|
GREASE INTERCEPTOR WORK SHEET
<br />BASED ON FLORIDA BUILDING CODE - PLUMBING 1003.3.4.
<br />IN ACCORDANCE WITH PDI-G101 SEC. 8.3.1 SIZING METHOD
<br />FLOW:
<br />3 COMPARTMENT
<br />SINK - K4
<br />VOLUME:
<br />18 x 18 x 14 = 4,536 CU. IN.
<br />4,536 x 3 COMP. = 13,608 TOTAL CU.IN.
<br />CAPACITY.
<br />13,608/231 = 59.0 GALLONS
<br />DISPLACEMENT.
<br />0.75 x 59.0 = 44.25 ADJUSTED GALLONS
<br />FLOW RATE:
<br />44.25/1 MINUTE DRAINAGE = 44.25 GPM
<br />MOP SINK - K7
<br />22 x 22 x 10 = 4,840 CU. IN.
<br />VOLUME:
<br />CAPACITY:
<br />4,840/231 = 21.0 GALLONS
<br />DISPLACEMENT:
<br />0.75 x 21.0 = 15.75 ADJUSTED GALLONS
<br />FLOW RATE:
<br />15.75/1 MINUTE DRAINAGE = 15.75 GPM
<br />DUMP SINK - K31
<br />20 x 20 x 10 = 4,000 CU. IN.
<br />VOLUME:
<br />CAPACITY:
<br />4,000/231 = 17.3 GALLONS
<br />DISPLACEMENT:
<br />0.75 x 17.3 = 12.975 ADJUSTED GALLONS
<br />FLOW RATE:
<br />12.975/1 MINUTE DRAINAGE = 12.975 GPM
<br />PREP SINK - K24
<br />16 x 20 x 8 = 2,560 CU. IN.
<br />VOLUME:
<br />CAPACITY:
<br />2,560/231 = 11.0 GALLONS
<br />DISPLACEMENT:
<br />0.75 x 11.0 = 8.25 ADJUSTED GALLONS
<br />FLOW RATE:
<br />8.25/1 MINUTE DRAINAGE = 8.25 GPM
<br />HAND SINK - K31
<br />10 x 14 x 5 = 700 CU. IN.
<br />VOLUME:
<br />CAPACITY.
<br />700/231 = 3.0 GALLONS
<br />DISPLACEMENT:
<br />0.75 x 3.0 = 2.25 ADJUSTED GALLONS
<br />FLOW RATE:
<br />2.25/1 MINUTE DRAINAGE = 2.25 GPM
<br />HAND SINK - K39
<br />15 x 9 x 5 = 675 CU. IN.
<br />VOLUME:
<br />CAPACITY:
<br />675/231 = 2.9 GALLONS
<br />DISPLACEMENT:
<br />0.75 x 2.9 = 2.175 ADJUSTED GALLONS
<br />FLOW RATE:
<br />2.175/1 MINUTE DRAINAGE = 2.175 GPM
<br />CHANNEL DRAIN
<br />- K23A
<br />40 x 5 x 5 = 1,000 CU. IN.
<br />VOLUME:
<br />CAPACITY:
<br />1,000/231 = 4.3 GALLONS
<br />DISPLACEMENT.
<br />0.75 x 4.3 = 3.225 ADJUSTED GALLONS
<br />FLOW RATE:
<br />3.225/1 MINUTE DRAINAGE = 3.225 GPM
<br />CHANNEL DRAIN
<br />- K23B
<br />100 x 5 x 5 = 2,500 CU. IN.
