|
UPDATED 11/02/2020
<br />WATERPR01
<br />MEMBRANE
<br />INSTALL ME
<br />DOWN OUT:
<br />FACE OF Will
<br />1/2" (13 mr
<br />BELOW NAII
<br />PERMA-TITE SPLICE PLATE
<br />NOT SHOWN FOR CLARITY
<br />PERMA-TITE GALV.
<br />ANCHOR CLIPS 4'-0" O.C.
<br />STAINLESS STEEL
<br />FASTENERS PROVIDED
<br />BY JOHNS MANVILLE
<br />PERMA-TITE METAL
<br />COPING COVER
<br />DYNAFLEX CAP SHEET
<br />3/8" (10 mm) GAP
<br />FOR WALL VARIATIONS
<br />JM MODIFIED BITUMEN
<br />BASE SHEET
<br />NOTES:
<br />1. REFER TO JOHNS MANVILLE WEBSITE (www.jm.com) FOR MOST UP-TO-DATE INFORMATION.
<br />2. INSTALL PERMA-TITE COPING IN ACCORDANCE WITH INSTALLATION INSTRUCTIONS INCLUDED WITH THE PRODUCT.
<br />PREFABRICATED INSIDE/OUTSIDE CORNERS AND END CAPS ARE AVAILABLE TO COMPLETE THE INSTALLATION.
<br />SHOP FABRICATED COPINGS SHOULD BE INSTALLED IN ACCORDANCE WITH SMACNA GUIDELINES.
<br />3. VERTICAL JOINTS ARE TO BE OVERLAPPED 4" MINIMUM FOR ALL APPLICATIONS. 3 COURSING WITH MBR UTILITY
<br />CEMENT AND FABRIC OR JM MBR FLASHING CEMENT IS RECOMMENDED ON ALL VERTICAL FLASHING LAPS AND
<br />INSIDE/OUTSIDE CORNERS EXTENDING PAST LEADING EDGE OF CANT STRIP.
<br />4, ANY CARPENTRY, METAL WORK, OR MASONRY CONSTRUCTION SHOULD BE DESIGNED AND CONSTRUCTED IN
<br />ACCORDANCE WITH LOCAL CODE REQUIREMENTS AND/OR PROJECT SPECIFICATIONS. THESE COMPONENTS
<br />SHOULD BE REVIEWED AND APPROVED BY A LICENSED DESIGN PROFESSIONAL. CONTACT JM TECHNICAL FOR
<br />METAL OPTIONS TO BE INCLUDED WITHIN THE JM NDL GUARANTEE.
<br />S. PLEASE SEE BITUMINOUS FLASHING SPECIFICATIONS FOR A FULL DESCRIPTION OF INSTALLATION
<br />INSTRUCTIONS AND REQUIREMENTS WHICH ARE CONSIDERED A PART OF THIS DETAIL.
<br />DRAWING NO. PERMA-TITE COPING SYSTEM OVER MOD. BIT.
<br />DFE-2 (PT) MEMBRANE TYPE
<br />Johns Mtm1Ne is a marmifaaxe of comrtledal rodng poducb and dlon INS general canceptud
<br />FLASHING WALL JM BUR information to you as a oourtesy This oomplimereary assistance Is not so be used or relied won by
<br />anyone as a at Ibrte for professional erpneefng design and documentation required by building
<br />not SCALE ISSUE DATE MAXIMUM GUARANTEE TERM: code, contract. a applicable taw. B1 stapling stew Cy Johns
<br />you agree tttey do, anther t any
<br />N.T.S 02-06-19 20 YEAR reeppreresontatldona erhdaserraar is d. or an assumption by Johns Manville or any ieblNU ter a their de
<br />ad4+xY design d the building a airy otter mabnal not suppled by Jdns amide.
<br />APPROVED SBS OR ---
<br />APP FLASHING
<br />HEAT WELD BITUMEN -
<br />METAL SET IN MBR
<br />FLASHING CEMENT OR
<br />MBR UTILITY CEMENT -
<br />NAILS APPROX.
<br />3" O.C. STAGGERED -
<br />01
<br />MAP
<br />PRo
<br />`O
<br />k
<br />Af
<br />z?� try 641 <z
<br />�SyzNGJ
<br />yf �GSI
<br />3�
<br />Cs
<br />m
<br />GUTTER PER
<br />SMACNA
<br />GUTTER STRAPS
<br />METAL GRAVEL STOP,
<br />PRIME FLANGE ON BOTH
<br />SIDES (SEE NOTES)
<br />EXTEND ONE PLY OR
<br />A SEPARATE MEMBRANE
<br />TO TURN DOWN EDGE
<br />WOOD NAILERS
<br />FASTEN AS REQ'D.
