|
SECTION 084229 -AUTOMATIC ENTRANCES
<br />PART 1
<br />1.01 SECTION INCLUDES
<br />A. SLIDING AUTOMATIC ENTRANCES
<br />1.02 RELATED SECTIONS
<br />A. DIVISION 7 FOR CAULKING
<br />B. DIVISION 8 FOR DOOR HARDWARE
<br />C. DIVISION 26 FOR ELECTRICAL CONNECTIONS
<br />1.03 REFERENCES
<br />A. UL 325 - STANDARD FOR DOOR, DRAPERY, GATE,LIOUVER, AND
<br />WINDOW OPERATORS AND SYSTEMS
<br />B. ANSI/BMHA Al56.10: STANDARD FOR POWER OPERATED PEDESTRIAN
<br />DOORS
<br />C. ANSI/BMHA A156.5: STANDARD FOR AUXILIARY LOCKS AND
<br />ASSOCIATED PRODUCTS
<br />D. ANSI Z97.1: STANDARDS FOR SAFETY GLAZING MATERIALS USED IN
<br />BUILDINGS - SAFETY PERFORMANCE SPECIFICATIONS AND METHODS
<br />E. CPSC 16 CFR 1201: SAFETY STANDARD FOR ARCHITECTURAL
<br />GLAZING MATERIALS
<br />F. ASTM B221 - STANDARD SPECIFICATION FOR ALUMINUM EXTRUDED
<br />BARS, RODS, WIRE, PROFILES, AND TUBES
<br />G. ASTM B209 - STANDARD SPECIFICATION FOR ALUMINUM SHEET AND
<br />PLATE
<br />H. AAMA 611 -VOLUNTARY SPECIFICATION FOR ANODIZED
<br />ARCHITECTURAL ALUMINUM, AMERICAN ARCHITECTURAL
<br />MANUFACTURERS ASSOCIATION, 1998
<br />I. AAMA 701 - VOLUNTARY SPECIFICATION FOR PILE
<br />WEATHERSTRIPPING AND REPLACEABLE FENESTRATION
<br />WEATHERSEALS
<br />1.04 SUBMITTALS
<br />A. SHOP DRAWINGS: INCLUDE PLANS, ELEVATIONS, SECTIONS,
<br />DETAILS, HARDWARE MOUNTING HEIGHTS, AND ATTACHMENTS TO
<br />OTHER WORK.
<br />B. COLOR SAMPLES FOR SELECTION OF FCATORY-APPLIED COLOR
<br />FINISHES.
<br />C. CLOSEOUT SUBMITTALS: OWNER'S MANUAL AND WARRANTIES
<br />1.05 WARRANTY
<br />A. AUTOMATIC ENTRANCES SHALL BE FREE OF DEFECTS IN MATERIAL
<br />AND WORKMANSHIP FOR A PERIOD OF ONE (1) YEAR FROM DATE OF
<br />SUBSTANTIAL COMPLETION.
<br />PART 2 PRODUCTS
<br />2.01 AUTOMATIC ENTRANCES
<br />A. MANUFACTURER: RECORD AUTOMATIC DOOR SYSTEMS
<br />(RECORD -USA): SERIES 5100 SIZE: AS INDICATED ON DRAWINGS.
<br />BI-PART DOOR PACKAGE
<br />B. SUBSTITUTIONS: SEE DIVISION 1 FOR SUBSTITUTION PROCEDURES
<br />2.02 MATERIALS
<br />A. ALUMINUM
<br />A.A. HEADERS, STILES, RAILS AND FRAMES: 6063-T6
<br />A.B. EXTRUDED BARS, RODS, PROFILES AND TUBES: ASTM B 221
<br />A.C. SHEET AND PLATE: ASTM B 209
<br />B. SEALANTS AND JOINT FILLERS: SEE DIVISION 7 SECTION JOINT
<br />SEALANTS
<br />2.03 COMPONENTS
<br />A. FRAMING AND TENSION MEMBERS: NOMINAL SIZE 1 3/4" X 4 1/2" WITH
<br />CONCEALED FASTENERS. TRANSOM SHALL BE INTEGRAL TO SLIDING
<br />DOOR FRAMING SYSTEM WITH FLUSH GLAZING.
<br />B. STILE AND RAIL DOORS AND SIDELIGHTS: 1 3/4" THICK GLAZED
<br />DOORS WITH EXTRUDED ALUMINUM TUBULAR STILE AND RAIL
<br />MEMBERS. SNAP ON GLAZING STOPS AND GASKETS. 2" NOMINAL
<br />WIDTH NARROW STILE. MINIMUM 10" NOMINAL HEIGHT ON BOTTOM
<br />RAIL DESIGN. HORIZONTAL TUBULAR RAIL MEMBER FOR EACH DOOR,
<br />2" NOMINAL WIDTH
<br />C. GLAZING: 1" CLEAR IG ON EXTERIOR DOOR PACKAGE, 1/4" CLEAR
<br />TEMP ON INTERIOR DOOR PACKAGE.