<br />VOLUME:
<br />CAPACITY:
<br />2,500/231 = 10.8 GALLONS
<br />DISPLACEMENT: 0.75 x 10.8 = 8.1 ADJUSTED GALLONS
<br />FLOW RATE: 8.1/1 MINUTE DRAINAGE = 8.1 GPM
<br />0.435 GPM
<br />0.435 GPM
<br />TOTAL
<br />3 COMP. SINK
<br />44.25 GPM x
<br />1
<br />x 100% = 44.25
<br />GPM
<br />MOP SINK
<br />15.75 GPM x
<br />1
<br />x 50% = 7.875
<br />GPM
<br />DUMP SINK
<br />12.975 GPM x
<br />1
<br />x 25% = 3.25
<br />GPM
<br />PREP SINK
<br />8.25 GPM x
<br />1
<br />x 25% = 2.0625
<br />GPM
<br />HAND SINK 1
<br />2.25 GPM x
<br />1
<br />x 25% = 0.5625
<br />GPM
<br />HAND SINK 2
<br />2.175 GPM x
<br />1
<br />x 25% = 0.54375
<br />GPM
<br />CHANNEL DRAIN 1
<br />3.225 GPM x
<br />1
<br />x 25% = 0.80625
<br />GPM
<br />CHANNEL DRAIN 2
<br />8.1 GPM x
<br />1
<br />x 25% = 2.025
<br />GPM
<br />HUB DRAIN
<br />0.435 GPM x
<br />3
<br />x 25% = 0.32625
<br />GPM
<br />FLOOR DRAIN
<br />0.435 GPM x
<br />1
<br />x 25% = 0.10875
<br />GPM
<br />TOTAL FLOW RATE:
<br />61.8
<br />GPM
<br />4" PIPE WITH A MINIMUM SLOPE OF
<br />1 /8" PER FOOT
<br />PUMP OUT
<br />FREQUENCY:
<br />GREASE
<br />GREASE
<br />NUMBER OF
<br />TURNS PER
<br />MEALS PER
<br />PRODUCTION
<br />POF IN
<br />CAPACITY IN
<br />DESCRIPTION
<br />SEATS
<br />SEAT
<br />DAY
<br />PER MEAL
<br />DAYS
<br />POUNDS
<br />34
<br />4
<br />136
<br />0.025
<br />90
<br />306
<br />EAT -IN
<br />100
<br />0.025
<br />90
<br />225
<br />TAKE-OUT
<br />TOTAL GREASE CAPACITY IN POUNDS NEEDED - 531
<br />THE GREASE TRAP USED FOR THE BASIS OF THIS
<br />CALCULATION IS A SCHIER GREAT BASIN SERIES GB-75
<br />INTERCEPTOR. THE GB-75 HAS A 4" INLET AND OUTLET
<br />AND RATED FOR A 75 GPM FLOW RATE WITH A TOTAL
<br />GREASE CAPACITY OF 653 POUNDS.
<br />PLUMBING FIXTURE AND PIPE SIZING SCHEDULE
<br />MARK
<br />FIXTURE
<br />WASTE
<br />VENT
<br />COLD
<br />HOT
<br />DESCRIPTION
<br />APPROVED MANUFACTURERS
<br />P-1
<br />WATER CLOSET
<br />INTEGRAL
<br />AS
<br />1 /2"
<br />---
<br />WATER CLOSET:
<br />AMERICAN STANDARD
<br />BARRIER FREE
<br />SHOWN
<br />FLOOR MOUNTED, GRAVITY FLUSH
<br />CADET 3 NO. 270AA.101
<br />ON
<br />TANK, ELONGATED, WHITE VITREOUS
<br />KOHLER
<br />PLANS
<br />CHINA, SIPHON ACTION CLOSE-
<br />HIGHUNE NO. K-3658
<br />COUPLED BOLT CAPS, 1.28 GPF
<br />16 1/2" HIGH. PROVIDE TANK WITH
<br />TRIP LEVER TO WIDE SIDE OF TOILET
<br />AREA.
<br />SEAT:
<br />OLSONITE
<br />FINISH WHITE, EXTRA HEAVY DUTY
<br />NO. 95SSCT
<br />PLASTIC FOR ELONGATED BOWL,
<br />BENEKE
<br />OPEN FRONT LESS COVER, SELF-
<br />N0. 527SS
<br />SUSTAINING STAINLESS STEEL CHECK
<br />HINGE. TOP OF SEAT 17 1 /2" AFF
<br />P-2
<br />LAVATORY
<br />1 1 /4"
<br />1 /2"
<br />1 /2"
<br />LAVATORY:
<br />AMERICAN STANDARD
<br />BARRIER FREE
<br />(104')
<br />WALL HUNG, 20x18, WHITE VITREOUS
<br />LUCERNE NO. 0356.015
<br />CHINA, FRONT OVERFLOW AND
<br />KOHLER
<br />HOLES ON 8" CENTERS, RIM 34" AFF
<br />KINGSTON NO. K-2006
<br />TRIM:
<br />DELTA
<br />LAVATORY FAUCET, WITH 8" CENTERS,
<br />NO. 3579LF-WFHDF
<br />5"+ GOOSENECK SPOUT, 4" WRIST
<br />CHICAGO
<br />BLADE HANDLES, PERFORATED GRID
<br />NO. 786-E3CP
<br />DRAIN w/OFFSET 1 1 /4" TAIL PIECE.