<br />NOTES:
<br />1. SBS HEAT WELDED FLASHINGS CAN ONLY BE USED WITH SBS OR BUR SYSTEMS. APP HEAT WELDED FLASHINGS CAN ONLY BE USED
<br />WITH APP OR BUR SYSTEMS. (PLEASE REFER TO THE APPROPRIATE TABLE IN THE BITUMINOUS FLASHING SPECIFICATION
<br />INDICATING ACCEPTABLE FLASHING PRODUCTS FOR EACH OF THE SBS OR APP HEAT WELDED SYSTEMS.)
<br />2. *A BACKER PLY IS REQUIRED FOR EXTENDED TERM 2S AND 30 YEAR GUARANTEES.
<br />3. ANY CARPENTRY, METAL WORK, OR MASONRY CONSTRUCTION SHOULD BE DESIGNED AND CONSTRUCTED IN ACCORDANCE WITH
<br />LOCAL CODE REQUIREMENTS AND/OR PROJECT SPECIFICATIONS. THESE COMPONENTS SHOULD BE REVIEWED AND APPROVED BY
<br />A LICENSED DESIGN PROFESSIONAL.
<br />4. SHOP FABRICATED GRAVEL STOP SHOULD BE INSTALLED IN ACCORDANCE WITH SMACNA AND/OR NRCA GUIDELINES. LAPS
<br />SHALL UTILIZE EITHER APPROVED SPLICE PLATES OR 4" MINIMUM OVERLAPS WITH A APPROVED SEALANT.
<br />S. USE ASPHALT PRIMER ON GRAVEL STOP FLANGES WHEN USING MBR UTILITY CEMENT. USE PERMAFLASH PRIMER ON GRAVEL
<br />STOP FLANGES WHEN USING MBR FLASHING CEMENT.
<br />6. PLEASE SEE BITUMINOUS FLASHING SPECIFICATIONS FOR A FULL DESCRIPTION OF INSTALLATION INSTRUCTIONS AND
<br />REQUIREMENTS WHICH ARE CONSIDERED A PART OF THIS DETAIL
<br />7. CAUTION: IMPROPER USE OF THESE MATERIALS AND APPLICATION EQUIPMENT CAN RESULT IN SEVERE BURNS, AND/ OR DAMAGE
<br />TO PROPERTY. THE MECHANIC MUST INSTALL THESE MATERIALS USING THE TECHNIQUES RECOMMENDED BY JM AND THOSE
<br />FOUND IN THE CERTIFIED ROOFING TORCH APPLICATOR (CERTA) PROGRAM AVAILABLE THROUGH THE NATIONAL ROOFING
<br />CONTRACTORS ASSOCIATION.
<br />u"AWIN"P". ROOF EDGE GUTTER
<br />HW4(GTR) MEMBRANE TYPE:
<br />Johns torm Manta is a manufacture of The
<br />noohg products sin t ten this d Wo b y
<br />FLASHING EDGE BUR rdorrtsstlan to you as a courtesy TAe mrnpllfnefiary assistance is not m be used a relbe Won by
<br />anyone as a sullattub to professional engineering design and documentation mquiled by building
<br />SCALE ISSUE DATE MAXIMUM GUARANTEE TERM: cod, contact, a applicable Wes By accepting these comments you agree Lev do rid constitute arty
<br />N.T.S 7-7-14 gwgweeees nor �wdt x ousinmern carats 'tupptteaDy SJoseall,IMarno Otter me to IVjii1
<br />WATERPRO,
<br />MEMBRANE
<br />INSTALL ME
<br />DOWN OUT
<br />FACE OF WI
<br />1/2"(13 mr
<br />BELOW NAI
<br />PERMA-TITE SPLICE PLATE
<br />NOT SHOWN FOR CLARITY
<br />PERMA-TITE GALV.
<br />ANCHOR CLIPS 4'-0" O.C.
