4. THICKNESS: 1-3/4 INCHES (44 MM).
<br />5. TEXTURE: SMOOTH FACES.
<br />6. FINISH: FACTORY PRIMED, FOR FIELD FINISHING.
<br />C.
<br />PANELS: SAME CONSTRUCTION, PERFORMANCE, AND FINISH AS
<br />DOORS.
<br />2.04 STEEL FRAMES
<br />A.
<br />GENERAL:
<br />1. COMPLY WITH THE REQUIREMENTS OF GRADE SPECIFIED
<br />FOR CORRESPONDING DOOR.
<br />a. ANSI A250.8 LEVEL 2 DOORS: 16 GAGE FRAMES; LEVEL 3
<br />DOOR 16 GA.
<br />2. FINISH: SAME AS FOR DOOR.
<br />3. PROVIDE MORTAR GUARD BOXES FOR HARDWARE CUT-OUTS
<br />IN FRAMES TO BE INSTALLED IN MASONRY OR TO BE
<br />GROUTED.
<br />4. FRAMES IN MASONRY WALLS: SIZE TO SUIT MASONRY
<br />COURSING WITH HEAD MEMBER TO FILL OPENING WITHOUT
<br />CUTTING MASONRY UNITS.
<br />B.
<br />EXTERIOR DOOR FRAMES: FACE WELDED, SEAMLESS WITH JOINTS
<br />FILLED.
<br />1. GALVANIZING: ALL COMPONENTS HOT -DIPPED ZINC -IRON
<br />ALLOY -COATED (GALVANNEALED) IN ACCORDANCE WITH
<br />ASTM A 653/A 653M, WITH MANUFACTURER'S STANDARD
<br />COATING THICKNESS.
<br />2. WEATHERSTRIPPING: SEPARATE, SEE SECTION 087100.
<br />C. INTERIOR DOOR FRAMES, FIRE -RATED: DRYWALL SLIP-ON TYPE OR
<br />FACE WELDED AT MASONRY WALL CONSTRUCTION.
<br />1. FIRE RATING: SAME AS DOOR, LABELED.
<br />D. FRAMES FOR INTERIOR GLAZING OR BORROWED LIGHTS:
<br />CONSTRUCTION AND FACE DIMENSIONS TO MATCH DOOR FRAMES,
<br />AND AS INDICATED ON DRAWINGS.
<br />2.05 METAL GATE
<br />A. MANUFACTURER: iFENCE - INTEGRITY ALUMINUM PRODUCT
<br />1. 38-1/2" WIDE x 36" HIGH ARCHED SINGLE LEAF GATE WITH
<br />EVERBILT #276-490 SELF CLOSING HINGE.
<br />2. FLUSH BOTTOM RAIL, 5/8" VERTICAL PICKETS, 3-13/16' CLEAR
<br />BETWEEN PICKETS.
<br />3. MATTE BLACK FINISH.
<br />2.06 ACCESSORY MATERIALS
<br />A. LOUVERS: ROLL FORMED STEEL WITH OVERLAPPING FRAME,
<br />FACTORY -PAINTED FINISH, COLOR AS SELECTED,
<br />FACTORY -INSTALLED.
<br />1. IN FIRE -RATED DOORS: UL-LISTED FUSIBLE LINK LOUVER,
<br />SAME RATING AS DOOR.
<br />B. GROUT FOR FRAMES: PORTLAND CEMENT GROUT OF MAXIMUM
<br />4-INCH SLUMP FOR HAND TROWELING, THINNER PUMPABLE GROUT
<br />IS PROHIBITED.
<br />C. SILENCERS: RESILIENT RUBBER, FITTED INTO DRILLED HOLE, 3 ON
<br />STRIKE SIDE OF SINGLE DOOR, 3 ON CENTER MULLION OF PAIRS,
<br />AND 2 ON HEAD OF PAIRS WITHOUT CENTER MULLIONS.
<br />D. TEMPORARY FRAME SPREADERS: PROVIDE FOR ALL FACTORY- OR
<br />SHOP -ASSEMBLED FRAMES.
<br />2.07 FINISH MATERIALS
<br />A. PRIMER: RUST -INHIBITING, COMPLYING WITH ANSI A250.10, DOOR
<br />MANUFACTURER'S STANDARD.
<br />B. BITUMINOUS COATING: ASPHALT EMULSION OR OTHER HIGH -BUILD,
<br />WATER-RESISTANT, RESILIENT COATING.
<br />PART 3 EXECUTION
<br />3.01 EXAMINATION
<br />A. VERIFY EXISTING CONDITIONS BEFORE STARTING WORK.
<br />B. VERIFY THAT OPENING SIZES AND TOLERANCES ARE ACCEPTABLE.
<br />3.02 PREPARATION
<br />A. COAT INSIDE OF FRAMES TO BE INSTALLED IN MASONRY OR TO BE
<br />GROUTED, WITH BITUMINOUS COATING, PRIOR TO INSTALLATION.