<br />PROVIDE STOPS, SUPPLIES, TRAP,
<br />ETC. TO MAKE A COMPLETE
<br />INSTALLATION. PROVIDE WITH 0.5
<br />FLOW CONTROL AERATOR.
<br />CARRIER:
<br />ZURN
<br />DURA-COATED RECTANGULAR STEEL
<br />NO. Z-1231
<br />UPRIGHTS WITH WELDED FEET,
<br />WATTS
<br />ADJUSTABLE TOP SUPPORT PLATE,
<br />NO. TCA-411
<br />MOUNTING FASTENERS, CONCEALED
<br />J. R. SMITH
<br />ARMS, STEEL SLEEVES & ALIGNMENT
<br />N0. 700
<br />TRUSS
<br />K7
<br />SERVICE SINK
<br />3"
<br />---
<br />---
<br />SINK:
<br />FIAT
<br />FLOOR MOUNTED, RECESSED 24x24x10
<br />NO. MSB-2424 (SINK)
<br />K8
<br />SERVICE
<br />---
<br />1 /2"
<br />1 /2"
<br />WHITE MOLDED STONE, FACTORY
<br />NO. 830-AA (FAUCET)
<br />FAUCET
<br />(135')
<br />STAINLESS STEEL DRAIN,
<br />NO. E-77-AA (BUMPERGAURD)
<br />VINYL BUMPERGUARD AND SILICONE
<br />NO. 833-AA (SEALANT)
<br />SEALANT.
<br />NO. 832-AA (HOSE AND BRACKET
<br />TRIM:
<br />NO. 889-CC (MOP HANGER)
<br />SINK FAUCET WITH VACUUM BREAKER,
<br />3/4" HOSE THREADED OUTLET, PAIL
<br />HOOK, INTEGRAL STOPS AND ROUGH
<br />CHROME FINISH, SEAL WALL WITH
<br />SILICONE SEALANT, PROVIDE 36"
<br />RUBBER HOSE. INSTALL FAUCET 36"
<br />AFF
<br />PLUMBING FIXTURE NOTES:
<br />1. MOUNTING HEIGHT AS PER ARCHITECT.
<br />2. TRAPS, SUPPLIES AND ALL OTHER EXPOSED PIPING SHALL BE CAST BRASS WITH
<br />A POLISHED CHROME FINISH. ACCEPTABLE MANUFACTURERS INCLUDE McGUIRE
<br />OR APPROVED EQUAL.
<br />3. ALL EXPOSED PIPING BELOW BARRIER FREE FIXTURES SHALL BE INSTALLED WITH
<br />ADA COMPLIANT PIPE WRAP KIT. SYSTEM SHALL BE PVC RESIN SEAMLESS
<br />CONSTRUCTION MFG BY PRO -WRAP OR APPROVED EQUAL.
<br />4. LAVATORIES SHALL BE INSTALLED WITH FLOOR MOUNTED CARRIERS AT STUD WALLS
<br />OR ATTACHED DIRECTLY TO BLOCK WALLS.
<br />5. PROVIDE FLUSH CONTROLS ON THE WIDE SIDE OF TOILETS.
<br />WATER HEATER SCHEDULE
<br />MARK
<br />FIXTURE
<br />COLD
<br />HOT
<br />DESCRIPTION
<br />APPROVED MANUFACTURERS
<br />WH-1
<br />ELECTRIC
<br />1"
<br />1"
<br />WATER HEATER:
<br />A.O. SMITH
<br />WATER HEATER
<br />50 GALLON CAPACITY, 12 KW AT
<br />NO. DEL-50D
<br />208V-1 0, AND 0.97% EFFICIENCY.