<br />STAINLESS STEEL
<br />FASTENERS PROVIDED
<br />BY JOHNS MANVILLE
<br />PERMA-TITE METAL
<br />COPING COVER
<br />JM MODIFIED BITUMEN
<br />CAP SHEET
<br />3/8" (10 mm) GAP
<br />FOR WALL VARIATIONS
<br />JM MODIFIED BITUMEN
<br />BASE SHEET
<br />NOTES:
<br />1, SBS HEAT WELDED FLASHINGS CAN ONLY BE USED WITH SBS OR BUR SYSTEMS. APP HEAT WELDED FLASHINGS CAN ONLY BE
<br />USED WITH APP OR BUR SYSTEMS. (PLEASE REFER TO THE APPROPRIATE TABLE IN THE BITUMINOUS FLASHING
<br />SPECIFICATION INDICATING ACCEPTABLE FLASHING PRODUCTS FOR EACH OF THE SBS OR APP HEAT WELDED SYSTEMS.)
<br />2. VERTICAL JOINTS ARE TO BE OVERLAPPED 4" MINIMUM FOR ALL APPLICATIONS. 3 COURSING WITH MBR UTILITY CEMENT
<br />AND FABRIC OR JM MBR FLASHING CEMENT IS RECOMMENDED ON ALL VERTICAL FLASHING LAPS AND INSIDE/OUTSIDE
<br />CORNERS EXTENDING PAST LEADING EDGE OF CANT STRIP.
<br />3. ANY CARPENTRY, METAL WORK, OR MASONRY CONSTRUCTION SHOULD BE DESIGNED AND CONSTRUCTED IN ACCORDANCE
<br />WITH LOCAL CODE REQUIREMENTS AND/OR PROJECT SPECIFICATIONS. THESE COMPONENTS SHOULD BE REVIEWED AND
<br />APPROVED BY A LICENSED DESIGN PROFESSIONAL. CONTACT JM TECHNICAL FOR METAL OPTIONS TO BE INCLUDED WITHIN
<br />THE JM NDL GUARANTEE.
<br />4. INSTALL PERMA-TITE COPING IN ACCORDANCE WITH INSTALLATION INSTRUCTIONS INCLUDED WITH THE PRODUCT.
<br />PREFABRICATED INSIDE/OUTSIDE CORNERS AND END CAPS ARE AVAILABLE TO COMPLETE THE INSTALLATION.
<br />SHOP FABRICATED COPINGS SHOULD BE INSTALLED IN ACCORDANCE WITH SMACNA GUIDELINES.
<br />S. PLEASE SEE BITUMINOUS FLASHING SPECIFICATIONS FOR A FULL DESCRIPTION OF INSTALLATION INSTRUCTIONS
<br />AND REQUIREMENTS WHICH ARE CONSIDERED A PART OF THIS DETAIL
<br />6. CAUTION: IMPROPER USE OF THESE MATERIALS AND APPLICATION EQUIPMENT CAN RESULT IN SEVERE BURNS, AND/ OR
<br />DAMAGE TO PROPERTY. THE MECHANIC MUST INSTALL THESE MATERIALS USING THE TECHNIQUES RECOMMENDED BY JM
<br />AND THOSE FOUND IN THE CERTIFIED ROOFING TORCH APPLICATOR (CERTA) PROGRAM AVAILABLE THROUGH THE
<br />NATIONAL ROOFING CONTRACTORS ASSOCIATION.
<br />DRAWING NO. PERMA-TITE COPING SYSTEM OVER MOD. BIT.
<br />HW-2 (PT) MEMBRANE TYPE.
<br />John Manvite is a manofrresaen of camasairsla flotn9
<br />Poduds and offers this general conceptual
<br />as a oolrte .This d stance Is used a retied u b rdomWanlO line ass fnOtbteaUa pan
<br />JM R f :h gal g FLASHING WALL BU
<br />anyone as a wbstbb hu professional engineetng design and dockaherhfatten required DY DUNdng
<br />SCALE ISSUE DATE MAXIMUM GUARANTEE TERM: Dodo, l onaect, or awcabte law. By acoep" these comments you agree e+ev do rid ooneMM any
<br />ra btons endorsements d, a an assunpton by Johns Manvle of an III nor ether the
<br />N.T.S 02-08.19 20 YEAR a puary d t e design of the bultlrtg a airy dher maternalnor supplied b/ ,%fns twfanvga johMAIIIIINIMIlliffe
<br />MBR FLASHING CEMENT,
<br />OR MBR UTILITY CEMENT
<br />METAL SET IN MBR
<br />FLASHING CEMENT OR
<br />MBR UTILITY CEMENT -
<br />NAILS APPROX.