<br />3.03 INSTALLATION
<br />A. INSTALL IN ACCORDANCE WITH THE REQUIREMENTS OF THE
<br />SPECIFIED DOOR GRADE STANDARD AND NAAMM HMMA 840.
<br />B. IN ADDITION, INSTALL FIRE RATED UNITS IN ACCORDANCE WITH
<br />NFPA 80.
<br />C. COORDINATE FRAME ANCHOR PLACEMENT WITH WALL
<br />CONSTRUCTION.
<br />D. GROUT FRAMES IN MASONRY CONSTRUCTION, USING HAND TROWEL
<br />METHODS, BRACE FRAMES SO THAT PRESSURE OF GROUT BEFORE
<br />SETTING WILL NOT DEFORM FRAMES. SET FOAM SPACERS BLOCK AT
<br />SILENCER HOLES.
<br />E. COORDINATE INSTALLATION OF HARDWARE.
<br />F. COORDINATE INSTALLATION OF GLAZING.
<br />3.04 ERECTION TOLERANCES
<br />A. CLEARANCES BETWEEN DOOR AND FRAME: AS SPECIFIED IN ANSI
<br />A250.8.
<br />B. MAXIMUM DIAGONAL DISTORTION: 1/16 IN (1.5 MM) MEASURED WITH
<br />STRAIGHT EDGE, CORNER TO CORNER.
<br />3.05 ADJUSTING
<br />A. ADJUST FOR SMOOTH AND BALANCED DOOR MOVEMENT.
<br />3.06 SCHEDULE
<br />A. REFER TO DOOR AND FRAME SCHEDULE ON THE DRAWINGS.
<br />END OF SECTION
<br />SECTION 081416 - FLUSH WOOD DOORS
<br />PART 1 GENERAL
<br />1.01 SECTION INCLUDES
<br />A. FLUSH WOOD DOORS, FLUSH CONFIGURATION, FIRE RATED AND
<br />NON -RATED.
<br />1.02 REFERENCES
<br />A. AWI (QSI) - ARCHITECTURAL WOODWORK QUALITY STANDARDS
<br />ILLUSTRATED, ARCHITECTURAL WOODWORK INSTITUTE, 1997,
<br />SEVENTH EDITION, VERSION 1.0.
<br />B. WDMA NWWDA I.S.1-A - ARCHITECTURAL WOOD FLUSH DOORS,
<br />WINDOW AND DOOR MANUFACTURERS ASSOCIATION (FORMERLY
<br />NWWDA), 1997.
<br />1.03 SUBMITTALS
<br />A. SEE SECTION 013000 -ADMINISTRATIVE REQUIREMENTS FOR
<br />SUBMITTAL PROCEDURES.
<br />B. PRODUCT DATA: INDICATE DOOR CORE MATERIALS AND
<br />CONSTRUCTION, VENEER SPECIES, TYPE AND CHARACTERISTICS.
<br />1.04 QUALITY ASSURANCE
<br />A. MANUFACTURER: COMPANY SPECIALIZING IN MANUFACTURING THE
<br />PRODUCTS SPECIFIED IN THIS SECTION WITH MINIMUM THREE
<br />YEARS OF DOCUMENTED EXPERIENCE.
<br />1.05 DELIVERY, STORAGE, AND PROTECTION
<br />A. PACKAGE, DELIVER AND STORE DOORS IN ACCORDANCE WITH
<br />SPECIFIED QUALITY STANDARD.
<br />B. ACCEPT DOORS ON SITE IN MANUFACTURER'S PACKAGING. INSPECT
<br />FOR DAMAGE.
<br />C. PROTECT DOORS WITH RESILIENT PACKAGING SEALED WITH HEAT
<br />SHRUNK PLASTIC. DO NOT STORE IN DAMP OR WET AREAS, OR IN
<br />AREAS WHERE SUNLIGHT MIGHT BLEACH VENEER. SEAL TOP AND
<br />BOTTOM EDGES WITH TINTED SEALER IF STORED MORE THAN ONE
<br />WEEK. BREAK SEAL ON SITE TO PERMIT VENTILATION.
<br />1.06 PROJECT CONDITIONS
<br />A. COORDINATE THE WORK WITH DOOR OPENING CONSTRUCTION,
<br />DOOR FRAME AND DOOR HARDWARE INSTALLATION.
<br />1.07 WARRANTY
<br />A. SEE SECTION 017700 - CLOSEOUT SUBMITTALS FOR ADDITIONAL
<br />WARRANTY REQUIREMENTS.
<br />B. PROVIDE WARRANTY FOR THE FOLLOWING TERM:
<br />1. INTERIOR DOORS: TWO (2) YEARS.
