10-10030 - Laserfiche WebLink

Browse Search

The NH -100 Series offers features and performance that rep- box with or without plaster ring, 4.0' (10.16 cm) octagonal box, resent the latest in thermal detector technology. or 3.5" (8.89 cm) octagonal box. All mounting boxes have a minimum depth of 1.5" (3.81 cm). Spefications B501BH -2: Plug -in System Sensor standard sounder base. Diameter: 6.1" (15.5 cm) installed in B710LP. Diameter: 6.0" (15.24 cm). Mounting: 4.0" (10.16 cm) square box with or without plaster ring. Mounting boxes have a mini - Height: 2.1° (5.33 cm). mum depth of 1.5" (3.81 cm). Weight: 4.8 oz. (137 g). B501 BHT -2: Plug -in System Sensor temporal tone sounder Installation temperature: base. • NH -100, NH -100R: -4°F to 100 °F ( -20 °C to 38 °C). ACCESSORIES: • NH -100H: -4 °F to 150 °F ( -20 °C to 66 °C). RA400Z: Remote LED annunciator. 3 - 32 VDC. Mounts to a Humidity range: 10% to 93% relative humidity (noncon- U.S. single -gang electrical box. For use with B501 and densing). B710LP bases only. Voltage range: 15 to 32 VDC peak. SMK400E: Surface mounting kit provides for entry of surface Standby current: 300 pA © 24 VDC (one communication wiring conduit. For use with B501 base only. every five seconds with LED blink enabled). RMK400: Recessed mounting kit. For use with B501 base LED current: 6.5 mA © 24 VDC. only. Mounting: B710LP flanged base, included. MO2- 04 -0O:Test magnet. Fixed - temperature setpoint: 135 °F (57 °C) for the NH -100 MO2 -09 -00: Test magnet with telescoping handle. and NH -100R; 190 °F (88 °C) for the NH -100H. XR2B: Detector removal tool. Allows installation and /or removal Rate -of -rise detection: responds to greater than 15 °F (8.3 °C) of detector heads from bases in high ceiling applications. per minute. XP -4: Extension pole for XR2B. Comes in three 5 -foot (1.524 Altitude rating: 10,000 feet. m) sections. Listings and Approvals Listings and approvals below apply to the NH -100 Series detectors. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. • UL Listed, file S747. • CSFM approved: file 7270 - 0028:234. • MEA approved: file 387 -02 -E Vol. II. • FM approved. Product Line Information NH -100: Intelligent thermal sensor; 135° F (57° C) B710LP base included. NH -100R: Same as NH -100 with rate -of -rise feature; B710LP base included. NH -100H: Intelligent fixed high- temperature thermal detector; 190° F (88° C) B710LP base included. B710LP: Plug -in detector base (included). Dimensions: 6.1' (15.5 cm). Mounting: 4.0" (10.16 cm) square box with or with- out plaster ring, 4.0" (10.16 cm) octagonal box, 3.5" (8.89 cm) octagonal box, or single -gang box. All mounting boxes have a minimum depth of 1.5" (3.81 cm). B224RB: Plug -in System Sensor relay detector base. Diame- ter: 6.2" (15.75 cm). Mounting: 4.0" (10.16 cm) square box with or without plaster ring, 4.0" (10.16 cm) octagonal box, or 3.5" (8.89 cm) octagonal box. All mounting boxes have a mini- mum depth of 1.5" (3.81 cm). NOTIFIER® is a registered trademark of Honeywell International Inc. B224BI: Plug - System Sensor isolator detector base. Maxi - © 2009. AIII ' rights g rese ed. of this document is strictly mum 25 devices between isolator bases (see DN- 6994). prohibited. Diameter: 6.2" (15.75 cm). Mounting: 4.0" (10.16 cm) square ISO 9001 This document is not intended to be used for installation purposes. We try to keep our product information up -to -date and accurate. C E R T F E We cannot cover all specific applications or anticipate all requirements. MIME S 8 MNSALIUIIB All specifications are subject to change without notice. QUALITY SYSTEMS Made in the U.S. A. For more information, contact Notifier. Phone: (203) 484 -7161, FAX: (203) 484 -7118. www.notifier.com Page 2 of 2 - dn- 6997:b • 06/08/09