<br />D. HEADERS: CONCEALED MOUNTING WITH ONE SIDE OF HEADER
<br />FLUSH WITH FRAMING. CAPABLE OF SUPPORTING UP TO 220 LBS PER
<br />PANEL, UP TO 4 PANELS, OVER SPANS OF 14 FEET WITHOUT
<br />INTERMEDIATE SUPPORTS
<br />E. CARRIER ASSEMBLIES AND OVERHEAD ROLLER TRACKS:
<br />MANUFACTURER'S STANDARD CARRIER PACKAGE
<br />F. THRESHOLDS: CONTINUOUS STANDARD TAPERED EXTRUSION
<br />DOUBLE BEVEL
<br />G. FASTENERS: STANDARD CORROSION RESISTANT, NON -STAINING,
<br />NON -BLEEDING
<br />2.04 ELECTRICAL CONTROLS
<br />A. MICROPROCESSOR CONTROLLER AND POSITION ENCODER WITH
<br />SAFETY LOGIC AND WATCHDOG LED
<br />2.05 ACTIVATION AND SAFETY DEVICES
<br />A. DUAL ACTIVATION STANLEY SU-100 MOTION SENSOR SHALL BE
<br />MOUNTED ON EACH SIDE OF THE DOOR HEADER
<br />B. STAN GUARD THRESHOLD SAFETY SENSORS SHALL BE PROVIDED
<br />C. PHOTO -ELECTRONIC BEAMS SHALL BE PULSED INFRARED TYPE
<br />2.06 HARDWARE
<br />A. EMERGENCY BREAKAWAY RELEASE SHALL ALLOW BOTH PANELS TO
<br />SWING OUT 90 DEGREES
<br />B. DEADLOCKS: 2-POINT LOCKING, KEY EXTERIOR, THUMB TURN
<br />INTERIOR
<br />C. CONTROL SWITCH: ROTARY SWITCH MOUNTED ON THE INTERIOR
<br />JAMB
<br />2.07 ALUMINUM FINISH
<br />A. TO MATCH EXISTING STOREFRONT FINISH
<br />PART 3 EXECUTION
<br />3.01 INSPECTION
<br />A. EXAMINE EXISTING CONDITIONS FOR COMPLIANCE WITH
<br />REQUIREMENTS FOR INSTALLATION TOLERANCES, HEADER
<br />SUPPORT AND OTHER CONDITIONS AFFECTING PERFORMANCE OF
<br />AUTOMATIC ENTRANCES.
<br />3.02 INSTALLATION
<br />A. DO NOT INSTALL DAMAGED COMPONENTS
<br />B. INSTALL ENTRANCES PLUMB AND TRUE IN ALIGNMENT. ANCHOR
<br />SECURELY IN PLACE.
<br />C. DOOR OPERATORS: CONNECT DOOR OPERATORS TO ELECTRICAL
<br />POWER DISTRIBUTION SYSTEM
<br />D. GLAZING: PER MANUFACTURER'S INSTRUCTIONS
<br />E. SEALANTS: PER DIVISION 7 SECTION JOINT SEALANTS
<br />3.03 FIELD QUALITY CONTROL
<br />A. TESTING SERVICES: FACTORY TRAINED INSTALLER SHALL TEST AND
<br />INSPECT EACH DOOR FOR FULL COMPLIANCE.
<br />3.04 ADJUSTING
<br />A. ADJUST DOOR OPERATORS, CONTROLS, AND HARDWARE FOR
<br />SMOOTH AND SAFE OPERATION.
<br />3.05 CLEANING AND PROTECTION
<br />A. CLEAN GLASS AND ALUMINUM SURFACES PROMPTLY AFTER
<br />INSTALLATION.
<br />END OF SECTION
<br />SECTION 085113 - ALUMINUM WINDOWS
<br />1.01 QUALITY ASSURANCE
<br />A. MOCKUPS FOR EACH FORM OF CONSTRUCTION.
<br />1.02 WARRANTY
<br />A. WINDOWS: 10 YEARS FROM DATE OF SUBSTANTIAL COMPLETION.
<br />B. GLAZING UNITS: 10 YEARS FROM DATE OF SUBSTANTIAL
<br />COMPLETION.
<br />C. ALUMINUM FINISH: 10 YEARS FROM DATE OF SUBSTANTIAL
<br />COMPLETION.
<br />1.03 WINDOW PERFORMANCE REQUIREMENTS
<br />A. PRODUCT STANDARD: AAMA / WDMA / CSA 101 / I.S.2 / A440.
<br />B. CONDENSATION -RESISTANCE FACTOR: 52 COMPLYING WITH
<br />AAMA 1503.
<br />C. SOUND TRANSMISSION CLASS: 26 MINIMUM.
<br />1.04 ALUMINUM WINDOWS
<br />A. FRAMES AND SASHES: NON -THERMAL ALUMINUM EXTRUSIONS.
<br />B. GLAZING:
<br />1. GLASS: CLEAR
<br />C. GLAZING SYSTEM: MANUFACTURER'S STANDARD
<br />D. ACCESSORIES: INTEGRAL VENTILATING SYSTEM/DEVICE
<br />E. ALUMINUM FINISH: TO MATCH EXISTING STOREFRONT].
<br />1.05 FIELD QUALITY CONTROL
<br />A. TESTING: BY CONTRACTOR -ENGAGED AGENCY.
<br />END OF SECTION
<br />SECTION 087100 - DOOR HARDWARE
<br />PART1 GENERAL
<br />1.01 SECTION INCLUDES
<br />A. HARDWARE FOR HOLLOW STEEL AND WOOD DOORS.
<br />B. LOCK CYLINDERS FOR DOORS FOR WHICH HARDWARE IS SPECIFIED
<br />IN OTHER SECTIONS.
<br />C. THRESHOLDS.
<br />D. WEATHERSTRIPPING, SEALS AND'DOOR GASKETS.