<br />C. INCLUDE COVERAGE FOR DELAMINATION OF VENEER, WARPING
<br />BEYOND SPECIFIED INSTALLATION TOLERANCES, DEFECTIVE
<br />MATERIALS, AND TELEGRAPHING CORE CONSTRUCTION
<br />PART 2 PRODUCTS
<br />2.01 DOORS AND PANELS
<br />A. ALL DOORS: SEE DRAWINGS FOR LOCATIONS AND ADDITIONAL
<br />REQUIREMENTS.
<br />1. QUALITY STANDARD: WDMA I.S. 1-A, ECONOMY GRADE.
<br />2. WOOD VENEER FACED DOORS: 5-PLY UNLESS OTHERWISE
<br />INDICATED.
<br />B. INTERIOR DOORS: 1-3/4 INCHES (44 MM) THICK UNLESS OTHERWISE
<br />INDICATED, FLUSH CONSTRUCTION.
<br />1. PROVIDE SOLID CORE DOORS AT ALL LOCATIONS EXCEPT
<br />PROVIDE HOLLOW CORE DOORS AT LOCATIONS INDICATED
<br />ON DRAWINGS.
<br />2.02 DOOR AND PANEL CORES
<br />A. NON -RATED SOLID CORE AND 20 MINUTE RATED DOORS: TYPE SLC,
<br />STAVED LUMBER CORE, PLIES AND FACES AS INDICATED ABOVE.
<br />B. HOLLOW CORE DOORS: TYPE SHC - STANDARD, PLIES AND FACES
<br />AS INDICATED ABOVE.
<br />2.03 DOOR FACINGS
<br />A. WOOD VENEER FACING FOR TRANSPARENT FINISH: NATURAL BIRCH,
<br />VENEER GRADE AS SPECIFIED BY QUALITY STANDARD, QUARTER
<br />SLICED, BOOK VENEER MATCH, RUNNING ASSEMBLY MATCH, UNLESS
<br />OTHERWISE INDICATED.
<br />1. VERTICAL EDGES: COMPATIBLE HARDWOOD.
<br />B. VENEER FACING FOR OPAQUE FINISH: MEDIUM DENSITY OVERLAID
<br />PLYWOOD.
<br />2.04 ACCESSORIES
<br />2.05 DOOR CONSTRUCTION
<br />A. FABRICATE DOORS IN ACCORDANCE WITH DOOR QUALITY
<br />STANDARD SPECIFIED.
<br />B. PROVIDE SOLID BLOCKS AT LOCK EDGE FOR HARDWARE
<br />REINFORCEMENT.
<br />C. FIT DOOR EDGE TRIM TO EDGE OF STILES AFTER APPLYING VENEER
<br />FACING.
<br />D. PROVIDE EDGE CLEARANCES IN ACCORDANCE WITH AWI QUALITY
<br />STANDARDS ILLUSTRATED SECTION 1700.
<br />2.06 FACTORY FINISHING
<br />PART 3 EXECUTION
<br />3.01 EXAMINATION
<br />A. VERIFY EXISTING CONDITIONS BEFORE STARTING WORK.
<br />B. VERIFY THAT OPENING SIZES AND TOLERANCES ARE ACCEPTABLE.
<br />C. DO NOT INSTALL DOORS IN FRAME OPENINGS THAT ARE NOT PLUMB
<br />OR ARE OUT -OF -TOLERANCE FOR SIZE OR ALIGNMENT.
<br />3.02 INSTALLATION
<br />A. INSTALL DOORS IN ACCORDANCE WITH MANUFACTURER'S
<br />INSTRUCTIONS AND SPECIFIED QUALITY STANDARD.
<br />B. TRIM NON -RATED DOOR WIDTH BY CUTTING EQUALLY ON BOTH JAMB
<br />EDGES.
<br />C. TRIM DOOR HEIGHT BY CUTTING BOTTOM EDGES TO A MAXIMUM OF
<br />3/4 INCH (19 MM).
<br />D. USE MACHINE TOOLS TO CUT OR DRILL FOR HARDWARE.
<br />E. COORDINATE INSTALLATION OF DOORS WITH INSTALLATION OF
<br />FRAMES AND HARDWARE.
<br />F. COORDINATE INSTALLATION OF GLAZING.
<br />G. INSTALL DOOR LOUVERS PLUMB AND LEVEL.
<br />3.03 INSTALLATION TOLERANCES
<br />A. CONFORM TO SPECIFIED QUALITY STANDARD FOR FIT AND
<br />CLEARANCE TOLERANCES.
<br />B. CONFORM TO SPECIFIED QUALITY STANDARD FOR MAXIMUM
<br />DIAGONAL DISTORTION.
<br />3.04 ADJUSTING
<br />A. ADJUST DOORS FOR SMOOTH AND BALANCED DOOR MOVEMENT.
<br />B. ADJUST CLOSERS FOR FULL CLOSURE.