<br />3" O.C. STAGGERED
<br />APO
<br />RpV,
<br />�O O
<br />F�k
<br />WAS
<br />Mf,I,Mf ryO0
<br />,ct4
<br /><vS,yfNGSI c�
<br />3�
<br />m
<br />c�
<br />m
<br />I0
<br />METAL GRAVEL STOP,
<br />PRIME FLANGE ON BOTH
<br />SIDES (SEE NOTES)
<br />EXTEND ONE PLY OR
<br />A SEPARATE MEMBRANE
<br />TO TURN DOWN EDGE
<br />WOOD NAILERS
<br />FASTEN AS REQ'D.
<br />GUTTER PER
<br />SMACNA
<br />GUTTER STRAPS
<br />NOTES:
<br />1. REFER TO JOHNS MANVILLE WEBSITE (www.jm.com) FOR MOST UP-TO-DATE INFORMATION.
<br />2. *AN SBS BACKER PLY EXTENDING 8" FROM THE EDGE OF THE ROOF IS REQUIRED FOR EXTENDED TERM 25 AND 30 YEAR GUARANTEES.
<br />3. ANY CARPENTRY, METAL WORK, OR MASONRY CONSTRUCTION SHOULD BE DESIGNED AND CONSTRUCTED IN ACCORDANCE WITH LOCAL
<br />CODE REQUIREMENTS AND/OR PROJECT SPECIFICATIONS. THESE COMPONENTS SHOULD BE REVIEWED AND APPROVED BY A LICENSED
<br />DESIGN PROFESSIONAL. CONTACT JM TECHNICAL FOR METAL OPTIONS TO BE INCLUDED WITHIN THE JM NDL GUARANTEE.
<br />4. SHOP FABRICATED GRAVEL STOPS AND GUTTERS SHOULD BE INSTALLED IN ACCORDANCE WITH SMACNA AND/OR NRCA GUIDELINES.
<br />GRAVEL STOP LAPS SHALL UTILIZE EITHER APPROVED SPLICE PLATES OR 4" MINIMUM OVERLAPS WITH APPROVED SEALANT.
<br />S. PLEASE SEE BITUMINOUS FLASHING SPECIFICATIONS FOR A FULL DESCRIPTION OF INSTALLATION INSTRUCTIONS AND REQUIREMENTS
<br />WHICH ARE CONSIDERED A PART OF THIS DETAIL
<br />6. USE ASPHALT PRIMER ON GRAVEL STOP FLANGES WHEN USING MBR UTILITY CEMENT. USE PERMAFLASH PRIMER ON GRAVEL STOP
<br />FLANGES WHEN USING MBR FLASHING CEMENT.
<br />DRAWING ND. ROOF EDGE GUTTER
<br />BE4(GTR) MEMBRANE TYPE
<br />JOMe Manvine is a mmttscbaer of rommefClal foaling products and otters Ihs general conceptual
<br />FLASHING EDGE BUR r+bmteao t to you as a courtesy. TM complimentary assistance Is not probe used a retied upon by
<br />anyone as a substitute for professional engnesring design and documentation mow by bu dng
<br />stLthe n
<br />SCALE ISSUE DATE MAXIMUM GUARANTEE TERM cod, contacl• a applicable law By aaepin9 these comments you agree they do rid don any
<br />representations, endorsements of, a an seatery�son by Johns Manville d any s , Ity for either the f�
<br />N.T.S 12-10-18 adequaq or the design of this bulling a any otter maternal not sl�plled Isy Jolla Marn se johNS Ati�iV%as
<br />�!f
<br />HEX HEAD
<br />FASTENERS
<br />FASTEN MEMBRANE
<br />6" O.C. ON BACK
<br />SIDE OF WALL
<br />ROLL TOP OF LEAD FLASHING DOWN JM SINGLE PLY MEMBRANE
<br />INTO PIPE APPROXIMATELY 1" ADHERED TO WALL
<br />PLUMBING VENT STACK WOOD NAILER FASTENED
<br />AS REQUIRED
<br />APPROVED SBS OR AP FLASHING
<br />LEAD FLASHING `1 JM SINGLE PLY
<br />CANTED BEAD OF MBR UTILITY CEMENT MEMBRANE ADHESIVE
<br />PRIME FLANGE OF LEAD FLASHING WITH FASTEN 12" O.C. W/APPROVED FASTENERS
<br />PRIMER ON BOTH SIDES, (SEE NOTES)
<br />SET LEAD FLANGE IN MBR UTILITY 3 COURSING
<br />CEMENT, OR MBR FLASHING CEMENT. (OPTIONAL)
<br />ROUND CORNERS
<br />`t �OF TARGET PATCHES
<br />AS SHOWN
<br />F+ :i
<br />a x-HEAT WELD \�
<br />+. BITUMEN
<br />r
<br />MASONRY
<br />WALL tit
<br />ASPHALT.