<br />PROVIDE WITH 3/4" TEMP., PRESSURE
<br />RELIEF VALVE, 3/4" DRAIN VALVE
<br />AND EXPANSION TANK.
<br />SET TEMPERATURE TO 1357.
<br />NOTE: REFER TO DETAIL FOR
<br />ACCESSORIES
<br />MIXING VALVE SCHEDULE
<br />MANUFACTURER
<br />ODEL
<br />ASSE LISTING
<br />SERVES
<br />S
<br />SETTING
<br />KITCHEN HAND SINKS
<br />WATTS
<br />LFMMV
<br />1107
<br />1070
<br />(LOCATE BELOW SINKS
<br />WITH ACCESS PANEL)
<br />LAVATORIES
<br />WATTS
<br />LFMMV
<br />1047
<br />1070
<br />(LOCATE BELOW LAV'S
<br />WITH ACCESS PANEL)
<br />*APPROVED EQUALS SHALL BE ZURN, SYMMONS AND BRADLEY
<br />BACKFLOW PREVENTER SCHEDULE
<br />MANUFACTURER
<br />MODEL
<br />ASSE LISTING
<br />SERVES
<br />WILKINS
<br />375XL-AG
<br />1013
<br />ICE MAKER FILTER -K22
<br />WILKINS
<br />375XL-AG
<br />1013
<br />WATER FILTER - K36C
<br />WILKINS
<br />375XL-AG
<br />1013
<br />STEAMER - K57
<br />WILKINS
<br />375XL-SXL-AG
<br />1013
<br />INCOMING WATER
<br />*APPROVED EQUALS SHALL BE WATTS AND APPOLO
<br />KITCHEN FIXTURE AND PIPE SIZING SCHEDULE
<br />MARK
<br />FIXTURE
<br />TRAP
<br />VENT
<br />COLD
<br />HOT
<br />DESCRIPTION
<br />APPROVED MANUFACTURERS
<br />K4
<br />3-COMPARTMENT
<br />(3)
<br />AS
<br />---
<br />---
<br />3-COMPARTMENT SINK:
<br />PROVIDED BY OTHERS
<br />SINK
<br />1 1 /2"
<br />SHOWN
<br />PLUMBING CONTRACTOR TO VERIFY
<br />(I.D.)
<br />ON
<br />NUMBER AND TYPE OF CONNECTIONS
<br />K5
<br />PRE -RINSE
<br />---
<br />PLANS
<br />1 /2"
<br />1 /2"
<br />WITH EQUIPMENT SUPPLIER AND MAKE
<br />FAUCET
<br />(135')
<br />PIPING CONNECTIONS AS REQUIRED.
<br />K21
<br />ICE MAKER
<br />2 3/4
<br />1/2"
<br />---
<br />ICE MAKER:
<br />PROVIDED BY OTHERS
<br />WITH BIN
<br />I.D.)
<br />FROM
<br />PLUMBING CONTRACTOR TO VERIFY
<br />K22
<br />NUMBER AND TYPE OF CONNECTIONS
<br />WITH EQUIPMENT SUPPLIER AND MAKE
<br />PIPING CONNECTIONS AS REQUIRED.
<br />K22
<br />WATER FILTER
<br />---
<br />1 /2"
<br />---
<br />WATER FILTER:
<br />PROVIDED BY OTHERS
<br />3-STAGE
<br />PLUMBING CONTRACTOR TO VERIFY
<br />NUMBER AND TYPE OF CONNECTIONS
<br />PROVIDE WATTS SERIES 9D
<br />WITH EQUIPMENT SUPPLIER AND MAKE
<br />DUAL CHECK VALVE ASSY.
<br />PIPING CONNECTIONS AS REQUIRED.
<br />WITH ATMOSPHERIC PORT
<br />K24
<br />PREP SINK
<br />11 /2"
<br />1 /2"
<br />1 /2"
<br />PREP SINK:
<br />PROVIDED BY OTHERS
<br />(I.D.)
<br />(135')
<br />PLUMBING CONTRACTOR TO VERIFY
<br />NUMBER AND TYPE OF CONNECTIONS
<br />WITH EQUIPMENT SUPPLIER AND MAKE
<br />PIPING CONNECTIONS AS REQUIRED.
