09-9335 - Laserfiche WebLink

Browse Search

APPLICATIONS DETECTOR SENSITIVITY TEST Use photoelectric detectors in life- safety applications to provide Each detector can have its sensitivity tested (required per NFPA a broad range of fire - sensing capability, especially where smol- 72, Chapter 7 on Inspection, Testing and Maintenance) when dering fires are anticipated. Ionization detectors are often better installed /connected to a FireWarden -100 addressable fire alarm than photoelectric detectors at sensing fast, flaming fires. control panel. The results of the sensitivity test can be printed off CONSTRUCTION the FireWarden -100 for record keeping. These detectors are constructed of off- white LEXAN®. NP- 100(T/ PRODUCT LINE INFORMATION A) plug -in, tow - profile smoke detectors are designed to commer- NOTE: A" suffix indicates ULC- Listed model. cial standards and offer an attractive appearance. NP -100 Addressable photoelectric detector (B71OLPbase LEXAN® is a registered trademark of GE Plastics, a subsidiary of sold separately). General Electric Company. NP -100A Same as NP -100 with ULC Listing (B710LPA base INSTALLATION sold separately). NP- 100(T /A) plug -in detectors use a detachable mounting base NP -100T Same as NP -100 but with thermal element (B710LP to simplify installation, service and maintenance. Mount base on base sold separately). box which is at least 1.5 inches (3.81 cm) deep. Suitable boxes NP -100TA Same as NP-100T with ULC Listing (B710LPA base include: sold separately). • 4.0" (10.16 cm) square box with plaster ring. RA400Z(A) Remote LED. Mounts to a single -gang box. • 4.0" (10.16 cm) octagonal box. • 3.5" (8.89 cm) octagonal box. B710LP(A) Plug -in detector base (sold separately). Dimen- • Single gang box. sions: 6.1" (15.5 cm). Mounting: 4.0" (10.16 cm) square box with or without plastic ring, 4.0" (10.16 NOTE: Because of the inherent supervision provided by the cm) octagonal box, 3.5" (8.89 cm) octagonal box, SLC loop, end -of -line resistors are not required. Wiring "T- or single -gang box. All mounting boxes have a mini - taps" or branches are permitted for Style 4 (Class B) wiring. mum depth of 1.5" (3.81 cm). OPERATION B224RB(A) Plug -in System Sensor relay detector base. Di- Each NP- 100(T /A) uses one of 99 possible addresses on the ameter: 6.2" (15.75 cm). Mounting: 4.0" (10.16 FireWarden -100 Signaling Line Circuit (SLC). It responds to regu- cm) square box with or without plastic ring, 4.0" lar polls from the system and reports its type and status. (10.16 cm) octagonal box, or 3.5" (8.89 cm) oc- The NP- 100(T /A) addressable photoelectric sensor's unique uni- tagonal box. All mounting boxes have a minimum polar chamber responds quickly and uniformly to a broad range depth of 1.5" (3.81 cm). of smoke conditions and can withstand wind gusts up to 4,000 B501BH(A) Plug -in System Sensor sounder detector base. feet -per- minute (20 m /sec.) without sending an alarm level sig- Diameter: 6.0" (15.24 cm). Mounting: 4.0" (10.16 nal. Because of its unipolar chamber, the NP- 100(T /A) is approxi- cm) square box with or without plastic ring. Mount - mately two times more responsive than most photoelectric sen- ing box has a minimum depth of 1.5" (3.81 cm). sors. This makes it a more stable detector. Page 2 of 2 - DN -6995 • 10/20/04