<br />3.05 SCHEDULE - SEE DRAWINGS
<br />END OF SECTION
<br />SECTION 083613 - SECTIONAL DOORS
<br />PART 1 GENERAL
<br />1.01 SECTION INCLUDES
<br />A. STEEL SECTIONAL OVERHEAD DOORS.
<br />B. ELECTRIC OPERATORS AND CONTROLS.
<br />C. OPERATING HARDWARE, TRACKS, AND SUPPORT.
<br />1.02 REFERENCES
<br />A. ANSUDASMA 102 AMERICAN NATIONAL STANDARD SPECIFICATIONS
<br />FOR SECTIONAL OVERHEAD TYPE DOORS.
<br />1.03 SUBMITTALS
<br />A. SEE SECTION 013000 -ADMINISTRATIVE REQUIREMENTS, FOR
<br />SUBMITTAL PROCEDURES.
<br />B. PRODUCT DATA: MANUFACTURER'S DATA SHEETS ON EACH
<br />PRODUCT TO BE USED, INCLUDING:
<br />1. PREPARATION INSTRUCTIONS AND RECOMMENDATIONS.
<br />2. STORAGE AND HANDLING REQUIREMENTS AND
<br />RECOMMENDATIONS.
<br />3. INSTALLATION METHODS.
<br />C. SHOP DRAWINGS: INDICATE PLANS AND ELEVATIONS INCLUDING
<br />OPENING DIMENSIONS AND REQUIRED TOLERANCES, CONNECTION
<br />DETAILS, ANCHORAGE SPACING, HARDWARE LOCATIONS, AND
<br />INSTALLATION DETAILS.
<br />D. MANUFACTURER'S CERTIFICATES: CERTIFY PRODUCTS MEET OR
<br />EXCEED SPECIFIED REQUIREMENTS.
<br />E. OPERATION AND MAINTENANCE DATA.
<br />1.04 QUALITY ASSURANCE
<br />A. MANUFACTURER QUALIFICATIONS: COMPANY SPECIALIZING IN
<br />MANUFACTURING PRODUCTS SPECIFIED IN THIS SECTION WITH
<br />MINIMUM FIVE YEARS DOCUMENTED EXPERIENCE.
<br />B. INSTALLER QUALIFICATIONS: AUTHORIZED REPRESENTATIVE OF THE
<br />MANUFACTURER WITH MINIMUM FIVE YEARS DOCUMENTED
<br />EXPERIENCE.
<br />C. PRODUCTS REQUIRING ELECTRICAL CONNECTION: LISTED AND
<br />CLASSIFIED BY UNDERWRITERS LABORATORIES, INC. ACCEPTABLE
<br />TO AUTHORITY HAVING JURISDICTION AS SUITABLE FOR PURPOSE
<br />SPECIFIED.
<br />1.05 DELIVERY, STORAGE, AND HANDLING
<br />A. STORE PRODUCTS IN MANUFACTURER'S UNOPENED LABELED
<br />PACKAGING UNTIL READY FOR INSTALLATION.
<br />B. PROTECT MATERIALS FROM EXPOSURE TO MOISTURE UNTIL READY
<br />FOR INSTALLATION.
<br />C. STORE MATERIALS IN A DRY, VENTILATED WEATHERTIGHT LOCATION
<br />1.06 PROJECT CONDITIONS
<br />A. PRE -INSTALLATION CONFERENCE: CONVENE A PRE -INSTALLATION
<br />CONFERENCE JUST PRIOR TO COMMENCEMENT OF FIELD
<br />OPERATIONS, TO ESTABLISH PROCEDURES TO MAINTAIN OPTIMUM
<br />WORKING CONDITIONS AND TO COORDINATE THIS WORK WITH
<br />RELATED AND ADJACENT WORK.
<br />PART 2 PRODUCTS.
<br />2.01 MANUFACTURERS
<br />A. ACCEPTABLE MANUFACTURER: OVERHEAD DOOR CORP., 2501 S
<br />STATE HWY. 121, SUITE 200, LEWISVILLE, TX 75067. ASD. TEL TOLL
<br />FREE: (800) 275-3290. PHONE: (469) 549-7100. FAX: (972) 906-1499. WEB
<br />SITE: WWW.OVERHEADDOOR.COM E-MAIL:
<br />SALES@OVERHEADDOOR.COM
<br />B. REQUESTS FOR SUBSTITUTIONS WILL BE CONSIDERED IN
<br />ACCORDANCE WITH PROVISIONS OF SECTION 016000.
<br />2.02 SECTIONAL OVERHEAD DOORS
<br />A. SECTIONAL OVERHEAD STEEL DOORS: 418 SERIES STEEL DOORS BY
<br />OVERHEAD DOOR CORPORATION. UNITS SHALL HAVE THE
<br />FOLLOWING CHARACTERISTICS:
<br />1. DOOR ASSEMBLY: INSULATED STEEL DOOR ASSEMBLY WITH
<br />RABBETED MEETING RAILS TO FORM WEATHER TIGHT JOINTS
<br />AND PROVIDE FULL -WIDTH INTERLOCKING STRUCTURAL
<br />RIGIDITY.
