Laserfiche WebLink
PAft.T 2- PRODUCTS � <br /> 2.01 ACCEPTABLE MANUFACTURERS <br /> A. Bosch Security Systems, inc. <br /> 2.02 CONTROL PANELS <br /> A. Provide Bosch Model D9412GV4 Control Panel <br /> B Digital Alarm Communicator Transmitter <br /> 1 Digital alarm communicator transmitter(DACT) integral to the control panel shall <br /> be used to transmit alarm, supervisory and trouble signals to an approved off-site <br /> monitoring station as indicated in the engineering drawings. The DACT shall be <br /> UL listed for commercial fire reporting to an approved off-site monitoring station, <br /> and shall conform to the requirements of NFPA 72. <br /> 2. The D928 Dual Phone Line Switcher shall be utilized. <br /> C Auxiliary Power Supplies <br /> 1. Provide each auxiliary power supply(APS) unit in an individual, single, <br /> self-contained, lockable cabinet. Input shall be 120 volt AC nominal with an <br /> output of regulated 24 volt DC. Each APS shall be capable of actuation from <br /> either the control panel notification circuit, or programmed dry contacts. Each <br /> APS shall provide"trouble" indication to the control panel upon loss of AC power <br /> or abnormal conditions on individual output circuits. Each APS shall have a <br /> minimum of four(4) supervised output notification circuits rated individually at a <br /> minimum of two (2.0)amperes available per circuit, with a total output of eight <br /> (8 0)amps The Contractor shall be responsible for all redesign, circuiting, and <br /> additional equipment costs to provide the necessary output amperage Each <br /> APS shall have a minimum of twenty(20) percent spare capacity on each circuit, <br /> unless otherwise shown on the engineering drawings. <br /> 2. The APS shall operate from a dedicated 120 volt AC or 24 volt DC source with a <br /> listed secondary power source conforming to the same alarm and standby time <br /> requirements as the control panel <br /> 3 Acceptable manufacturer is Altronix AL802ULADA. <br /> D. Battery Charger <br /> 1. Provide a listed battery charger within an individual, single, self-contained, <br /> lockable cabinet. The battery charger shall be capable of 2 amps of 12 volt DC <br /> standby current. <br /> 2. The battery charger shall be capable of supervising up to two (2)12 volt 18 AH <br /> batteries independently for up to 36 AH of capacity. <br /> 3 Acceptable manufacturer is Bosch B520 <br /> Hobby Lobby—Zephyrhills, FL FIRE ALARM SYSTEM <br /> Issued for Permit—October 23, 2013 16720-8 <br />