<br />1.02 REFERENCES
<br />A. DHI (LOCS) - RECOMMENDED LOCATIONS FOR ARCHITECTURAL
<br />HARDWARE FOR STANDARD STEEL DOORS AND FRAMES, DOOR AND
<br />HARDWARE INSTITUTE, 2001.
<br />B. NFPA 101 - CODE FOR SAFETY TO LIFE FROM FIRE IN BUILDINGS AND
<br />STRUCTURES, NATIONAL FIRE PROTECTION ASSOCIATION, 2000.
<br />1.03 QUALITY ASSURANCE
<br />1.04 DELIVERY, STORAGE, AND PROTECTION
<br />A. PACKAGE HARDWARE ITEMS INDIVIDUALLY, LABEL AND IDENTIFY
<br />EACH PACKAGE WITH DOOR OPENING CODE TO MATCH HARDWARE
<br />SCHEDULE.
<br />1.05 COORDINATION
<br />A. COORDINATE THE WORK WITH OTHER DIRECTLY AFFECTED
<br />SECTIONS INVOLVING MANUFACTURE OR FABRICATION OF INTERNAL
<br />REINFORCEMENT FOR DOOR HARDWARE.
<br />B. FURNISH TEMPLATES FOR DOOR AND FRAME PREPARATION.
<br />C. SEQUENCE INSTALLATION TO ENSURE UTILITY CONNECTIONS ARE
<br />ACHIEVED IN AN ORDERLY AND EXPEDITIOUS MANNER.
<br />D. COORDINATE THE OWNER'S KEYING REQUIREMENTS DURING THE
<br />COURSE OF THE WORK.
<br />1.06 WARRANTY
<br />A. SEE SECTION 017700 -CLOSEOUT SUBMITTALS, FOR ADDITIONAL
<br />WARRANTY REQUIREMENTS.
<br />1.07 MAINTENANCE PRODUCTS
<br />A. PROVIDE SPECIAL WRENCHES AND TOOLS APPLICABLE TO EACH
<br />DIFFERENT OR SPECIAL HARDWARE COMPONENT.
<br />B. PROVIDE MAINTENANCE TOOLS AND ACCESSORIES SUPPLIED BY
<br />HARDWARE COMPONENT MANUFACTURER.
<br />PART 2 PRODUCTS
<br />2.01 REFER TO DRAWINGS FOR SCHEDULES AND SPECIFICATIONS.
<br />2.02 GENERAL REQUIREMENTS FOR DOOR HARDWARE PRODUCTS
<br />A. PROVIDE PRODUCTS THAT COMPLY WITH THE FOLLOWING:
<br />1. APPLICABLE PROVISIONS OF FEDERAL, STATE, AND LOCAL
<br />CODES.
<br />2. APPLICABLE PROVISIONS OF NFPA 101, LIFE SAFETY CODE.
<br />B. FINISHES: IDENTIFIED IN SCHEDULE.
<br />PART 3 EXECUTION
<br />3.01 EXAMINATION
<br />A. VERIFY THAT DOORS AND FRAMES ARE READY TO RECEIVE WORK
<br />AND DIMENSIONS ARE AS INSTRUCTED BY THE MANUFACTURER.
<br />3.02 INSTALLATION
<br />A. INSTALL HARDWARE IN ACCORDANCE WITH MANUFACTURER'S
<br />INSTRUCTIONS AND APPLICABLE CODES.
<br />B. USE TEMPLATES PROVIDED BY HARDWARE ITEM MANUFACTURER.
<br />C. MOUNTING HEIGHTS FOR HARDWARE FROM FINISHED FLOOR TO
<br />CENTER LINE OF HARDWARE ITEM:
<br />1. FOR STEEL DOORS AND FRAMES: COMPLY WITH DHI
<br />"RECOMMENDED LOCATIONS FOR ARCHITECTURAL HARDWARE
<br />FOR STEEL DOORS AND FRAMES."
<br />3.03 ADJUSTING
<br />A. ADJUST WORK UNDER PROVISIONS OF SECTION 017700.
<br />B. ADJUST HARDWARE FOR SMOOTH OPERATION.
<br />3.04 PROTECTION OF FINISHED WORK
<br />A. PROTECT FINISHED WORK UNDER PROVISIONS OF SECTION 017700.
<br />B. DO NOT PERMIT ADJACENT WORK TO DAMAGE HARDWARE OR
<br />FINISH.
<br />END OF SECTION
<br />SECTION 088000 - GLAZING
<br />PART1 GENERAL
<br />1.01 SECTION
<br />INCLUDES
<br />A.
<br />GLASS AND PLASTIC GLAZING.
<br />B.
<br />GLAZING COMPOUNDS AND ACCESSORIES.
<br />C.
<br />MONOLITHIC CERAMIC ENAMEL FRIT SPANDREL GLASS, CERAMIC
<br />ENAMEL FRIT SPANDREL GLASS IN INSULATING GLASS (IG) UNITS
<br />1.02 RELATED SECTIONS
<br />A.
<br />SECTION 079200 - JOINT SEALERS: SEALANT AND BACK-UP
<br />MATERIAL.
<br />B.
<br />SECTION 081113 - HOLLOW METAL DOORS AND FRAMES: GLAZED
<br />DOORS AND BORROWED LITES.
<br />C.
<br />SECTION 084113 - ALUMINUM -FRAMED STOREFRONTS.
<br />1.03 REFERENCES
<br />A.