<br />a. PANEL THICKNESS: 2 INCHES (51 MM).
<br />b. EXTERIOR SURFACE: FLUSH.
<br />c. THERMAL VALUES: R-VALUE OF 7.35; U-VALUE OF 0.17.
<br />d. SECTION MATERIAL: 16 GAUGE, GALVANIZED STEEL.
<br />e. CENTER AND END STILES: 16 GAUGE STEEL.
<br />f. SPRINGS:
<br />1.)10,000 CYCLES.
<br />2. LOCK:
<br />a. INTERIOR MOUNTED SLIDE LOCK.
<br />3. WEATHERSTRIPPING:
<br />a. FLEXIBLE BULB -TYPE STRIP AT BOTTOM SECTION.
<br />b. FLEXIBLE JAMB SEALS.
<br />c. FLEXIBLE HEADER SEAL.
<br />4. TRACK: PROVIDE TRACK AS RECOMMENDED BY
<br />MANUFACTURER TO SUIT LOADING REQUIRED AND
<br />CLEARANCES AVAILABLE.
<br />5. MANUAL OPERATION: PULL ROPE.
<br />6. ELECTRIC MOTOR OPERATION: PROVIDE UL LISTED ELECTRIC
<br />OPERATOR, SIZE AND TYPE AS RECOMMENDED BY
<br />MANUFACTURER TO MOVE DOOR IN EITHER DIRECTION AT
<br />NOT LESS THAN 2/3 FOOT NOR MORE THAN 1 FOOT PER
<br />SECOND. OPERATOR SHALL MEET UL325/2010
<br />REQUIREMENTS FOR CONTINUOUS MONITORING OF SAFETY
<br />DEVICES.
<br />a. ENTRAPMENT PROTECTION: REQUIRED FOR MOMENTARY
<br />CONTACT, INCLUDES RADIO CONTROL OPERATION.
<br />1.) PNEUMATIC SENSING EDGE UP TO 18 FEET
<br />(5.5 M) WIDE. CONSTANT CONTACT ONLY
<br />COMPLYING WITH UL 325/2010.
<br />2.) OPERATOR CONTROLS:
<br />PUSH-BUTTON AND KEY OPERATED CONTROL
<br />STATIONS WITH OPEN, CLOSE, AND STOP
<br />BUTTONS. SURFACE MOUNTING. INTERIOR
<br />LOCATION.
<br />PART 3 EXECUTION
<br />3.01 EXAMINATION
<br />A.
<br />DO NOT BEGIN INSTALLATION UNTIL OPENINGS HAVE BEEN
<br />PROPERLY PREPARED.
<br />B.
<br />VERIFY WALL OPENINGS ARE READY TO RECEIVE WORK AND
<br />OPENING DIMENSIONS AND TOLERANCES ARE WITHIN SPECIFIED
<br />LIMITS.
<br />C.
<br />VERIFY ELECTRICAL POWER IS AVAILABLE AND OF CORRECT
<br />CHARACTERISTICS.
<br />3.02 PREPARATION
<br />A.
<br />CLEAN SURFACES THOROUGHLY PRIOR TO INSTALLATION.
<br />B.
<br />PREPARE SURFACES USING THE METHODS RECOMMENDED BY THE
<br />MANUFACTURER FOR ACHIEVING THE BEST RESULTS FOR THE
<br />SUBSTRATE UNDER THE PROJECT CONDITIONS.
<br />3.03 INSTALLATION
<br />A.
<br />INSTALL OVERHEAD DOORS AND TRACK IN ACCORDANCE WITH
<br />APPROVED SHOP DRAWINGS AND THE MANUFACTURER'S PRINTED
<br />INSTRUCTIONS..
<br />B.
<br />COORDINATE INSTALLATION WITH ADJACENT WORK TO ENSURE
<br />PROPER CLEARANCES AND ALLOW FOR MAINTENANCE.
<br />C.
<br />ANCHOR ASSEMBLY TO WALL CONSTRUCTION AND BUILDING
<br />FRAMING WITHOUT DISTORTION OR STRESS.
<br />D.
<br />SECURELY BRACE DOOR TRACKS SUSPENDED FROM STRUCTURE.
<br />SECURE TRACKS TO STRUCTURAL MEMBERS ONLY.
<br />E.
<br />FIT AND ALIGN DOOR ASSEMBLY INCLUDING HARDWARE.
<br />F.
<br />COORDINATE INSTALLATION OF ELECTRICAL SERVICE. COMPLETE
<br />POWER AND CONTROLS WIRING FROM DISCONNECT TO UNIT
<br />COMPONENTS..