<br />t kti�� PRIMER
<br />FESCANT tit
<br />PLUS
<br />,
<br />qPP
<br />Rp�
<br />Eo o pt JMt.
<br />NOTES: W
<br />1. SBS HEAT WELDED FLASHINGS CAN ONLY BE USED WITH SBS OR BUR SYSTEMS. APP HEAT WELDED FLASHINGS CAN ONLY
<br />BE USED WITH APP OR BUR SYSTEMS. (PLEASE REFER TO THE APPROPRIATE TABLE IN THE BITUMINOUS FLASHING
<br />SPECIFICATION INDICATING ACCEPTABLE FLASHING PRODUCTS FOR EACH OF THE SBS OR APP HEAT WELDED SYSTEMS.)
<br />2. LEAD FLASHING SHALL BE 2.5 LBS. PER SQUARE FOOT MINIMUM.
<br />3, IF LEAD FLASHING IS NOT DESIRED OR PIPE IS TOO TALL, SEE PERMAFLASH DETAIL PMF-6 & PMF-6S FOR A SUITABLE ALTERNATIVE.
<br />4. USE ASPHALT PRIMER ON LEAD FLANGES WHEN USING MBR UTILITY CEMENT. USE PERMAFLASH PRIMER ON LEAD FLANGES
<br />WHEN USING MBR FLASHING CEMENT.
<br />S. PLEASE SEE BITUMINOUS FLASHING SPECIFICATIONS FOR A FULL DESCRIPTION OF INSTALLATION INSTRUCTIONS AND
<br />REQUIREMENTS WHICH ARE CONSIDERED A PART OF THIS DETAIL
<br />6. CAUTION: IMPROPER USE OF THESE MATERIALS AND APPLICATION EQUIPMENT CAN RESULT IN SEVERE BURNS, AND/
<br />OR DAMAGE TO PROPERTY. THE MECHANIC MUST INSTALL THESE MATERIALS USING THE TECHNIQUES RECOMMENDED
<br />BY JM AND THOSE FOUND IN THE CERTIFIED ROOFING TORCH APPLICATOR (CERTA) PROGRAM AVAILABLE THROUGH
<br />THE NATIONAL ROOFING CONTRACTORS ASSOCIATION.
<br />DRAWING NO. PLUMBING VENT
<br />HW_9 MEMBRANE TYPE: Jolts ManvNte is a mawfaceear of commercial roofing products and offers ne general conceptual
<br />DRAINS & VENTS BUR mWination to you as a coulai This complimentary assistance is not to be u rled upon by
<br />anyone asa subemaae ter ppdessgnai engneemg des gn and dos w"ion Fe red by bubig
<br />SCALE ISSUE DATE MAXIMUM GUARANTEE TERM: code. contract, a appllcahle low. By accepting these oormnents you agree they do not constitute any
<br />N.T.S 7-7-14 strop u loch the endorsements ator an amff on by Johrs MamAlle of any aabady mr a" he
<br />�
<br />Qeq acy design d am building a any other material not supplied by Johns M lk
<br />HEX HEAD
<br />FASTENERS
<br />WATERPROOF Co�Z��
<br />MEMBRANE
<br />1" DIA. CAP NAILS
<br />6" O.C. AT TOP
<br />q
<br />JM BASE
<br />SHEET--__ 4 \\\\
<br />WOOD NAILER 0
<br />FASTENED AS
<br />REQUIRED '
<br />CO ,•r
<br />O / 8" MIN. TO 24" MAX.
<br />a BASE FLASHING HT.
<br />2MiN
<br />NAILED
<br />'BOTH DIIRREp IONDIA S
<br />WOOD NAILS 6' O.C.
<br />WALL AT TOP EDGe
<br />PLUS
<br />APPROVED SBS OR
<br />APP FLASHING
<br />TD,o
<br />HEAT WELD BITUMEN
<br />APPROVED SBS OR
<br />APP BACKER PLY
<br />qPP ��ti
<br />NOTES:
<br />1. SBS HEAT WELDED FLASHINGS CAN ONLY BE USED WITH SBS OR BUR SYSTEMS. APP HEAT WELDED FLASHINGS CAN ONLY
<br />BE USED WITH APP OR BUR SYSTEMS. (PLEASE REFER TO THE APPROPRIATE TABLE IN THE BITUMINOUS FLASHING
<br />SPECIFICATION INDICATING ACCEPTABLE FLASHING PRODUCTS FOR EACH OF THE SBS OR APP HEAT WELDED SYSTEMS.)