<br />ANSI Z97.1 - AMERICAN NATIONAL STANDARD FOR SAFETY GLAZING
<br />MATERIALS USED IN BUILDINGS, SAFETY PERFORMANCE
<br />SPECIFICATIONS AND METHODS OF TEST, 1984 (R1994).
<br />B.
<br />ASTM C162 - STANDARD TERMINOLOGY OF GLASS AND GLASS
<br />PRODUCTS.
<br />C.
<br />ASTM C 1036 - STANDARD SPECIFICATION FOR FLAT GLASS, 2001.
<br />D.
<br />ASTM C1048 - STANDARD SPECIFICATION FOR HEAT -TREATED FLAT
<br />GLASS - KIND HS, KIND FT COATED AND UNCOATED GLASS.
<br />E.
<br />ASTM C 1193 - STANDARD GUIDE FOR USE OF JOINT SEALANTS, 2000.
<br />F.
<br />ASTM E2188 - STANDARD TEST METHOD FOR INSULATING GLASS
<br />UNIT PERFORMANCE.
<br />G.
<br />ASTM E2189 - STANDARD TEST METHOD FOR TESTING RESISTANCE
<br />TO FOGGING IN INSULATING GLASS UNITS.
<br />H.
<br />ASTM E2190 - STANDARD SPECIFICATION FOR INSULATING GLASS
<br />UNIT PERFORMANCE AND EVALUATION.
<br />I.
<br />ASTM E1300 - STANDARD PRACTICE FOR DETERMINING THE MINIMUM
<br />THICKNESS AND TYPE OF GLASS REQUIRED TO RESIST A SPECIFIED
<br />LOAD.
<br />J.
<br />ASTM E2188 - STANDARD TEST METHOD FOR INSULATING GLASS
<br />UNIT PERFORMANCE.
<br />K.
<br />ASTM E2189 - STANDARD TEST METHOD FOR TESTING RESISTANCE
<br />TO FOGGING IN INSULATING GLASS UNITS.
<br />L.
<br />ASTM E2190 - STANDARD SPECIFICATION FOR INSULATING GLASS
<br />UNIT PERFORMANCE AND EVALUATION.
<br />M.
<br />GANA (GM) - GANA GLAZING MANUAL, GLASS ASSOCIATION OF
<br />NORTH AMERICA, 1997.
<br />N.
<br />GANA (SM) - FGMA SEALANT MANUAL, GLASS ASSOCIATION OF
<br />NORTH AMERICA, 1990.
<br />1.04 QUALITY ASSURANCE
<br />A.
<br />PERFORM WORK IN ACCORDANCE WITH GANA GLAZING MANUAL
<br />AND FGMA SEALANT MANUAL FOR GLAZING INSTALLATION METHODS.
<br />B.
<br />INSTALLER QUALIFICATIONS: COMPANY SPECIALIZING IN
<br />PERFORMING THE WORK OF THIS SECTION WITH MINIMUM 5 YEARS
<br />DOCUMENTED EXPERIENCE.
<br />C.
<br />SAFETY GLASS PRODUCTS IN THE US ARE TO COMPLY WITH CPSC 16
<br />CFR PART 1201 FOR CATEGORY II MATERIALS.
<br />D.
<br />INSULATING GLASS PRODUCTS ARE TO BE PERMANENTLY MARKED
<br />EITHER ON SPACERS OR AT LEAST ONE INSULATING UNIT
<br />COMPONENT WITH APPROPRIATE CERTIFICATION LABEL OF
<br />INSPECTING AND TESTING AGENCY INDICATED BELOW:
<br />1. US - INSULATING GLASS CERTIFICATION COUNCIL (IGCC)
<br />1.05 ENVIRONMENTAL REQUIREMENTS
<br />A.
<br />DO NOT INSTALL GLAZING WHEN AMBIENT TEMPERATURE IS LESS
<br />THAN 50 DEGREES F (10 DEGREES C).
<br />B.
<br />MAINTAIN MINIMUM AMBIENT TEMPERATURE BEFORE, DURING AND
<br />24 HOURS AFTER INSTALLATION OF GLAZING COMPOUNDS.
<br />1.06 WARRANTY
<br />A.
<br />SEE SECTION 017700 - CLOSEOUT SUBMITTALS, FOR ADDITIONAL
<br />WARRANTY REQUIREMENTS.
<br />B.
<br />PROVIDE A FIVE (5) YEAR WARRANTY TO INCLUDE COVERAGE FOR
<br />SEALED GLASS UNITS FROM SEAL FAILURE, INTERPANE DUSTING OR
<br />MISTING, AND REPLACEMENT OF SAME.
<br />PART 2 PRODUCTS
<br />2.01 FLAT GLASS MATERIALS
<br />A.
<br />MANUFACTURERS:
<br />1. AFG INDUSTRIES, INC: WWW.AFGGLASS.COM.
<br />2. GUARDIAN INDUSTRIES CORPORATION: WWW.GUARDIAN.COM.
<br />3. PPG INDUSTRIES, INC: WWW.PPG.COM.
<br />4. OLDCASTLE BUILDINGENVELOPEO
<br />5. SUBSTITUTIONS: REFER TO SECTION 016000 - PRODUCT
<br />REQUIREMENTS.
<br />B.
<br />CLEAR FLOAT GLASS: CLEAR, HEAT STRENGTHENED.
<br />1. COMPLY WITH ASTM C 1048, TYPE I, TRANSPARENT FLAT,
<br />CLASS 1 CLEAR, QUALITY Q3 (GLAZING SELECT).
<br />C.