<br />K31
<br />WORK TABLE WITH
<br />1 1 /2"
<br />1 /2"
<br />1 /2"
<br />WORK TABLE:
<br />PROVIDED BY OTHERS
<br />HAND SINK AND
<br />(I.D.)
<br />(110')
<br />PLUMBING CONTRACTOR TO VERIFY
<br />DUMP SINK
<br />1 1 /2"
<br />1 /2"
<br />1 /2"
<br />NUMBER AND TYPE OF CONNECTIONS
<br />(135')
<br />WITH EQUIPMENT SUPPLIER AND MAKE
<br />PIPING CONNECTIONS AS REQUIRED.
<br />K36
<br />BLENDER TABLE
<br />1 /2"
<br />---
<br />---
<br />BLENDER TABLE:
<br />PROVIDED BY OTHERS
<br />(I.D.)
<br />PLUMBING CONTRACTOR TO VERIFY
<br />NUMBER AND TYPE OF CONNECTIONS
<br />WITH EQUIPMENT SUPPLIER AND MAKE
<br />PIPING CONNECTIONS AS REQUIRED.
<br />K36A
<br />WATER SPIGOT
<br />---
<br />1 /2"
<br />---
<br />WATER SPIGOT
<br />PROVIDED BY OTHERS
<br />FROM
<br />PLUMBING CONTRACTOR TO VERIFY
<br />K36C
<br />NUMBER AND TYPE OF CONNECTIONS
<br />WITH EQUIPMENT SUPPLIER AND MAKE
<br />PIPING CONNECTIONS AS REQUIRED.
<br />K36C
<br />WATER FILTER
<br />---
<br />1 /2"
<br />---
<br />WATER FILTER:
<br />PROVIDED BY OTHERS
<br />2-STAGE
<br />PLUMBING CONTRACTOR TO VERIFY
<br />NUMBER AND TYPE OF CONNECTIONS
<br />WITH EQUIPMENT SUPPLIER AND MAKE
<br />PIPING CONNECTIONS AS REQUIRED.
<br />K38
<br />ICE BIN
<br />1"
<br />---
<br />---
<br />ICE BIN:
<br />PROVIDED BY OTHERS
<br />DROP -IN
<br />(I.D.)
<br />PLUMBING CONTRACTOR TO VERIFY
<br />NUMBER AND TYPE OF CONNECTIONS
<br />WITH EQUIPMENT SUPPLIER AND MAKE
<br />PIPING CONNECTIONS AS REQUIRED.
<br />K39
<br />HAND SINK
<br />1 1 /2"
<br />1 /2"
<br />1 /2"
<br />HAND SINK:
<br />PROVIDED BY OTHERS
<br />(110')
<br />PLUMBING CONTRACTOR TO VERIFY
<br />NUMBER AND TYPE OF CONNECTIONS
<br />WITH EQUIPMENT SUPPLIER AND MAKE
<br />PIPING CONNECTIONS AS REQUIRED.
<br />K57
<br />STEAMER
<br />---
<br />1 /2"
<br />---
<br />STEAMER:
<br />PROVIDED BY OTHERS
<br />(2 PROVIDED)
<br />PLUMBING CONTRACTOR TO VERIFY
<br />NUMBER AND TYPE OF CONNECTIONS
<br />WITH EQUIPMENT SUPPLIER AND MAKE
<br />PIPING CONNECTIONS AS REQUIRED.
<br />K62
<br />DRAIN BOARD
<br />1"
<br />---
<br />---
<br />DRAIN BOARD:
<br />PROVIDED BY OTHERS
<br />(I.D.)
<br />PLUMBING CONTRACTOR TO VERIFY
<br />NUMBER AND TYPE OF CONNECTIONS
<br />WITH EQUIPMENT SUPPLIER AND MAKE
<br />PIPING CONNECTIONS AS REQUIRED.