<br />2. VERTICAL JOINTS ARE TO BE OVERLAPPED 4" MINIMUM FOR ALL APPLICATIONS. 3 COURSING WITH MBR UTILITY CEMENT AND
<br />FABRIC OR JM MBR FLASHING CEMENT IS RECOMMENDED ON ALL VERTICAL FLASHING LAPS AND INSIDE/OUTSIDE CORNERS
<br />EXTENDING PAST LEADING EDGE OF CANT STRIP.
<br />3. ANY CARPENTRY, METAL WORK, OR MASONRY CONSTRUCTION SHOULD BE DESIGNED AND CONSTRUCTED IN ACCORDANCE WITH LOCAL
<br />CODE REQUIREMENTS AND/OR PROJECT SPECIFICATIONS. THESE COMPONENTS SHOULD BE REVIEWED AND APPROVED BY A LICENSED
<br />DESIGN PROFESSIONAL.
<br />4. INSTALL PRESTO LOCK COPING IN ACCORDANCE WITH INSTALLATION INSTRUCTIONS INCLUDED WITH THE PRODUCT. PREFABRICATED
<br />INSIDE/OUTSIDE CORNERS AND END CAPS ARE AVAILABLE TO COMPLETE THE INSTALLATION. SHOP FABRICATED COPINGS SHOULD BE
<br />INSTALLED IN ACCORDANCE WITH SMACNA GUIDELINES.
<br />S. PLEASE SEE BITUMINOUS FLASHING SPECIFICATIONS FOR A FULL DESCRIPTION OF INSTALLATION INSTRUCTIONS AND
<br />REQUIREMENTS WHICH ARE CONSIDERED A PART OF THIS DETAIL
<br />6. CAUTION: IMPROPER USE OF THESE MATERIALS AND APPLICATION EQUIPMENT CAN RESULT IN SEVERE BURNS, AND/ OR DAMAGE TO
<br />PROPERTY. THE MECHANIC MUST INSTALL THESE MATERIALS USING THE TECHNIQUES RECOMMENDED BY JM AND THOSE FOUND IN THE
<br />CERTIFIED ROOFING TORCH APPLICATOR (CERTA) PROGRAM AVAILABLE THROUGH THE NATIONAL ROOFING CONTRACTORS ASSOCIATION.
<br />DRAWING NO. BASE FLASHING FOR WOOD WALL > 24" W/ COPING
<br />HW-3 (WH) MEMBRANE TYPE
<br />M r I
<br />Johns anvilb e a manulecaxer d commercial Dori cute and ofte+s rise ra cons rig prod gore Deal as
<br />b a . This complementary assistance is not to used a' rolled D nfamaaah u as 8 fdm s be
<br />you D lay ups+ t
<br />1 ��y
<br />FLASHING WALL BUR L
<br />as a subs M r dessional do des' documentation r buldn an M e b tee and docu eel
<br />g rao b/ s
<br />code contract a a N plow. B t commends se they do rid don b ern
<br />SCALE ISSUE DATE MAXIMUM GUARANTEE TERM: representations. erhdors�tes d. or an assumption by Johns Manville ofany sebday for east the y
<br />N.T.S 02-08-19 adequsty of the design d the Dulld rig a any other material not supped ter Johns ManvNb joko MW due
<br />PRESTO LOCK METAL
<br />COPING COVER
<br />PRESTO LOCK
<br />ANCHOR CUP
<br />5'-0" MAX. WITHOUT
<br />INTERMEDIATE
<br />VERTICAL FASTENING
<br />FOR WALL FLASHINGS OVER S'-0"
<br />HIGH INTERMEDIATE FASTENING
<br />IS REQUIRED AT 5'-0" INTERVALS
<br />4" MIN, COUNTER FLASHING
<br />OVERLAP PAST TOP OF BASE
<br />FLASHING
<br />8" MIN. TO 24"
<br />MAX. BASE
<br />FLASHING
<br />4" MIN. (1 FLASHING)
<br />OR
<br />6" MIN. (2 FLASHINGS)
<br />METAL
<br />/'aMETAL COUNTER FLASHING
<br />** MASONRY FASTENERS WITH 1" MIN. 0
<br />- PLATE 6" O.C. AT TOP EDGE
<br />- JM CLEANBOND CAP
<br />MBR FLASHING CEMENT OR //
<br />-MBR UTILITY CEMENT /
<br />- JM
<br />D/ CLEANBON SA
<br />NOTES: \E/
<br />1. REFER TO JOHNS MANVILLE WEBSITE (www.jm.com) FOR MOST UP-TO-DATE INFORMATION.