<br />SAFETY GLASS: CLEAR, FULLY TEMPERED WITH HORIZONTAL
<br />TEMPERING.
<br />1. COMPLY WITH ANSI Z97.1.
<br />2.02 SEALED INSULATING GLASS MATERIALS
<br />A.
<br />MANUFACTURERS:
<br />1. GUARDIAN INDUSTRIES CORPORATION: WWW.GUARDIAN.COM.
<br />2. PPG INDUSTRIES, INC. WWW.PPGGLAZING.COM
<br />3. SUBSTITUTIONS: REFER TO SECTION 016000 - PRODUCT
<br />REQUIREMENTS.
<br />B.
<br />INSULATED GLASS UNITS: DOUBLE PANE WITH GLASS TO
<br />ELASTOMER EDGE SEAL.
<br />1. OUTER PANE OF FLOAT GLASS, INNER PANE OF FLOAT GLASS.
<br />2. TOTAL UNIT THICKNESS OF 1 INCH.
<br />3. PROVIDE SAFETY GLASS AS INDICATED.
<br />C.
<br />EDGE SEAL CONSTRUCTION: ALUMINUM, BENT AND SOLDERED
<br />CORNERS.
<br />D.
<br />EDGE SEAL MATERIAL: BLACK COLOR.
<br />2.03 SEALED INSULATING GLASS (IG) UNITS WITH CERAMIC ENAMEL FRIT
<br />SPANDREL INBOARD LITE
<br />1. INSULATING GLASS UNIT MAKEUP
<br />2. GLASS TINT: TO BE SELECTED
<br />3. NOMINAL THICKNESS: TO MATCH EXISTING
<br />2.04 GLAZING ACCESSORIES
<br />A.
<br />PRODUCTS IN COMPLIANCE WITH ASTM C920 AND REFERENCED
<br />GLAZING STANDARDS, THE REQUIREMENTS OF THE GLASS AND
<br />STOREFRONT MANUFACTURERS AND PROVEN TRACK RECORD TO
<br />BE COMPATABLE WITH ONE ANOTHER AND WITH THE MATERIALS
<br />THEY WILL COME IN CONTACT WITH.
<br />1. COMPRESSION GASKETS: AS REQUIRED FOR SPECIFED
<br />ALUMINIUM STOREFRONT AND DOOR SYSTEMS.
<br />2. SUBSTITUTIONS: REFER TO SECTION 016000 - PRODUCT
<br />REQUIREMENTS.
<br />PART 3 EXECUTION
<br />3.01 EXAMINATION
<br />A.
<br />VERIFY THAT OPENINGS FOR GLAZING ARE CORRECTLY SIZED AND
<br />WITHIN TOLERANCE.
<br />B.
<br />VERIFY THAT SURFACES OF GLAZING CHANNELS OR RECESSES ARE
<br />CLEAN, FREE OF OBSTRUCTIONS THAT MAY IMPEDE MOISTURE
<br />MOVEMENT, WEEPS ARE CLEAR, AND READY TO RECEIVE GLAZING.
<br />3.02 PREPARATION
<br />A.
<br />CLEAN CONTACT SURFACES WITH SOLVENT AND WIPE DRY.
<br />B.
<br />SEAL POROUS GLAZING CHANNELS OR RECESSES WITH SUBSTRATE
<br />COMPATIBLE PRIMER OR SEALER.
<br />C.
<br />PRIME SURFACES SCHEDULED TO RECEIVE SEALANT.
<br />D.
<br />INSTALL SEALANTS IN ACCORDANCE WITH ASTM C 1193 AND FGMA
<br />SEALANT MANUAL.
<br />E.
<br />INSTALL SEALANT IN ACCORDANCE WITH MANUFACTURER'S
<br />INSTRUCTIONS.
<br />F.
<br />PROTECT GLASS EDGES DURING HANDLING AND INSTALLATION.
<br />G.
<br />DO NOTEXCEED EDGE PRESSURES SPECIFIED BY GLASS
<br />MANUFACTURER FOR INSTALLING GLASS LITES.
<br />H.
<br />SET GLASS LITES IN SERIES WITH UNIFORM DRAW, BOW AND
<br />SIMILAR CHARACTERISTICS.
<br />I.
<br />COMPLY WITH MANUFACTURER'S WRITTEN INSTRUCTIONS FOR
<br />GLASS, SEALANTS, GASKETS AND OTHER GLAZING MATERIALS.
<br />3.03 CLEANING
<br />A.
<br />REMOVE GLAZING MATERIALS FROM FINISH SURFACES.
<br />B.
<br />REMOVE LABELS AFTER WORK IS COMPLETE.
<br />C.
<br />CLEAN GLASS AND ADJACENT SURFACES.
<br />3.04 PROTECTION OF FINISHED WORK
<br />A.
<br />AFTER INSTALLATION, MARK PANE WITH AN 'X' BY USING REMOVABLE
<br />PLASTIC TAPE OR PASTE.
<br />END OF SECTION
<br />SECTION 088720 - ARCHITECTURAL WINDOW FILM
<br />PART1 GENERAL
<br />1.01 SECTION INCLUDES
<br />A. INTERIOR WINDOW FILM
<br />B. DECORATIVE WINDOW FILM.
<br />C. PRIVACY WINDOW FILM.
<br />1.02 PERFORMANCE REQUIREMENTS
<br />A.