<br />3.04 CLEANING AND ADJUSTING
<br />A.
<br />ADJUST DOORS ASSEMBLY TO SMOOTH OPERATION AND IN FULL
<br />CONTACT WITH WEATHERSTRIPPING.
<br />B.
<br />CLEAN DOORS, FRAMES AND GLASS.
<br />C.
<br />REMOVE TEMPORARY LABELS AND VISIBLE MARKINGS.
<br />3.05 PROTECTION OF FINISHED WORK
<br />A.
<br />DO NOT PERMIT CONSTRUCTION TRAFFIC THROUGH OVERHEAD
<br />DOOR OPENINGS AFTER ADJUSTMENT AND CLEANING.
<br />B.
<br />PROTECT INSTALLED PRODUCTS UNTIL COMPLETION OF PROJECT.
<br />C.
<br />TOUCH-UP DAMAGED COATINGS AND FINISHES AND REPAIR DAMAGE
<br />BEFORE SUBSTANTIAL COMPLETION.
<br />END OF SECTION
<br />SECTION 084113 - ALUMINUM -FRAMED ENTRANCES AND STOREFRONTS
<br />PART 1 GENERAL
<br />1.01 SECTION INCLUDES
<br />A.
<br />ALUMINUM -FRAMED STOREFRONT, WITH VISION GLASS.
<br />B.
<br />WEATHERSTRIPPING.
<br />C.
<br />PERIMETER SEALANT.
<br />1.02 RELATED SECTIONS
<br />A.
<br />SECTION 079200 - JOINT SEALERS: PERIMETER SEALANT AND
<br />BACK-UP MATERIALS.
<br />B.
<br />SECTION 088000 - GLAZING: GLASS AND GLAZING ACCESSORIES.
<br />1.03 REFERENCES
<br />A.
<br />AA DAF-45 - DESIGNATION SYSTEM FOR ALUMINUM FINISHES, THE
<br />ALUMINUM ASSOCIATION, INC., 2003.
<br />B.
<br />AAMA CW-10 - CARE AND HANDLING OF ARCHITECTURAL ALUMINUM
<br />FROM SHOP TO SITE, AMERICAN ARCHITECTURAL MANUFACTURERS
<br />ASSOCIATION, 1997.
<br />C.
<br />AAMA 611 - VOLUNTARY SPECIFICATION FOR ANODIZED
<br />ARCHITECTURAL ALUMINUM, AMERICAN ARCHITECTURAL
<br />MANUFACTURERS ASSOCIATION, 1998.
<br />D.
<br />ASTM B 221 - STANDARD SPECIFICATION FOR ALUMINUM AND
<br />ALUMINUM -ALLOY EXTRUDED BARS, RODS, WIRE, PROFILES, AND
<br />TUBES, 2002.
<br />E.
<br />ASTM B 221 M - STANDARD SPECIFICATION FOR ALUMINUM AND
<br />ALUMINUM -ALLOY EXTRUDED BARS, RODS, WIRE, PROFILES, AND
<br />TUBES (METRIC), 2002.
<br />1.04 SUBMITTALS
<br />A.
<br />SEE SECTION 013000 -ADMINISTRATIVE REQUIREMENTS, FOR
<br />SUBMITTAL PROCEDURES.
<br />B.
<br />PRODUCT DATA: PROVIDE COMPONENT DIMENSIONS, DESCRIBE
<br />COMPONENTS WITHIN ASSEMBLY, ANCHORAGE AND FASTENERS,
<br />GLASS AND INFILL, DOOR HARDWARE, INTERNAL DRAINAGE DETAILS.
<br />C.
<br />SHOP DRAWINGS: INDICATE SYSTEM DIMENSIONS, FRAMED
<br />OPENING REQUIREMENTS AND TOLERANCES, AFFECTED RELATED
<br />WORK, EXPANSION AND CONTRACTION JOINT LOCATION AND
<br />DETAILS, AND FIELD WELDING REQUIRED.
<br />D.
<br />WARRANTY: SUBMIT MANUFACTURER WARRANTY AND ENSURE
<br />FORMS HAVE BEEN COMPLETED IN DEVELOPERS DIVERSIFIED'S
<br />NAME AND REGISTERED WITH MANUFACTURER.
<br />1.05 DELIVERY, STORAGE, AND PROTECTION
<br />A.
<br />HANDLE PRODUCTS OF THIS SECTION IN ACCORDANCE WITH AAMA
<br />CW-10.
<br />B.
<br />PROTECT FINISHED ALUMINUM SURFACES WITH WRAPPING. DO NOT
<br />USE ADHESIVE PAPERS OR SPRAYED COATINGS WHICH BOND TO
<br />ALUMINUM WHEN EXPOSED TO SUNLIGHT OR WEATHER.
