11-12625 - Laserfiche WebLink

Browse Search

4. Dimensioned shop drawings to include an ouUine af the ro� and appropriate details for flashings and terminations. 5. Certification from insulation, roafing and accessory cornpcments manufacturers that all materials supplied compfy with identified ASTM and industry standards. 6. Verification that system specifications meet atl identified code and insurance requirements induding but not limited to the following: a. Faetory Mutual Researoch Laboratories Non+vood, MA b. Underwriters Laboratories Northbrook, IL 7.04 Product Delivery, Storage and Handling A. All produds delivered to thejob site shall be in their original unapened containars or wrappings and clearly labeled with the manufadurer's name, product identification and date af' manufacture. B. Protect all materials from damage during transit, storage and delivery to the job site. Place all materials on pallets and protect from masture. C. Store all materials in a dry, dean area proteded from the elemerrts. All ydls of inembrane shall be stored flat on p�lets. D. All adhesive and caulking shall be stored at temperatunes between 60 `F and 80`F. E. All flammable materials shall be stored in a cool, dry area away from open flames and sparks. Follow precautions outlined on containers or supplied by the material manufadurer/supplier. F. All materials determined to have been damaged (confirmed by Mule-Hide) are to be replaced with new materials at no cost to the owner. 1.05 Job Conditions A. Mule-Hide PVC roofing materials may be ir�stalled under certain adverse wieather c�nditions such as high humidity or extreme temperatures, but only after consultation with the Mule-Hide Customer Service Department as special precautions or procedures may be necessary. The performanoe of the materials, installation costs and production rates may be affeded. B. Only as much new roofing as can be made watertight each day shall be installed each day. This includes all flashing work C. All substrates to receive new insulation, membrane orflashing shall be thoroughly dry and free of �ntaminants. Should surfacg masture occur, the contractor should pravide adequate equipment to dry the substrate prior to the application af new materials. � D. Prior to and during application, all dirt, debris and dust shall be removed from surfaces to be roofed for both new and reroofing substrates. E. On all reroof jobs and for all lightweight dedc systems, pullout tests shall be performed by the independent r�ng contractor, fastener manufacturer or owner's representative to verify the condition of the deck or substrate and to confi►m system design pullout values. 2