<br />FIRE PERFORMANCE: SURFACE BURNING CHARACTERISTICS WHEN
<br />TESTED IN ACCORDANCE WITH ASTM E 84:
<br />1. FLAME SPREAD: 25, MAXIMUM
<br />2. SMOKE DEVELOPED: 450, MAXIMUM.
<br />1.05 PROJECT CONDITIONS
<br />A.
<br />MAINTAIN ENVIRONMENTAL CONDITIONS (TEMPERATURE, HUMIDITY,
<br />AND VENTILATION) WITHIN LIMITS RECOMMENDED BY
<br />MANUFACTURER FOR OPTIMUM RESULTS. DO NOT INSTALL
<br />PRODUCTS UNDER ENVIRONMENTAL CONDITIONS OUTSIDE
<br />MANUFACTURER'S ABSOLUTE LIMITS.
<br />PART 2 PRODUCTS
<br />2.01 WINDOW FILM
<br />A.
<br />MANUFACTURERS:
<br />1. 3M
<br />2. HANITA TEK WINDOW FILMS
<br />B.
<br />COLOR: FROSTED.
<br />PART 3 EXECUTION
<br />3.01 EXAMINATION
<br />A.
<br />DO NOT BEGIN INSULATION UNTIL SUBSTRATES HAVE BEEN
<br />PROPERLY PREPARED.
<br />3.02 PREPARATION
<br />A.
<br />CLEAN SURFACES THOROUGHLY PRIOR TO INSTALLATION.
<br />B.
<br />PREPARE SURFACES USING THE METHODS RECOMMENDED BY THE
<br />MANUFACTURER FOR ACHIEVING THE BEST RESULT FOR THE
<br />SUBSTRATE UNDER THE PROJECT CONDITIONS.
<br />3.04 INSULATION
<br />A.
<br />INSTALL IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS.
<br />B.
<br />CUT FILM EDGES NEATLY AND SQUARE AT A UNIFORM DISTANCE OF
<br />1/8 INCH (3 MM) TO 1/16 INCH (1.5 MM) OF WINDOW SEALANT. USE
<br />NEW BLADE TIPS AFTER 3 TO 4 CUTS.
<br />C.
<br />SPRAY THE SLIP SOLUTION, COMPOSED OF ONE CAPFUL OF BABY
<br />SHAMPOO OR DISHWASHING LIQUID TO 1 GALLON OF WATER, ON
<br />WINDOW GLASS AND ADHESIVE TO FACILITATE PROPER
<br />POSITIONING OF FILM.
<br />D.
<br />APPLY FILM TO GLASS AND LIGHTLY SPRAY FILM WITH SLIP
<br />SOLUTION.
<br />E.
<br />SQUEEGEE FROM TOP TO BOTTOM OF WINDOW. SPRAY SLIP
<br />SOLUTION TO FILM AND SQUEEGEE A SECOND TIME.
<br />F.
<br />BUMP FILM EDGE WITH LINT -FREE TOWEL WRAPPED AROUND EDGE
<br />OF A 5-WAY TOOL.
<br />G.
<br />UPON COMPLETION OF FILM APPLICATION, ALLOW 30 DAYS FOR
<br />MOISTURE FROM FILM INSTALLATION TO DRY THOROUGHLY, AND TO
<br />ALLOW FILM TO DRY FLAT WITH NO MOISTURE DIMPLES WHEN
<br />VIEWED UNDER NORMAL VIEWING CONDITIONS
<br />3.05 CLEAN AND PROTECTION
<br />A.
<br />REMOVE LEFT OVER MATERIAL AND DEBRIS FROM WORK AREA. USE
<br />NECESSARY MEANS TO PROTECT FILM BEFORE, DURING, AND AFTER
<br />INSTALLATION.
<br />B.
<br />TOUCH-UP, REPAIR OR REPLACE DAMAGED PRODUCTS BEFORE
<br />SUBSTANTIAL COMPLETION.
<br />C.
<br />AFTER APPLICATION OF FILM, WASH FILM USING COMMON WINDOW
<br />CLEANING SOLUTIONS, INCLUDING AMMONIA SOLUTIONS, 30 DAYS
<br />AFTER APPLICATION. DO NOT USE ABRASIVE TYPE CLEANING
<br />AGENTS AND BRISTLE BRUSHES TO AVOID SCRATCHING FILM. USE
<br />SYNTHETIC SPONGES OR SOFT CLOTHS.
<br />END OF SECTION
<br />SECTION 092900 - GYPSUM BOARD ASSEMBLIES
<br />PART1 GENERAL
<br />1.01 SECTION
<br />INCLUDES
<br />A.
<br />METAL STUD WALL FRAMING.
<br />B.
<br />METAL CHANNEL CEILING FRAMING.
<br />C.
<br />ACOUSTIC INSULATION.
<br />D.
<br />GYPSUM SHEATHING.
<br />E.
<br />GYPSUM WALLBOARD.
<br />F.
<br />JOINT TREATMENT AND ACCESSORIES.
<br />1.02 REFERENCES
<br />A.
<br />ASTM C 36/C 36M - STANDARD SPECIFICATION FOR GYPSUM
<br />WALLBOARD, 2001.
<br />B.
<br />ASTM C 79/C 79M - STANDARD SPECIFICATION FOR TREATED CORE
<br />AND NONTREATED CORE GYPSUM SHEATHING BOARD, 2001.
<br />C.
<br />ASTM C 475/C 475M - STANDARD SPECIFICATION FOR JOINT
<br />COMPOUND AND JOINT TAPE FOR FINISHING GYPSUM BOARD, 2002.
<br />D.