<br />2. *AN SBS BACKER PLY EXTENDING 2" MIN. FROM TOE OF CANT IS REQUIRED FOR EXTENDED TERM 25 AND 30 YEAR GUARANTEES,
<br />3. **A TERMINATION BAR FASTENED 6" O.C. IS AN ACCEPTABLE SECUREMENT ALTERNATIVE ALONG THE TOP EDGE OF THE FLASHING.
<br />4. ANY CARPENTRY, METAL WORK, OR MASONRY CONSTRUCTION SHOULD BE DESIGNED AND CONSTRUCTED IN ACCORDANCE WITH
<br />LOCAL CODE REQUIREMENTS AND/OR PROJECT SPECIFICATIONS. THESE COMPONENTS SHOULD BE REVIEWED AND APPROVED
<br />BY A LICENSED DESIGN PROFESSIONAL.
<br />5, INSTALL PRESTO LOCK COPING IN ACCORDANCE WITH INSTALLATION INSTRUCTIONS INCLUDED WITH THE PRODUCT.
<br />PREFABRICATED INSIDE/OUTSIDE CORNERS AND END CAPS ARE AVAILABLE TO COMPLETE THE INSTALLATION. SHOP FABRICATED
<br />COPINGS SHOULD BE INSTALLED IN ACCORDANCE WITH SMACNA GUIDELINES.
<br />6. VERTICAL JOINTS ARE TO BE OVERLAPPED 4" MINIMUM FOR ALL APPLICATIONS. 3 COURSING WITH MBR UTILITY CEMENT AND
<br />FABRIC OR JM MBR FLASHING CEMENT IS RECOMMENDED ON ALL VERTICAL FLASHING LAPS AND INSIDE/OUTSIDE CORNERS
<br />EXTENDING PAST LEADING EDGE OF CANT STRIP.
<br />7. PLEASE SEE BITUMINOUS FLASHING SPECIFICATIONS FOR A FULL DESCRIPTION OF INSTALLATION
<br />INSTRUCTIONS AND REQUIREMENTS WHICH ARE CONSIDERED A PART OF THIS DETAIL.
<br />)RAIMNGNG SINGLE PLY WALL COVERING WITH BITUMINOUS BASE FLASHING
<br />CBE-1 5 MEMBRANE TYPE: Johns Manville Is a manutactmer of commercbl roof) products and otters trite general conceptual
<br />BUR Inmmletton to you as a courtesy. This complimentary asalstano@ is not to be used or rated upon by
<br />anyone as a substitute to prolmonal enpnsemg design and documentationrequiredby D Ong
<br />SCALE ISSUE DATE MAXIMUM GUARANTEE TERM: code, connect, or appNeahle law. By acceptingcommends these you agree tney,I do no ocri abte arty
<br />N.T.S 02-06-19 s Pena • anaaeeements d. cis
<br />aaaumpton by Joins MarndNh of anyY tablery to scoter the �IN
<br />acy d the daagn of than bueding a any r materal not wppl eel by Joh s Ma vim
<br />HEX HEAD PRESTO LOCK METAL
<br />FASTENERS - COPING COVER
<br />WATERPROOF PRESTO LOCK
<br />MEMBRANE ANCHOR CLIP
<br />1" DIA. CAP NAILS
<br />6" O.C. AT TOP
<br />JM BASE SHEET
<br />OPTIONAL
<br />WOOD NAILER 4,.
<br />FASTENED AS b
<br />REQUIRED
<br />,w
<br />� 8" MIN. TO 24" MAX.
<br />° BASE FLASHING HT.
<br />4" MIN. (1 FLASHING)
<br />OR
<br />6" MIN. (2 FLASHINGS)
<br />°
<br />NAILED 9"
<br />BOTH DIRECTIONS
<br />WOOD
<br />WALL
<br />FESCAN0 T
<br />PLUS
<br />--CLEANBOND CAP
<br />.�� MBR FLASHING CEMENT OR
<br />•Q�G'i coL �� MBR UTILITY CEMENT
<br />S> � y * CLEANBOND SA/SA
<br />.s
<br />NOTES: W
<br />1. REFER TO JOHNS MANVILLE WEBSITE (www.jm.com) FOR MOST UP-TO-DATE INFORMATION.
<br />2. *AN SBS BACKER PLY EXTENDING 2" MIN. FROM TOE OF CANT IS REQUIRED FOR EXTENDED TERM 25 AND 30 YEAR GUARANTEES.