<br />1.06 PROJECT CONDITIONS
<br />A. COORDINATE THE WORK WITH INSTALLATION OF FIRESTOPPING
<br />COMPONENTS OR MATERIALS.
<br />1.07 WARRANTY
<br />A. SEE SECTION 017700 - CLOSEOUT SUBMITTALS, FOR ADDITIONAL
<br />WARRANTY REQUIREMENTS.
<br />B. PROVIDE FIVE YEAR MANUFACTURER WARRANTY AGAINST FAILURE
<br />OF GLASS SEAL ON INSULATING GLASS UNITS, INCLUDING
<br />INTERPANE DUSTING OR MISTING. INCLUDE PROVISION FOR
<br />REPLACEMENT OF FAILED UNITS.
<br />C. PROVIDE FIVE YEAR MANUFACTURER WARRANTY AGAINST
<br />EXCESSIVE DEGRADATION OF EXTERIOR FINISH. INCLUDE
<br />PROVISION FOR REPLACEMENT OF UNITS WITH EXCESSIVE FADING,
<br />CHALKING, OR FLAKING.
<br />PART 2 PRODUCTS
<br />2.01 MANUFACTURERS
<br />A. ACCEPTABLE MANUFACTURERS - STOREFRONT SYSTEM:
<br />1. KAWNEER COMPANY, INC, PRODUCT TRI-FAB VG- 451T AT
<br />EXTERIOR AND TRI-FAB 450 FOR INTERIOR APPLICATIONS:
<br />WWW.KAWNEER.COM.
<br />2. UNITED STATES ALUMINUM CORP: WWW.USALUM.COM.
<br />3. VISTAWALL ARCHITECTURAL PRODUCTS:
<br />WWW.VISTAWALL.COM.
<br />4. SUBSTITUTIONS: SEE SECTION 016000 - PRODUCT
<br />REQUIREMENTS.
<br />2.02 COMPONENTS
<br />A. ALUMINUM -FRAMED STOREFRONT: FACTORY FABRICATED,
<br />FACTORY FINISHED ALUMINUM FRAMING MEMBERS WITH INFILL, AND
<br />RELATED FLASHINGS, ANCHORAGE AND ATTACHMENT DEVICES.
<br />1. FINISH: CLASS I COLOR ANODIZED AT INTERIOR, OR TO
<br />MATCH EXISTING FINISH AS INDICATED ON DRAWINGS.
<br />2.03 MATERIALS
<br />A. EXTRUDED ALUMINUM: ASTM B 221 (ASTM B 221 M).
<br />B. FASTENERS: STAINLESS STEEL.
<br />C. EXPOSED FLASHINGS: 0.032 INCH (0.8 MM) THICK ALUMINUM SHEET,
<br />FINISH TO MATCH FRAMING MEMBERS.
<br />D. CONCEALED FLASHINGS: 0.018 INCH (0.5 MM) THICK GALVANIZED
<br />STEEL.
<br />E. PERIMETER SEALANT: TYPE SPECIFIED IN SECTION 079200.
<br />F. GLASS: AS SPECIFIED IN SECTION 088000.
<br />1. GLASS IN EXTERIOR FRAMING: TYPE INSULATED UNITS.
<br />2.04 FINISHES
<br />A.
<br />COMPLY WITH AA DAF-45 FOR ALUMINUM FINISHES REQUIRED.
<br />B.
<br />CLASS I COLOR ANODIZED FINISH: ANODIC COATING TO MATCH
<br />EXISTING, NOT LESS THAN 0.7 MILS (0.018 MM) THICK.
<br />C.
<br />TOUCH-UP MATERIALS: AS RECOMMENDED BY COATING
<br />MANUFACTURER FOR FIELD APPLICATION.
<br />2.05 HARDWARE
<br />2.06 FABRICATION
<br />A.
<br />FABRICATE COMPONENTS WITH MINIMUM CLEARANCES AND SHIM
<br />SPACING AROUND PERIMETER OF ASSEMBLY, YET ENABLING
<br />INSTALLATION AND DYNAMIC MOVEMENT OF PERIMETER SEAL.
<br />B.
<br />ACCURATELY FIT AND SECURE JOINTS AND CORNERS. MAKE JOINTS
<br />FLUSH, HAIRLINE, AND WEATHERPROOF.
<br />C.
<br />PREPARE COMPONENTS TO RECEIVE ANCHOR DEVICES. FABRICATE
<br />ANCHORS.
<br />D.
<br />COAT CONCEALED METAL SURFACES THAT WILL BE IN CONTACT
<br />WITH CEMENTITIOUS MATERIALS OR DISSIMILAR METALS WITH
<br />BITUMINOUS PAINT.
<br />E.
<br />ARRANGE FASTENERS AND ATTACHMENTS TO CONCEAL FROM VIEW.
<br />F.
<br />REINFORCE FRAMING MEMBERS FOR IMPOSED LOADS.