<br />ASTM C 630/C 630M - STANDARD SPECIFICATION FOR
<br />WATER-RESISTANT GYPSUM BACKING BOARD, 2000.
<br />E.
<br />ASTM C 645 - STANDARD SPECIFICATION FOR NONSTRUCTURAL
<br />STEEL FRAMING MEMBERS, 2000.
<br />F.
<br />ASTM C 665 - STANDARD SPECIFICATION FOR MINERAL -FIBER
<br />BLANKET THERMAL INSULATION FOR LIGHT FRAME CONSTRUCTION
<br />AND MANUFACTURED HOUSING, 2001.
<br />G.
<br />ASTM C 754 - STANDARD SPECIFICATION FOR INSTALLATION OF
<br />STEEL FRAMING MEMBERS TO RECEIVE SCREW -ATTACHED GYPSUM
<br />PANEL PRODUCTS, 2000.
<br />H.
<br />ASTM C 840 - STANDARD SPECIFICATION FOR APPLICATION AND
<br />FINISHING OF GYPSUM BOARD, 2002.
<br />I.
<br />ASTM C 1002 - STANDARD SPECIFICATION FOR STEEL SELF -PIERCING
<br />TAPPING SCREWS FOR THE APPLICATION OF GYPSUM PANEL
<br />PRODUCTS OR METAL PLASTER BASES TO WOOD STUDS OR STEEL
<br />STUDS, 2001.
<br />1.03 QUALITY ASSURANCE
<br />A.
<br />PERFORM IN ACCORDANCE WITH ASTM C 840.
<br />PART 2 PRODUCTS
<br />2.01 METAL FRAMING MATERIALS
<br />A.
<br />NON-LOADBEARING FRAMING SYSTEM COMPONENTS: ASTM C 645,
<br />GALVANIZED SHEET STEEL, OF SIZE AND PROPERTIES NECESSARY
<br />TO COMPLY WITH ASTM C 754 FOR THE SPACING INDICATED, WITH
<br />MAXIMUM DEFLECTION OF WALL FRAMING OF U240 AT 5 PSF (240 PA).
<br />1. STUDS: C SHAPED WITH KNURLED FACES.
<br />2. RUNNERS: U SHAPED, SIZED TO MATCH STUDS.
<br />3. CEILING CHANNELS: C SHAPED.
<br />B.
<br />CEILING HANGERS: TYPE AND SIZE AS SPECIFIED IN ASTM C 754 FOR
<br />SPACING REQUIRED.
<br />C.
<br />PARTITION HEAD TO STRUCTURE CONNECTIONS: PROVIDE TRACK
<br />FASTENED TO STRUCTURE WITH LEGS OF SUFFICIENT LENGTH TO
<br />ACCOMMODATE DEFLECTION, FOR FRICTION FIT OF STUDS CUT
<br />SHORT AND FASTENED AS INDICATED ON DRAWINGS.
<br />D.
<br />BOTTOM AND TOP TRACK OF CURVED CURTAIN WALL TO BE
<br />CONSTRUCTED WITH 3 5/8"'FLEXTRACK' OR EQUAL. SOURCE: FIVE
<br />STAR SUPPLY (216) 595-9525
<br />2.02 GYPSUM BOARD MATERIALS
<br />A.
<br />GYPSUM WALLBOARD: ASTM C 36/C 36M AND ASTM C 1396/C 1396M.
<br />SIZES TO MINIMIZE JOINTS IN PLACE, ENDS SQUARE CUT.
<br />1. EDGES: TAPERED.
<br />B.
<br />WATER-RESISTANT GYPSUM BACKING BOARD: ASTM C 630/C 630M
<br />AND ASTM C 1396/C 1396M, ENDS SQUARE CUT.
<br />C.
<br />EXTERIOR GYPSUM SHEATHING BOARD: GYPSUM SHEATHING
<br />MANUFACTURED IN ACCORDANCE WITH ASTM C 1177 WITH GLASS
<br />MATS BOTH SIDES AND LONG EDGES, WATER-RESISTANT TREATED
<br />CORE..
<br />1. EDGES: SQUARE, FOR VERTICAL APPLICATION.
<br />2.03 ACCESSORIES
<br />A.
<br />ACOUSTIC INSULATION: ASTM C 665, PREFORMED GLASS FIBER,
<br />FRICTION FIT TYPE, UNFACED.
<br />B.
<br />JOINT MATERIALS: ASTM C 475 AND AS RECOMMENDED BY GYPSUM
<br />BOARD MANUFACTURER FOR PROJECT CONDITIONS.
<br />1. POWDER -TYPE VINYL -BASED JOINT COMPOUND.
<br />C.
<br />SCREWS: ASTM C 1002, SELF -PIERCING TAPPING TYPE.
<br />D.
<br />STAPLES: ASTM C 840.
<br />E.
<br />ANCHORAGE TO SUBSTRATE: TIE WIRE, NAILS, SCREWS, AND
<br />OTHER METAL SUPPORTS, OF TYPE AND SIZE TO SUIT APPLICATION,
<br />TO RIGIDLY SECURE MATERIALS IN PLACE.
<br />PART 3 EXECUTION
<br />3.01 EXAMINATION
<br />A.
<br />VERIFY THAT PROJECT CONDITIONS ARE APPROPRIATE FOR WORK
<br />OF THIS SECTION TO COMMENCE.
<br />3.02 FRAMING
<br />INSTALLATION
<br />A.