<br />PLUMBING ACCESSORY SCHEDULE
<br />MARK
<br />FIXTURE
<br />DESCRIPTION
<br />APPROVED MANUFACTURERS
<br />WCO
<br />WALL
<br />WALL CLEANOUT:
<br />ZURN
<br />CLEANOUT
<br />CAST IRON BODY, GAS AND WATERTIGHT
<br />NO. Z1445 (CLEANOUT TEE)
<br />THREAD PLUG, 6"0 SMOOTH
<br />NO. Z1469 (COVER)
<br />STAINLESS STEEL ACCESS COVER
<br />WADE
<br />WITH SECURING SCREW
<br />J.R. SMITH
<br />FCO
<br />FLOOR
<br />FLOOR CLEANOUT:
<br />ZURN
<br />CLEANOUT
<br />6" ROUND TOP, CAST IRON BODY, WITH
<br />NO. ZN-1400-BZ
<br />NICKEL BRONZE SCORIATED COVER &
<br />WADE
<br />FRAME, ADJUSTABLE GAS AND
<br />J.R. SMITH
<br />WATERTIGHT ABS THREAD PLUG
<br />FD
<br />FLOOR DRAIN
<br />FLOOR DRAIN:
<br />WADE
<br />6" ROUND, NICKEL BRONZE, HINGED
<br />NO. 1100-D6-1-3NH-ARC-27
<br />STRAINER, AR COATED CAST IRON BODY,
<br />ADJUSTABLE TOP, SEEPAGE OPENINGS,
<br />CLAMPING COLLAR AND SEDIMENT BUCKE
<br />FS
<br />FLOOR SINK
<br />FLOOR SINK:
<br />WADE
<br />AR COATED CAST IRON BODY, 12"x12"x8"
<br />NO. 914-1-3NH-16-110
<br />DEEP, WITH SEDIMENT BUCKET, 3/4
<br />ZURN
<br />NICKEL BRONZE GRATE AND 3" NO -HUB
<br />WATTS
<br />OUTLET. PROVIDE WITH DEEP SEAL TRAP.
<br />COORDINATE 3/4 GRATE WITH DRAIN
<br />FROM EQUIPMENT FURNISHED
<br />K23A
<br />CHANNEL DRAIN
<br />CHANNEL DRAIN:
<br />NDS
<br />K23B
<br />5" WIDE, 1 METER LONG POLYOLEFIN
<br />PRO -SERIES
<br />CHANNEL DRAIN WITH BUILT-IN SLOPE
<br />NO. 864GMTL DRAIN KIT
<br />OF 0.57., RADIUSED BOTTOM, 3" NO -HUB
<br />OUTLET AND REBAR TIE CUPS. PROVIDE
<br />K23A - 3'-4" LONG (1 UNIT)
<br />WITH SLOTTED STAINLESS STEEL GRATE
<br />K23B - 8'-4" LONG (2 UNITS)
<br />RP
<br />HOT WATER
<br />RECIRCULATION PUMP:
<br />GRUNDFOS
<br />RECIRCULATION
<br />INLINE CENTRIFUGAL, ALL BRONZE
<br />NO. UP25-64-SU
<br />PUMP
<br />CONSTRUCTION, 1 /12 HP, 120V-1 0, 5
<br />GPM AT 17 FEET OF HEAD
<br />GREASE RETAINMENT SYSTEM
<br />MARK
<br />FIXTURE
<br />INLET
<br />OUTLET
<br />DESCRIPTION
<br />MANUFACTURER
<br />GI
<br />GREASE
<br />4"
<br />4"
<br />GREASE INTERCEPTOR:
<br />SCHIER
<br />INTERCEPTOR
<br />SEAMLESS ROTATIONALLY -MOLDED
<br />GREAT BASIN NO. GB-75
<br />POLYETHYLENE INTERCEPTOR FOR
<br />RATED AT 75 GPM
<br />BELOW GRADE INSTALLATION WITH
<br />FIELD ADJUSTABLE RISER SYSTEM,
<br />BUILT-IN FLOW CONTROL, TEST
<br />CAPS AND 75 GPM FLOW RATE WITH
<br />653 LBS. GREASE CAPACITY.
<br />FOLLOW MANUFACTURER'S
<br />INSTALLATION REQUIREMENTS AND
<br />ALL STATE AND LOCAL CODES.