<br />G.
<br />FINISHING: APPLY FACTORY FINISH TO ALL SURFACES THAT WILL BE
<br />EXPOSED IN COMPLETED ASSEMBLIES.
<br />PART 3 EXECUTION
<br />3.01 EXAMINATION
<br />A.
<br />VERIFY DIMENSIONS, TOLERANCES, AND METHOD OF ATTACHMENT
<br />WITH OTHER WORK.
<br />B.
<br />VERIFY THAT WALL OPENINGS AND ADJOINING AIR AND VAPOR SEAL
<br />MATERIALS ARE READY TO RECEIVE WORK OF THIS SECTION.
<br />3.02 INSTALLATION
<br />A.
<br />INSTALL WALL SYSTEM IN ACCORDANCE WITH MANUFACTURER'S
<br />INSTRUCTIONS.
<br />B.
<br />ATTACH TO STRUCTURE TO PERMIT SUFFICIENT ADJUSTMENT TO
<br />ACCOMMODATE CONSTRUCTION TOLERANCES AND OTHER
<br />IRREGULARITIES.
<br />C.
<br />PROVIDE ALIGNMENT ATTACHMENTS AND SHIMS TO PERMANENTLY
<br />FASTEN SYSTEM TO BUILDING STRUCTURE.
<br />D.
<br />ALIGN ASSEMBLY PLUMB AND LEVEL, FREE OF WARP OR TWIST.
<br />MAINTAIN ASSEMBLY DIMENSIONAL TOLERANCES, ALIGNING WITH
<br />ADJACENT WORK.
<br />E.
<br />PROVIDE THERMAL ISOLATION WHERE COMPONENTS PENETRATE
<br />OR DISRUPT BUILDING INSULATION.
<br />F.
<br />INSTALL SILL FLASHINGS. TURN UP ENDS AND EDGES, SEAL TO
<br />ADJACENT WORK TO FORM WATER TIGHT DAM.
<br />G.
<br />COORDINATE ATTACHMENT AND SEAL OF PERIMETER AIR AND
<br />VAPOR BARRIER MATERIALS.
<br />H.
<br />PACK FIBROUS INSULATION IN SHIM SPACES AT PERIMETER OF
<br />ASSEMBLY TO MAINTAIN CONTINUITY OF THERMAL BARRIER.
<br />1.
<br />INSTALL HARDWARE USING TEMPLATES PROVIDED.
<br />J.
<br />INSTALL GLASS IN ACCORDANCE WITH SECTION 088000, USING
<br />GLAZING METHOD REQUIRED TO ACHIEVE PERFORMANCE CRITERIA.
<br />K.
<br />INSTALL PERIMETER SEALANT IN ACCORDANCE WITH SECTION
<br />079200.
<br />3.03 ERECTION TOLERANCES
<br />A.
<br />MAXIMUM VARIATION FROM PLUMB: 0.06 INCHES EVERY 3 FT (1.5
<br />MM/M) NON -CUMULATIVE OR 1/16 INCHES PER 10 FT (1.5 MM/3 M),
<br />WHICHEVER IS LESS.
<br />B.
<br />MAXIMUM MISALIGNMENT OF TWO ADJOINING MEMBERS ABUTTING
<br />IN PLANE: 1/32 INCH (0.8 MM).
<br />3.04 ADJUSTING
<br />A.
<br />ADJUST OPERATING HARDWARE FOR SMOOTH OPERATION.
<br />3.05 CLEANING AND PROTECTION
<br />A.
<br />REMOVE PROTECTIVE MATERIAL FROM PRE -FINISHED ALUMINUM
<br />SURFACES.
<br />B.
<br />WASH DOWN SURFACES WITH A SOLUTION OF MILD DETERGENT IN
<br />WARM WATER, APPLIED WITH SOFT, CLEAN WIPING CLOTHS. TAKE
<br />CARE TO REMOVE DIRT FROM CORNERS. WIPE SURFACES CLEAN.
<br />C.
<br />REMOVE EXCESS SEALANT BY METHOD ACCEPTABLE TO SEALANT
<br />MANUFACTURER.
<br />D.
<br />TOUCH-UP MINOR DAMAGE TO FACTORY APPLIED FINISH, REPLACE
<br />COMPONENTS THAT CANNOT BE SATISFACTORILY REPAIRED.
<br />E.
<br />PROTECT FINISHED WORK FROM DAMAGE.
<br />END OF SECTION
<br />O
<br />H
<br />a
<br />U
<br />W
<br />W
<br />Q
<br />0
<br />W
<br />ISSUED FOR:
<br />PERMIT
<br />03.14.19
<br />BID
<br />03.14.19
<br />CONSTRUCTION
<br />00.00.00
<br />REVIEW SET
<br />03.14.19
<br />JOB NO.
<br />18390
<br />AS1 m4
<br />
|