<br />3. INSTALL PRESTO LOCK COPING IN ACCORDANCE WITH INSTALLATION INSTRUCTIONS INCLUDED WITH THE PRODUCT.
<br />PREFABRICATED INSIDE/OUTSIDE CORNERS AND END CAPS ARE AVAILABLE TO COMPLETE THE INSTALLATION. SHOP
<br />FABRICATED COPINGS SHOULD BE INSTALLED IN ACCORDANCE WITH SMACNA GUIDELINES.
<br />4. VERTICAL JOINTS ARE TO BE OVERLAPPED 4" MINIMUM FOR ALL APPLICATIONS. 3 COURSING WITH MBR UTILITY CEMENT AND
<br />FABRIC OR JM MBR FLASHING CEMENT IS RECOMMENDED ON ALL VERTICAL FLASHING LAPS AND INSIDE/OUTSIDE CORNERS
<br />EXTENDING PAST LEADING EDGE OF CANT STRIP.
<br />S. ANY CARPENTRY, METAL WORK, OR MASONRY CONSTRUCTION SHOULD BE DESIGNED AND CONSTRUCTED IN ACCORDANCE WITH
<br />LOCAL CODE REQUIREMENTS AND/OR PROJECT SPECIFICATIONS. THESE COMPONENTS SHOULD BE REVIEWED AND APPROVED BY A
<br />LICENSED DESIGN PROFESSIONAL. CONTACT JM TECHNICAL FOR METAL OPTIONS TO BE INCLUDED WITHIN THE JM NDL GUARANTEE.
<br />6. PLEASE SEE BITUMINOUS FLASHING SPECIFICATIONS FOR A FULL DESCRIPTION OF INSTALLATION INSTRUCTIONS AND
<br />REQUIREMENTS WHICH ARE CONSIDERED A PART OF THIS DETAIL.
<br />DRAWING NO. BASE FLASHING FOR WOOD WALL > 24" W/ COPING
<br />CBE-3 (HW) MEMBRANE TYPE
<br />Joins Manville e a manufacturerof commercial root products and ttNs ai c rigp offers pia onposttby
<br />BUR nmmwtion m you as a uurleay This complimentary aasteuna s not to be used a roled upal by
<br />anyone as a substitute for sional enghbsemg design and doamerdalon required by building
<br />SCALE ISSUE DATE MAXIMUM GUARANTEE TERM: ode. cottnd, a appNca a law By axeptlfg these oomneMayou agree Itxy do not oonsabb arty
<br />reeppreseMalnro, endasemerta d, or an ass mpbon by Johns Marndk of any rlabniy }a enter the
<br />N.T.S 02 06-19 a eIt of ne design d ttss budding a any doer meleal ndt supplied by Johns Mar via JWM A%t
<br />C
<br />U 0
<br />/tamps
<br />URBANoRDERAtempa, Inc.
<br />5006 south elberon street 33611
<br />813.832.5557
<br />aa2002"0
<br />URBAMRDER.tam a Inc.
<br />Thalia plane ere mpyNhtad and are subyad to
<br />copyfphl prolactlon as an •archileclurel work• under
<br />miion 102 or the mpNgtu aril 17 u.a.o. M
<br />amended Daaniber 19NO and known as anrilaaural
<br />works mpydght protedion ad of 1990. The
<br />protection Includes Out is not Nmited to aw owerail
<br />form as was as mr®perrent and mmposldon of
<br />spades and elemenb of the deeg" unde such
<br />protection, unauthorized use of these plans, work a
<br />hang rgaesented. non l gall reaull In dw cessation
<br />of rmnstrul- a buddkwp beep mtd aeaad la
<br />mawtaly mrtpensstan to UFtB 1a80ERmmnpa ins.,
<br />Florida regbuatkm A11,28002480.
<br />ISSUE DATE
<br />05/15/2019
<br />REVISIONS
<br />CV
<br />M
<br />ICU
<br />Z
<br />m
<br />0
<br />UAL
<br />Q
<br />cU
<br />(nn
<br />>UJ:�
<br />L
<br />ACV
<br />' V
<br />U)
<br />J
<br />W
<br />z
<br />0
<br />0
<br />JOE TOPH.
<br />FL.,REG. AR10095
<br />DATE, 11/19/2020
<br />DRWN:
<br />CWD:
<br />SCALE:
<br />SHEET NUMBER
<br />A=26
<br />VA, hill. 11119y7070 11 98-44 AM
<br />
|