<br />PLUMBING GENERAL NOTES AND SPECIFICATIONS:
<br />• CONTRACTOR SHALL PROVIDE COMPLETE PLUMBING SYSTEMS AS DETAILED. WORK
<br />CONSISTS OF FURNISHING ALL MATERIALS, EQUIPMENT, AND SERVICES REQUIRED
<br />FOR COMPLETE SYSTEMS.
<br />• FLOOR PLANS SHOW APPROXIMATE LOCATION AND LAYOUT OF EXISTING PIPING ETC.
<br />CONTRACTOR SHALL VERIFY THE LOCATION OF THE SANITARY, WATER SERVICE AND
<br />VENTING SYSTEM PRIOR TO STARTING WORK.
<br />• CONTRACTOR SHALL COORDINATE ALL PIPING LOCATIONS AND INVERT ELEVATIONS WITH
<br />FOOTINGS AND FOUNDATIONS BEFORE INSTALLING AND ADJUST AS REQUIRED.
<br />• ARCHITECTURAL DRAWINGS TAKE PRECEDENCE OVER PLUMBING DRAWINGS WITH
<br />REFERENCE TO BUILDING CONSTRUCTION. PLUMBING DRAWINGS (PLANS, DIAGRAMS,
<br />ETC.) ARE DIAGRAMMATIC AND SHOULD NOT BE SCALED. THE CONTRACTOR SHALL
<br />COORDINATE ALL WORK UNDER THIS CONTRACT.
<br />• IF ANY DISCREPANCIES SHOULD EXIST THE CONTRACTOR SHALL NOTIFY THE ARCHITECT
<br />PRIOR TO BIDDING.
<br />• COORDINATE WORK WITH OTHER TRADES TO AVOID CONFLICTS.
<br />• NECESSARY REQUIRED PLUMBING ITEMS THAT ARE NOT SHOWN ON THE DRAWINGS
<br />DOES NOT RELIEVE THE CONTRACTOR FROM HIS RESPONSIBILITY TO INSTALL A
<br />COMPLETE OPERATING PLUMBING SYSTEM.
<br />• ALL NEW PLUMBING EQUIPMENT, MATERIALS, AND WORKMANSHIP SHALL BE GUARANTEED
<br />FOR A PERIOD OF ONE (1) YEAR FROM DATE OF ACCEPTANCE.
<br />• PROVIDE ALL CUTTING REQUIRED FOR THE INSTALLATION OF PLUMBING WORK. FINISH
<br />PATCHING SHALL BE COORDINATED WITH THE GENERAL CONTRACTOR.
<br />• ALL WATER PIPING SHALL BE: CHLORINATED POLYVINYL CHLORIDE (CPVC), SDR 11,
<br />ASTM D-2846, RATED AT A CONTINUOUS WORKING PRESSURE OF 100 PSI AT 1807.
<br />FITTING SHALL BE SOLVENT WELDED WITH AN ASTM APPROVED SOLVENT SYSTEM.
<br />DO NOT BEND PIPE WITH OVER A 45' ANGLE.
<br />• UNLESS OTHERWISE NOTED ALL PIPING SHALL BE RUN IN CONCEALED SPACES.
<br />• INSULATE ALL HOT WATER PIPING WITH 1" THICK HIGH DENSITY FIBERGLASS INSULATION
<br />WITH, FACTORY APPLIED VAPOR BARRIER ALL SERVICE JACKET.
<br />• FINAL WATER PIPING ROUTING SHALL BE COORDINATED WITH THE GENERAL CONTRACTOR.
<br />• ALL SOIL, WASTE, AND VENT PIPING SHALL BE SCHEDULE 40 PVC.
<br />• ALL HORIZONTAL SOIL AND WASTE PIPING 2 1/2" IN DIAMETER AND LESS SHALL HAVE
<br />A SLOPE OF 1 /4" PER ONE FOOT LENGTH OF PIPE. ALL PIPING 3" IN DIAMETER AND
<br />LARGER SHALL HAVE A SLOPE OF 1 /8" PER ONE FOOT LENGTH OF PIPE.
<br />• EXTEND ALL CONDENSATE AND INDIRECT DRAINS ON ALL KITCHEN EQUIPMENT TO FLOOR
<br />DRAINS OR FLOOR SINKS.