<br />METAL FRAMING: COMPLY WITH ASTM C 754 AND MANUFACTURER'S
<br />INSTRUCTIONS.
<br />B.
<br />SUSPENDED CEILINGS AND SOFFITS: SPACE FRAMING AND FURRING
<br />MEMBERS AT 16 INCHES (400 MM) ON CENTER.
<br />1. LEVEL CEILING SYSTEM TO A TOLERANCE OF 1/1200.
<br />2. LATERALLY BRACE ENTIRE SUSPENSION SYSTEM.
<br />3. INSTALL BRACING AS REQUIRED AT ENTRY VESTIBULE TO
<br />RESIST WIND UPLIFT.
<br />C.
<br />STUDS: SPACE STUDS AS INDICATED.
<br />1. EXTEND PARTITION FRAMING TO STRUCTURE AND TO OTHER
<br />LOCATIONS AS INDICATED ON THE DRAWINGS.
<br />2. PARTITIONS TERMINATING AT STRUCTURE: ATTACH
<br />EXTENDED LEG TOP RUNNER TO STRUCTURE, MAINTAIN
<br />CLEARANCE BETWEEN TOP OF STUDS AND STRUCTURE, AND
<br />BRACE BOTH FLANGES OF STUDS WITH CONTINUOUS
<br />BRIDGING.
<br />3. SPACE STUD FRAMING AT RADIUS WALL TO PROVIDE UNIFORM
<br />GYPSUM BOARD FINISH.
<br />4. SPACE STUDS & FRAMING TO ACCOMODATE THROUGH WALL
<br />AND RECESS EQUIPMENT IN WALL.
<br />D.
<br />OPENINGS: REINFORCE OPENINGS AS REQUIRED FOR WEIGHT OF
<br />DOORS OR OPERABLE PANELS, USING NOT LESS THAN DOUBLE
<br />STUDS AT JAMBS.
<br />E.
<br />BLOCKING: INSTALL BLOCKING FOR SUPPORT OF PLUMBING
<br />FIXTURES, FIXTURES AND EQUIPMENT. COMPLY WITH SECTION
<br />061000 FOR WOOD BLOCKING.
<br />3.03 ACOUSTIC
<br />ACCESSORIES INSTALLATION
<br />A.
<br />ACOUSTIC INSULATION: PLACE TIGHTLY WITHIN SPACES, AROUND
<br />CUT OPENINGS, BEHIND AND AROUND ELECTRICAL AND
<br />MECHANICAL ITEMS WITHIN PARTITIONS, AND TIGHT TO ITEMS
<br />PASSING THROUGH PARTITIONS.
<br />3.04 GYPSUM BOARD INSTALLATION
<br />A.
<br />COMPLY WITH ASTM C 840 AND MANUFACTURER'S INSTRUCTIONS.
<br />INSTALL TO MINIMIZE BUTT END JOINTS, ESPECIALLY IN HIGHLY
<br />VISIBLE LOCATIONS.
<br />B.
<br />SINGLE -LAYER NON -RATED: INSTALL GYPSUM BOARD IN MOST
<br />ECONOMICAL DIRECTION, WITH ENDS AND EDGES OCCURRING OVER
<br />FIRM BEARING.
<br />C.
<br />GYPSUM SHEATHING: COMPLY WITH GA-253. INSTALL SHEATHING
<br />HORIZONTALLY, WITH EDGES BUTTED TIGHT AND ENDS OCCURRING
<br />OVER FIRM BEARING.
<br />D.
<br />INSTALLATION ON METAL FRAMING: USE SCREWS FOR ATTACHMENT
<br />OF ALL GYPSUM BOARD.
<br />3.05 INSTALLATION OF TRIM AND ACCESSORIES
<br />A.
<br />CONTROL JOINTS: PLACE CONTROL JOINTS CONSISTENT WITH LINES
<br />OF BUILDING SPACES.
<br />B.
<br />CORNER BEADS: INSTALL AT EXTERNAL CORNERS, USING LONGEST
<br />PRACTICAL LENGTHS.
<br />3.06 JOINT
<br />TREATMENT
<br />A.
<br />FINISH GYPSUM BOARD IN ACCORDANCE WITH ASTM C 840. LEVEL 4
<br />FINISH AT WALLS AND CEILINGS EXCEPT FOR LEVEL 4 FINISH AT
<br />CEILING LOCATIONS INDICATED ON PLANS AND LEVEL 1 ABOVE
<br />CEILINGS.
<br />3.07 TOLERANCES
<br />A.
<br />MAXIMUM VARIATION OF FINISHED GYPSUM BOARD SURFACE FROM
<br />TRUE FLATNESS: 1/8 INCH IN 10 FEET (3 MM IN 3 M) IN ANY
<br />DIRECTION.
<br />3.08 FINISH LEVEL SCHEDULE
<br />A.
<br />LEVEL 1: ABOVE FINISHED CEILINGS CONCEALED FROM VIEW.
<br />B.
<br />LEVEL 4: WALLS AND CEILINGS SCHEDULED TO RECEIVE PAINT
<br />FINISH.
<br />END OF SECTION
<br />Z
<br />O
<br />H
<br />d
<br />U
<br />W
<br />W
<br />0
<br />uw
<br />4,11011. OF
<br />ISSUED FOR:
<br />PERMIT
<br />03.14.19
<br />BID
<br />03.14.19
<br />CONSTRUCTION
<br />00.00.00
<br />REVIEW SET
<br />03.14.19
<br />JOB NO.
<br />18390
<br />AS1 05
<br />
|