<br />• FURNISH AND INSTALL DEEP SEAL TRAPS AT FLOOR SINKS AND HUB DRAINS.
<br />• PROVIDE AND INSTALL TRAP PRIMER FOR FLOOR DRAIN.
<br />• CHROME PLATED ESCUTCHEONS AND NIPPLES ARE REQUIRED AT ALL FLOOR AND
<br />WALL PENETRATIONS.
<br />• ALL FIXTURES AND EQUIPMENT SHALL HAVE SHUT-OFF VALVES AT OR NEAR EQUIPMENT.
<br />• BALL VALVES SHALL BE TWO-PIECE, BRONZE ASTM B584 ALLOY BODY WITH BLOWOUT
<br />PROOF STEM.
<br />• PROVIDE AND INSTALL HAMMER ARRESTORS AT FIXTURE GROUPS. INSTALL AIR CHAMBERS
<br />AT INDIVIDUAL FIXTURES.
<br />• MAINTAIN AS -BUILT DRAWINGS, DAILY. SUBMIT TO ARCHITECT/OWNER AFTER
<br />COMPLETION OF ALL WORK.
<br />• PLUMBING CONTRACTOR SHALL ARRANGE TO PAY FOR ALL NECESSARY PERMITS,
<br />LICENSES, AND INSPECTIONS AS REQUIRED BY THE CITY.
<br />• ALL WORK SHALL COMPLY WITH ALL LOCAL AND STATE CODES, INCLUDING THE 2017
<br />FLORIDA BUILDING CODE, 6TH EDITION.
<br />• TO THE BEST OF THE ARCHITECT'S OR ENGINEER'S KNOWLEDGE, THE PLANS AND
<br />SPECIFICATIONS COMPLY WITH THE MINIMUM BUILDING CODES.
<br />PLUMBING LEGEND
<br />DESCRIPTION
<br />ABBREV.
<br />SYMBOL
<br />SANITARY PIPING
<br />SS
<br />GREASE PIPING
<br />GR
<br />GR
<br />VENT PIPING
<br />V
<br />------------
<br />COLD WATER PIPING
<br />CW
<br />- - -
<br />HOT WATER PIPING
<br />HW
<br />- - - -
<br />HOT WATER RETURN PIPING
<br />HRW
<br />- - - - - -
<br />EXISTING PIPING TO REMAIN
<br />FLOOR/EXTERIOR CLEAN OUT
<br />FCO/CO
<br />Q-
<br />t-WAY 2-WAY
<br />WALL CLEAN OUT
<br />WCO
<br />FLOOR DRAIN/FLOOR SINK
<br />FD/FS
<br />0 El
<br />HUB DRAIN
<br />HD
<br />SHUT-OFF VALVE
<br />_
<br />BALANCING VALVE
<br />CHECK VALVE
<br />CV
<br />w
<br />UNION�--
<br />NEW CONNECTION
<br />p
<br />5596 Rio Vista Drove
<br />PYRAMID aearwder, Florida 33760
<br />ENGINEEREVG = (727)531-2989 * Reg. No. ED6890
<br />CONSULTING ENGINEERS pyramid@pymaidenganeerisng.org
<br />�E
<br />M 0
<br />M U
<br />O
<br />M ,N
<br />acts
<br />ao
<br />J
<br />a •U
<br />.oa
<br />o Q
<br />0 0
<br />�
<br />N ..L.
<br />cn
<br />is
<br />'v
<br />z
<br />Ri
<br />w
<br />wa
<br />�0)
<br />r-
<br />w�
<br />a
<br />� o
<br />O'L J C
<br />� (� ,• �,�CENSF •..�� i
<br />�.
<br />tVo s46J •. -
<br />_ * 1��
<br />�® S ATE OF �\
<br />PE 45'4S1Hw\\\\
<br />No. 1910
<br />TITLE: PLUMBING NOTES,
<br />LEGEND AND -SCHEDULES
<br />7898 GALL BLVD.,
<br />ZEPHYRHILLS, FL 32541
<br />STORE AFL-280
<br />DATE
<br />ISSUE 07,03.19
<br />SHEET No
<br />P1
<br />■
<br />AA-0003276
<br />LAu .M
<br />
|